(rewrite fun for new 2dsaver version for luma 13.2.1) |
m (small wording change) |
||
| (One intermediate revision by one other user not shown) | |||
| Line 11: | Line 11: | ||
{{Warning|text=2DSaver requires a modern [[Custom firmware|CFW]] setup running [[3DS:Boot9strap|boot9strap 1.2]] or higher. If you are running an older CFW setup, first [[3dsguide:checking-for-cfw|upgrade your setup]] before following these steps. If you do not have CFW installed you will need to install it with [[3dsguide:ntrboot|ntrboot]].}} | {{Warning|text=2DSaver requires a modern [[Custom firmware|CFW]] setup running [[3DS:Boot9strap|boot9strap 1.2]] or higher. If you are running an older CFW setup, first [[3dsguide:checking-for-cfw|upgrade your setup]] before following these steps. If you do not have CFW installed you will need to install it with [[3dsguide:ntrboot|ntrboot]].}} | ||
==What you need== | ==What you need== | ||
*The latest release of {{GitHub|hacks-guide/2DSaver/releases/ | *The latest release of {{GitHub|hacks-guide/2DSaver/releases/download/v1.1-hg1/2DSaver.zip|2DSaver}} (direct download) | ||
*The latest release of {{GitHub|LumaTeam/Luma3DS/releases/latest|Luma3DS}} (the Luma3DS <code>.zip</code> file) | *The latest release of {{GitHub|LumaTeam/Luma3DS/releases/latest|Luma3DS}} (the Luma3DS <code>.zip</code> file) | ||
==Prep Work== | ==Prep Work== | ||
#Power off your console | #Power off your console | ||
#Insert your SD card into your computer | #Insert your SD card into your computer | ||
#Copy <code>boot.firm</code> from the <code> | #Copy <code>boot.firm</code> from the Luma3DS <code>.zip</code> to the root of your SD card | ||
#Copy <code>boot.3dsx</code> from the <code> | #Copy <code>boot.3dsx</code> from the <code>2DSaver.zip</code> to the root of your SD card | ||
#Create a folder named <code>luma</code> on the root of your SD card, if it does not already exist | #Create a folder named <code>luma</code> on the root of your SD card, if it does not already exist | ||
#Copy <code>config.ini</code> from inside the folder for your console's region in the <code> | #Copy <code>config.ini</code> from inside the folder for your console's region in the <code>2DSaver.zip</code> to the <code>luma</code> folder on your SD card | ||
#Reinsert your SD card into your console | #Reinsert your SD card into your console | ||
==Section I - Launching 2DSaver== | ==Section I - Launching 2DSaver== | ||
| Line 30: | Line 30: | ||
#Power off your console | #Power off your console | ||
#Insert your SD card into your computer | #Insert your SD card into your computer | ||
# | #Enter the <code>luma</code> folder on the root of your SD card and delete <code>config.ini</code> | ||
#Reinsert your SD card into your console | #Reinsert your SD card into your console | ||
#Power on your console | #Power on your console | ||
# | #You should have booted to the Luma3DS configuration menu | ||
#Press {{B|Start}} to save and reboot | |||
{{Success|text=Done! Your console should now boot normally.}} | {{Success|text=Done! Your console should now boot normally.}} | ||
{{Warning|text=By skipping initial setup the following parameters were not set and will need to be edited or filled in through System Settings. Not changing these settings can lead to the eShop not working or other issues. | {{Warning|text=By skipping initial setup the following parameters were not set and will need to be edited or filled in through System Settings. Not changing these settings can lead to the eShop not working or other issues. | ||
Latest revision as of 10:59, 2 December 2024
| Developer(s) | zoogie |
|---|---|
| Console | Nintendo 3DS |
| Version | v1.1 (June 6, 2022) |
| Links | |
| GitHub | zoogie/2DSaver |
2DSaver is a 3DS homebrew app that allows initial setup to be skipped. This can be particularly helpful if your 3D slider is broken, or if your 2DS console is running downgraded firmware where initial setup does not account for a console with no 3D slider, preventing you from completing setup. 2DSaver works by running as boot.3dsx and using a modified configuration file for Luma3DS which sets the Title ID for title takeover to System Settings. This will then launch 2DSaver instead of initial setup; 2DSaver can then modify the ConfigNANDSavegame to skip initial setup.
 |
2DSaver requires a modern CFW setup running boot9strap 1.2 or higher. If you are running an older CFW setup, first upgrade your setup before following these steps. If you do not have CFW installed you will need to install it with ntrboot. |
What you need
- The latest release of 2DSaver (direct download)
- The latest release of Luma3DS (the Luma3DS
.zipfile)
Prep Work
- Power off your console
- Insert your SD card into your computer
- Copy
boot.firmfrom the Luma3DS.zipto the root of your SD card - Copy
boot.3dsxfrom the2DSaver.zipto the root of your SD card - Create a folder named
lumaon the root of your SD card, if it does not already exist - Copy
config.inifrom inside the folder for your console's region in the2DSaver.zipto thelumafolder on your SD card - Reinsert your SD card into your console
Section I - Launching 2DSaver
- Power on your console
- You should have booted into 2DSaver
- Press A to fix 3d slider brick
- Press Start to exit
- Your console will have booted to the HOME Menu, and should now boot normally
Section II - Resetting Luma Config
- Power off your console
- Insert your SD card into your computer
- Enter the
lumafolder on the root of your SD card and deleteconfig.ini - Reinsert your SD card into your console
- Power on your console
- You should have booted to the Luma3DS configuration menu
- Press Start to save and reboot
 |
Done! Your console should now boot normally. |
|
By skipping initial setup the following parameters were not set and will need to be edited or filled in through System Settings. Not changing these settings can lead to the eShop not working or other issues.
|