3DS:Fastboot3DS: Difference between revisions

fastboot3DS
Console	Nintendo 3DS
Version	v1.2
Links
GitHub	derrekr/fastboot3DS
Download
	GitHub release;
	v; t; e;

Revision as of 09:05, 23 June 2022

fastboot3DS is a firmware loader for the Nintendo 3DS. It works like boot9strap, but offers additional features such as:

A menu that can be accessed by holding (Home) on boot to perform certain actions
The ability to chainload payloads directly from fastboot3DS itself (instead of through Luma3DS)
- For example, you could configure it so that holding multiple buttons at once boots you into a payload
The ability to display a splash screen on startup, before Luma3DS has booted
The ability to backup / restore your NAND, as well as backup your bootroms and otp.bin
- The latter can no longer be done with boot9strap as of boot9strap v1.4, but can still be done through GodMode9
Compatibility with HOME Menu FIRM payload shortcuts, such as this one for open_agb_firm

Our guide installs boot9strap since it's what most end users will be fine with, but if you're a power user, then you may be interested in installing fastboot3DS.

While the installation of fastboot3DS is a generally safe process (equally safe as installing boot9strap), there is still a chance that something goes catastrophically wrong. Installing fastboot3DS (just like boot9strap) involves writing to the 3DS's FIRM partitions, so if something goes wrong, you may need ntrboot to fix it.

Troubleshooting may differ for some situations (generally for things relating to FIRM-based payloads) when fastboot3DS is installed, so you should disclose that when getting help with such a situation.

Installation

What you need

The latest release of fastboot3DS (the .7z file)
The latest release of OpenFirmInstaller (the OpenFirmInstaller .zip file)

Section I - Prep Work

Insert your SD card into your computer
Create a folder named ofi on the root of your SD card
Copy fastboot3DS.firm from the fastboot3DS .7z file to the ofi folder
Copy OpenFirmInstaller.firm from the OpenFirmInstaller .zip file to the /luma/payloads/ folder
Remove your SD card and put it back into your 3DS

Section II - OpenFirmInstaller

Hold (Start), then power on your device while still holding (Start) to enter the Luma3DS chainloader
Navigate to "OpenFirmInstaller" in the list, then press (A)
Follow the on-screen prompts to install fastboot3DS

fastboot3DS has been successfully installed!

Configuration

WIP

@@ Line 2: / Line 2: @@
 | title = fastboot3DS
 | for3ds = 1
-| version = 1.2
+| version = v1.2
-| releasedate = 2019-01-23
 | github = derrekr/fastboot3DS
 | githubtag = v1.2
 }}
-{{shortcut|3DS:FB3DS}}
 '''fastboot3DS''' is a firmware loader for the Nintendo 3DS. It works like [[3DS:boot9strap|boot9strap]], but offers additional features such as:
-* A menu that can be accessed by holding {{B|HOME}} on boot to perform certain actions
+* A menu that can be accessed by holding (Home) on boot to perform certain actions
-* The ability to chainload payloads directly from fastboot3DS (instead of through Luma3DS)
+* The ability to chainload payloads directly from fastboot3DS itself (instead of through Luma3DS)
-** Additionally, fastboot3DS's chainloader can make a payload boot only when holding ''multiple'' buttons
+** For example, you could configure it so that holding ''multiple'' buttons at once boots you into a payload
-** Also note that fastboot3DS's chainloader acts before Luma3DS, so {{B|L}}, {{B|R}}, and {{B|START}} can be used by themselves without consequence. {{B|SELECT}} should only be used with other buttons to avoid making the [[3DS:Luma3DS/Configuration|Luma3DS configuration]] menu inaccessible, however, and {{B|ZL}}, {{B|ZR}} and {{B|HOME}} are still unusable
 * The ability to display a splash screen on startup, before Luma3DS has booted
 * The ability to backup / restore your NAND, as well as backup your bootroms and otp.bin
 ** The latter can no longer be done with boot9strap as of boot9strap v1.4, but can still be done through GodMode9
-* Compatibility with HOME Menu FIRM payload shortcuts, such as [https://gbatemp.net/download/open-agb-launcher.36828/ Open AGB Launcher] for [[3DS:open_agb_firm|open_agb_firm]] and its base program, {{GitHub|SUOlivia/That-Shortcut-Thingy|That-Shortcut-Thingy}}
+* Compatibility with HOME Menu FIRM payload shortcuts, such as [https://gbatemp.net/download/open-agb-launcher.36828/ this one] for [[3DS:open_agb_firm|open_agb_firm]]
 [[3dsguide:index|Our guide]] installs boot9strap since it's what most end users will be fine with, but if you're a power user, then you may be interested in installing fastboot3DS.
@@ Line 23: / Line 20: @@
 {{warning|While the installation of fastboot3DS is a generally safe process (equally safe as installing boot9strap), there is still a chance that something goes catastrophically wrong. Installing fastboot3DS (just like boot9strap) involves writing to the 3DS's FIRM partitions, so if something goes wrong, you may need ntrboot to fix it.}}
-{{info|Two things you should know:
+{{info|Troubleshooting may differ for some situations (generally for things relating to FIRM-based payloads) when fastboot3DS is installed, so you should disclose that when getting help with such a situation.}}
-* Troubleshooting may differ for some situations (generally for things relating to FIRM-based payloads) when fastboot3DS is installed, so you should disclose that when getting help with such a situation.
-* The vast majority of pages on this wiki, and in fact most guides on the internet, will assume that you're using a boot9strap-based installation. If you choose to install fastboot3DS, you'll need to adapt the wiki's instructions to your personal setup (and/or figure it out on your own). This usually will not cause noticeable changes unless <code>.firm</code> payloads are involved.}}
 == Installation ==
@@ Line 42: / Line 37: @@
 === Section II - OpenFirmInstaller ===
-# Hold {{B|Start}}, then power on your device while still holding {{B|Start}} to enter the Luma3DS chainloader
+# Hold (Start), then power on your device while still holding (Start) to enter the Luma3DS chainloader
-# Navigate to "OpenFirmInstaller" in the list, then press {{B|A}}
+# Navigate to "OpenFirmInstaller" in the list, then press (A)
 # Follow the on-screen prompts to install fastboot3DS
 {{success|text=fastboot3DS has been successfully installed!}}
-== Usage ==
-The most common guides are listed at [[3DS:Fastboot3DS/Usage|fastboot3DS usage]].
 == Configuration ==
-All of fastboot3DS' config is in the on-boot menu, in the <code>Boot setup...</code> section. The options are as follows:
+WIP
-* '''Setup [slot X]''': For any slot '''X''', allows you to configure what and where the boot slot boots. There are six slots, and they will be tried in ascending order - keycombo slots will always be tried before autoboot slots if any keys are held during boot.
-**'''Select [slot X] firm''': When chosen, lets you pick a <code>.firm</code> file from anywhere on SD or NAND to boot in this slot.
-**'''Set [slot X] keycombo''': When enabled, this FIRM will boot when the configured keycombo is held. To configure it, hold the keys you want to use for 3 seconds.
-**'''Set [slot X] autoboot''': When enabled, this FIRM will boot automatically once all previous autoboot slots fail.
-**'''Disable [slot X]''': When enabled, this slot will not boot anything even if all other slots fail.
-*'''Change boot mode''': Alters how the fastboot3DS on-boot menu is handled.
-**'''Set normal boot''': When enabled, always plays the selected splash and opens to the fastboot3DS menu when booting.
-**'''Set quick boot''': When enabled, always plays the selected splash and continues to the first slot available. Holding HOME opens the fastboot3DS menu instead.
-**'''Set quiet boot''': When enabled, ignores the splash and continues to the first slot available. Holding HOME plays the selected splash and opens the fastboot3DS menu instead.
-*'''Change splash''': Lets you choose what and when the on-boot splash is.
-**'''Use custom splash...''': When enabled, lets you choose a folder containing <code>.bin</code> image files from anywhere on SD or NAND, and converts them to <code>splash.spla</code> and <code>splashbottom.spla</code> to be used as a splash. '''Note:''' Fastboot3DS cannot use splashes zipped in a <code>.zip</code> file, they will need unzipped in order to be used.
-**'''Use default splash''': When enabled, uses the default splash without any file option.
-**'''Set splash duration...''': When chosen, lets you modify the splash duration using {{B|D-Pad Left}} and {{B|D-Pad Right}} in 250ms increments, or {{B|D-Pad Up}} and {{B|D-Pad Down}} in 1000ms increments. Splashes can have a minimum duration of 500ms and maximum duration of 10000ms.
-*'''Enable FCRAM Boot''': When enabled, allows for HOME Menu payload shortcuts through {{GitHub|SUOlivia/That-Shortcut-Thingy|That-Shortcut-Thingy}}
-==File layout==
-{{Tree list}}
-* {{Tree icon|sd}} (root)
-** {{Tree icon|d}} 3ds
-*** {{Tree icon|f}} fastbootcfg.txt
-* [1:] SYSNAND CTRNAND
-** {{Tree icon|d}} fastboot3DS
-*** {{Tree icon|f}} fastbootcfg.txt
-{{Tree list/end}}