3DS:Hardware test: Difference between revisions

3DS:Hardware test (view source)

Revision as of 02:25, 24 November 2023

No change in size , 11 months ago

Undo revision 4810 by Botman (talk)

StarlitSkies

Approver, confirmaccount

398

edits

@@ Line 21: / Line 21: @@
 <tabber>
+|-|ntrboot=
+'''If you do not have a flashcart compatible with ntrboot, choose a different option.'''
+<span>
+# Ensure you already have a flashcart with ntrboot flashed. If you haven't flashed your flashcart with ntrboot yet, refer to [https://3ds.hacks.guide/ntrboot this page.]
+# Power off the console and insert your SD card into your computer.
+# Copy <code>3ds_hw_test.firm</code> to the root of your SD card.
+# Rename <code>boot.firm</code> to <code>luma.firm</code>.
+# Rename <code>3ds_hw_test.firm</code> to <code>boot.firm</code>.
+# Reinsert the SD card into your console.
+# Insert the flashcart flashed with ntrboot into your console.
+# Put the magnet into position to trigger the lid sensor. Refer to [https://i.imgur.com/5e3lKe2.png this image for reference.]
+#* Note, 2DS users will not need a magnet, as their device cannot physically fold. Instead, move the sleep switch to the right.
+# Press and hold {{Key press|START|SELECT|X}}, then briefly press and hold the power button for 2 to 3 seconds.
+# Your console should now be booted into 3ds_hw_test. If it did not boot and instead booted into the HOME menu, power off and try again. This can take a few attempts to get the magnet positioning correct.
+# Press any button to start the test.
+#* The test will take around 30 minutes for an old model and around 45 for a new model.
+#** If you are unsure what model the console is, look at the shoulder buttons - a new model has four ({{Key press|L|ZL|ZR|R}}), and an old model has two ({{Key press|L|R}}
+# When the test finishes, press any button to turn the console off and insert your SD into your computer.
+# Open the newly generated <code>sd:/HWTEST.LOG</code> file in a text editor, then scroll to the end and look at the line that says <code>[ARM11] Done. ___ total errors detected.</code>.
+#* If the number on this line is 0, your console's RAM is not the issue.
+#* If the number on this line is not 0, your console's RAM is dying and you need to either repair or replace the motherboard.
+# Delete <code>boot.firm</code> and rename <code>luma.firm</code> to <code>boot.firm</code>.
+</span>
 |-|boot9strap=
@@ Line 92: / Line 116: @@
 #* If the number on this line is 0, your console's RAM is not the issue.
 #* If the number on this line is not 0, your console's RAM is dying and you need to either repair or replace the motherboard.
-|-|ntrboot=
-'''If you do not have a flashcart compatible with ntrboot, choose a different option.'''
-<span>
-# Ensure you already have a flashcart with ntrboot flashed. If you haven't flashed your flashcart with ntrboot yet, refer to [https://3ds.hacks.guide/ntrboot this page.]
-# Power off the console and insert your SD card into your computer.
-# Copy <code>3ds_hw_test.firm</code> to the root of your SD card.
-# Rename <code>boot.firm</code> to <code>luma.firm</code>.
-# Rename <code>3ds_hw_test.firm</code> to <code>boot.firm</code>.
-# Reinsert the SD card into your console.
-# Insert the flashcart flashed with ntrboot into your console.
-# Put the magnet into position to trigger the lid sensor. Refer to [https://i.imgur.com/5e3lKe2.png this image for reference.]
-#* Note, 2DS users will not need a magnet, as their device cannot physically fold. Instead, move the sleep switch to the right.
-# Press and hold {{Key press|START|SELECT|X}}, then briefly press and hold the power button for 2 to 3 seconds.
-# Your console should now be booted into 3ds_hw_test. If it did not boot and instead booted into the HOME menu, power off and try again. This can take a few attempts to get the magnet positioning correct.
-# Press any button to start the test.
-#* The test will take around 30 minutes for an old model and around 45 for a new model.
-#** If you are unsure what model the console is, look at the shoulder buttons - a new model has four ({{Key press|L|ZL|ZR|R}}), and an old model has two ({{Key press|L|R}}
-# When the test finishes, press any button to turn the console off and insert your SD into your computer.
-# Open the newly generated <code>sd:/HWTEST.LOG</code> file in a text editor, then scroll to the end and look at the line that says <code>[ARM11] Done. ___ total errors detected.</code>.
-#* If the number on this line is 0, your console's RAM is not the issue.
-#* If the number on this line is not 0, your console's RAM is dying and you need to either repair or replace the motherboard.
-# Delete <code>boot.firm</code> and rename <code>luma.firm</code> to <code>boot.firm</code>.
-</span>
 </span>