Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

3DS:Alternate Exploits/Homebrew Launcher (smilehax-IIe)/JPN

From Hacks Guide Wiki
< 3DS:Alternate Exploits‎ | Homebrew Launcher (smilehax-IIe)This is the approved revision of this page, as well as being the most recent.

Required Reading

smilehax-IIe is an exploit for the game "SmileBASIC" made by zoogie, compatible with System Versions 9.0.0 through 11.16.0 for USA/EUR/JPN region consoles. It is used to launch the Homebrew Launcher. The JPN version of the game has a different route that will not be covered on this page.

What You Need

  • The game "SmileBASIC", available on the Nintendo eShop
  • The latest release of Luma3DS
  • The latest release of smilehax-IIe

Instructions

Section I - Prep Work

  1. Make sure SmileBASIC is updated to the latest version
  2. Power off your console
  3. Insert your SD card into your computer
  4. Copy boot.firm and boot.3dsx from the Luma3DS .zip to the root of your SD card
    • The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
  5. Copy new3ds_JPN.bin or old3ds_JPN.bin (depending on your model) from otherapps_with_CfgS_11.17.zip to the root of your SD card, then rename the file to otherapp.bin
  6. Transfer SH2E-JPN.300.wav from the Release_sh2e .zip to a device that can play .wav files, for example a phone
  7. Navigate to Nintendo 3DS -> <ID0> -> <ID1> -> title -> 0004000e
  8. Rename the 00117200 folder to _00117200
  9. Reinsert your SD card into your console
  10. Power on your console

Section II - smilehax

  1. Launch SmileBASIC
    • Do not update the game if asked
  2. Select the "Publish/Download Projects" option
  3. Select the "Download (Receive) using Public Key" option
  4. Press the "Yes" button
  5. Enter the Public Key "NJEQK3A4" using the on-screen keyboard
  6. Press the "Yes" button to confirm the download of PMODEM141
  7. Press "OK", then "Back", then "Browse Projects"
  8. Select PMODEM141, then press "Select File"
  9. Select PMODEM141.PRG, then Press "OK", then "Yes" to execute it
  10. Select RECEIVE FILE SIMPLEX
  11. Prepare the device you use to play the .wav file
  12. Keep your console about a foot from the .wav file playing devices' speaker and use a reasonable (not loud) volume to play the.wav
  13. Now select 300BPS, then play the .wav file
  14. When it finishes, Press "Yes", then press "OK"
  15. Press the START button
  16. Select the SH2E-JPN.TXT file, then press OK, then "Yes" to execute it
  17. Your device should load into the Homebrew Launcher

Next steps

At this point, there are a number of processes you may follow. Continue to the next section of the guide based on what you have access to.

Method Requirements
--- Working shoulder buttons System version
Installing boot9strap (nimdsphax) No Latest
Installing boot9strap (uloader) No 11.15.0 or lower