Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

Wii U:Alternate Exploits/UDPIH

From Hacks Guide Wiki
< Wii U:Alternate ExploitsThis is the latest revision of this page; it has no approved revision.

You should really only follow this if you were redirected here due to unable to use the browser for some reason.

What you need

SD Prep

  1. Copy the contents of the downloaded Aroma .zip files to the root of your SD Card.
  2. Copy the recovery_menu file from the recovery_menu.zip to the root of your SD Card.
  3. Copy the PayloadLoader Installer.wuhb from the PayloadLoader Installer .zip to sd:/wiiu/apps on your SD Card.
  4. Copy the root.rpx file from sd:/wiiu/environments/aroma to root of the SD Card, and rename to launch.rpx.
  5. Insert the SD Card into the Wii U.

UDPIH

  1. Shut off your Wii U, if it was on.
  2. Unplug the Wii U from power, and then replug it.
  3. Power on your Wii U.
  4. As soon as you see the Wii U logo, plug in your UDPIH device.
  5. Load any application. You should now see the EnvironmentLoader.
  6. Navigate to and select the aroma environment.
  7. Select Wii U Menu.
  8. At the Wii U Menu, launch the PayloadLoader Installer.
  9. Press A to Check.
  10. Press A on Install / Update.
  11. You’ll be asked if you are sure you want to install the PayloadLoader. Use the D-Pad to select Install and press A.
  12. Press A to shut down the console.

NAND Backup

OOjs UI icon information-warning.svg A NAND Backup cannot be done without a GamePad. Please get a GamePad ASAP to perform a NAND Backup.
  1. Power on the console.
  2. Launch the Health and Safety application while holding B.
  3. Select nanddumper.
  4. Make the settings look like this and then press A. MLC is optional as it is the biggest part of the NAND Backup (8gb or 32gb depending on your model).
    • SLC: Yes
    • SLCCMPT: Yes
    • MLC: Optional
    • OTP: Yes
    • SEEPROM: Yes
  5. Wait for it to finish. It may take a few hours if you opted to dump MLC.
  6. To make sure you don’t lose the files, copy the slc.bin, slccmpt.bin, seeprom.bin, otp.bin and if you chose to go with a full backup, every mlc.bin.part file to your computer.
  7. Delete the files to free up space on the SD Card.

Autobooting PayloadLoader

OOjs UI icon information-progressive.svg This section is optional. If you do not want to autoboot into the PayloadLoader, then skip to Finalizing Setup.
  1. Start the console to boot into the Wii U Menu, launch the Health and Safety Information app.
  2. Navigate the list using the D-Pad and navigate to the aroma environment, press A to launch it.
  3. Select Wii U Menu.
  4. At the Wii U Menu, launch the PayloadLoader Installer.
  5. Press A to select Check.
  6. Select Boot Options.
  7. You will be asked if you want to switch the boot title. Press A to select Switch to PayloadLoader.
  8. When the process finished, press A to shutdown the console.
  9. The PayloadLoader will now be launched automatically on every boot.

Finalizing Setup

The main guide already has a page for this. You can find it here