3DS:Error screens/Luma3DS ErrDisp: Difference between revisions

Revision as of 05:05, 4 May 2023

3DS:ERRDISP

With Luma3DS installed, the 3DS error handler is modified to give significantly more information compared to the default error screens.

This page lists various causes and solutions of Luma3DS ErrDisp errors.

Reading a Luma3DS ErrDisp

With Luma3DS insa ErrDisp error has several parts, but only two of them help in finding its cause. They are as follows:

Process name: The part of the system that is triggering the error. Can be helpful if the error code is generic.
Error code: The specific reason the error occurred. This is almost always the most helpful part of the error.

Known errors

If your ErrDisp displays one of the processes in the first table, you do not need to look up its error code in the second one. The solutions for these processes are almost always the same.

Process Name	Problem & Solution
process: cam process: qtm	Your camera's hardware is damaged or dead. If the error code is `0xF96183FE`, you can open `sd:/luma/config.ini` and set the variable `enable_safe_firm_rosalina` to 1 to bypass this error. Otherwise, to fix, replace the camera with a new one. To avoid the error until then or if you cannot get a new camera, disconnect the camera.
process: kernel	Your system software is having a strange issue. To fix, diagnose further by reading the contents of the file `sd:/luma/errdisp.txt`. If you do not understand this file, join the [Nintendo Homebrew Discord] and explain your issue there.
process: nwm	Your WiFi chipset's hardware is damaged or dead. To fix, replace the WiFi chipset with a new one. To avoid this error until then or if you cannot get a new chipset, disable WiFi on the 3DS and do not turn it back on. If your 3DS is an old model, you can disable WiFi with an external switch. New models must instead disable it through the HOME Menu Settings or Rosalina. Repeatedly pressing the keycombo for Rosalina while powering on may allow you to access Rosalina before it can crash.
process: mcu	Something related to power or the battery is having issues. To fix, check if your charger repeatedly disconnects and reconnects while it is inserted. If this is the case, you have a faulty charger port and need to replace it. If this is not the case, you have a deeper hardware issue that may not be fixable.

In the following table, when ? is in an error code, it is a wildcard.
This means any character can be in its position and the error code will remain the same.

Error Code	Problem & Solution
card removed	Your SD card is faulty, or debris is interfering with its connection to the 3DS. To fix, clean the SD card and the SD reader in the 3DS with isopropyl alcohol. If this does not work, test the SD card for errors.
0xC86044D2	Your NAND does not have enough free space available. To fix, join the [Nintendo Homebrew Discord] and explain your issue in detail. Deleting files from the NAND without guidance is likely to cause additional issues.
0xC8804478	The app you tried to open or system software it relies on is missing. If this occurs when you open any DS game or DS Download Play, follow TWLFix.
0xC8804471 0xC8804497 0xC88044A?	Some dependency of the app you are trying to open does not exist. Ensure your SD is inserted, especially if the code is C88044AB specifically. If it is, ensure you have all of the necessary files for what you are trying to do. If you do have the files and it is happening to a digital title, do a Safe Mode update. If you do have the files and it is happening to a cartridge, either your 3DS or the cartridge likely has a hardware issue.
0xC8A04573	Your SD card is formatted strangely. To fix, reformat the SD card. If this does not work, test the SD card for errors.
0xC8A0802B	If this happened while installing an application, your `title.db` does not exist or is corrupted. To fix, open the eShop and download something - even a demo or an update for a game you do not have will work. If this does not fix the issue, rebuild `title.db` and then try again.
0xC92044EB 0xC92044FA 0xC960454?	Your SD card is set to read-only or is faulty. To fix, make sure the slider on the left side of the SD card is pushed up, use a different SD adapter if you are currently using one, and test the SD for errors if it is not read-only. If the error still happens, the SD card is likely faulty. If it is also read-only, it has permanently protected itself to prevent data corruption. Either way, back up its contents and get a new SD.
0xD8E0806A	You have developer UNITINFO enabled and are trying to install a retail game. To fix, go into the file `sd:/luma/config.ini` and set the variable `use_dev_unitinfo` to 0.
0xD860446?	You are attempting to use more processing power than the console currently has available. To fix, ensure you are not using a mod that is designed for an emulator rather than native hardware. If you are using such a mod, either toggle off any "Extra RAM" setting or use a different mod.
0xD900458?	The app you tried to open, its savedata, or an update file for it is corrupted. To fix, if it is a cartridge dump, redump it. If it is an eShop game, click the Repair button at the bottom of its eShop page or delete and reinstall it. If it is a cartridge, clean the cartridge and the 3DS cartridge reader with isopropyl alcohol.

@@ Line 1: / Line 1: @@
 {{shortcut|3DS:ERRDISP}}
-With Luma3DS installed, the 3DS error handler is modified to give significantly more information compared to [[3DS:Error screens/Nintendo error screen|the default error screens]]. These errors are also displayed by certain other applications such as [[3DS:FBI|FBI]].
+With Luma3DS installed, the 3DS error handler is modified to give significantly more information compared to [[3DS:Error screens/Nintendo error screen|the default error screens]].
 This page lists various causes and solutions of Luma3DS ErrDisp errors.
@@ Line 6: / Line 6: @@
 ==Reading a Luma3DS ErrDisp==
-A Luma3DS ErrDisp error has several parts, but only two of them help in finding its cause. They are as follows:
+With Luma3DS insa ErrDisp error has several parts, but only two of them help in finding its cause. They are as follows:
 [[File:Luma3DS ErrDisp.jpg|center]]
 * '''Process name:''' The part of the system that is triggering the error. Can be helpful if the error code is generic.
@@ Line 24: / Line 24: @@
 | Your camera's hardware is damaged or dead.
 :If the error code is <code>0xF96183FE</code>, you can open <code>sd:/luma/config.ini</code> and set the variable <code>enable_safe_firm_rosalina</code> to 1 to bypass this error.
-:Otherwise, to fix, replace the camera with a new one. To avoid the error until then, or if you cannot get a new camera, disconnect the camera.
+:Otherwise, to fix, replace the camera with a new one. To avoid the error until then or if you cannot get a new camera, disconnect the camera.
 |-
 | process: '''kernel'''
 | Your system software is having a strange issue.
-:To fix, diagnose further by reading the contents of the file <code>sd:/luma/errdisp.txt</code>. If you do not understand this file, join the [https://discord.gg/nintendohomebrew Nintendo Homebrew Discord] and explain your issue there.
+:To fix, diagnose further by reading the contents of the file <code>sd:/luma/errdisp.txt</code>. If you do not understand this file, join the [[https://discord.gg/nintendohomebrew Nintendo Homebrew Discord]] and explain your issue there.
+|-
+| process: '''nwm'''
+| Your WiFi chipset's hardware is damaged or dead.
+:To fix, replace the WiFi chipset with a new one. To avoid this error until then or if you cannot get a new chipset, disable WiFi on the 3DS and do not turn it back on.
+:If your 3DS is an old model, you can disable WiFi with an external switch. New models must instead disable it through the HOME Menu Settings or Rosalina. Repeatedly pressing the keycombo for Rosalina while powering on may allow you to access Rosalina before it can crash.
 |-
 | process: '''mcu'''
@@ Line 34: / Line 39: @@
 :To fix, check if your charger repeatedly disconnects and reconnects while it is inserted. If this is the case, you have a faulty charger port and need to replace it.
 :If this is not the case, you have a deeper hardware issue that may not be fixable.
-|-
-| process: '''nwm'''
-| Your WiFi chipset's hardware is damaged or dead.
-:To fix, replace the WiFi chipset with a new one. To avoid this error until then or if you cannot get a new chipset, disable WiFi on the 3DS and do not turn it back on.
-:If your 3DS is an old model, you can disable WiFi with an external switch. New models must instead disable it through the HOME Menu Settings or Rosalina. Repeatedly pressing the keycombo for Rosalina while powering on may allow you to access Rosalina before it can crash.
 |}
@@ Line 52: / Line 52: @@
 | 0xC86044D2
 | Your NAND does not have enough free space available.
-:To fix, join the [https://discord.gg/nintendohomebrew Nintendo Homebrew Discord] and explain your issue in detail. Deleting files from the NAND without guidance is likely to cause additional issues.
+:To fix, join the [[https://discord.gg/nintendohomebrew Nintendo Homebrew Discord]] and explain your issue in detail. Deleting files from the NAND without guidance is likely to cause additional issues.
-|-
-| 0xC8804464<br>0xC8804471<br>0xC8804497<br>0xC88044A?
-| Some dependency of the app you are trying to open does not exist.
-:Ensure your SD is inserted, especially if the code is C88044AB specifically. If it is, ensure you have all of the necessary files for what you are trying to do.
-:If you are specifically getting 0xc8804471 when opening an out-of-region game, it means it needs [[3DS:Setting Game Locales|locale emulation]] to function properly.<br>If you do have the files and it is happening to a digital title, [[3DS:Safe Mode|do a Safe Mode update.]]<br>If you do have the files and it is happening to a cartridge, either your 3DS or the cartridge likely has a hardware issue.
 |-
 | 0xC8804478
 | The app you tried to open or system software it relies on is missing.
 :If this occurs when you open any DS game or DS Download Play, follow [[3DS:TWLFix|TWLFix]].
-:If this occurs after doing a manual CTRTransfer, Lazarus3DS, or the nim module errors, check in GodMode9 whether the file path <code>1:/private/movable.sed</code> exists. If it does not, you will need to manually restore <code>movable.sed</code> from a backup. Join the [https://discord.gg/nintendohomebrew Nintendo Homebrew Discord] and ask for help with this.
+|-
+| 0xC8804471<br>0xC8804497<br>0xC88044A?
+| Some dependency of the app you are trying to open does not exist.
+:Ensure your SD is inserted, especially if the code is C88044AB specifically. If it is, ensure you have all of the necessary files for what you are trying to do.<br>If you do have the files and it is happening to a digital title, [[3DS:Safe Mode|do a Safe Mode update.]]<br>If you do have the files and it is happening to a cartridge, either your 3DS or the cartridge likely has a hardware issue.
 |-
 | 0xC8A04573
@@ Line 70: / Line 68: @@
 | 0xC8A0802B
 | If this happened while installing an application, your <code>title.db</code> does not exist or is corrupted.
-:To fix, follow one of the two following sets of instructions. The second one will delete all installed games/apps as a side effect, but is significantly faster and simpler.
+:To fix, open the eShop and download something - even a demo or an update for a game you do not have will work.
-:#[[3DS:Rebuild Title Database|rebuild <code>title.db</code>]] and then try again.
+::If this does not fix the issue, [[3DS:Rebuild Title Database|rebuild <code>title.db</code>]] and then try again.
-:#Open GodMode9, go into the file path <code>1:/dbs/</code> and delete any existing <code>title.db</code>, then press {{B|R}}+{{B|Y}}, choose '''Create a dummy file''', and name this file <code>title.db</code> - leave the file size at 0. Once the file is created, press {{B|START}} to reboot, go into System Settings -> Data Management -> Nintendo 3DS -> Software, and choose '''Yes''' if a prompt about management information appears.
-|-
-|0xC8A11BEF
-|Occurs when attempting to use DLP services with an out-of-region game. This issue is not fixable currently.
 |-
 | 0xC92044EB<br>0xC92044FA<br>0xC960454?
@@ Line 81: / Line 75: @@
 :To fix, make sure the slider on the left side of the SD card is pushed up, use a different SD adapter if you are currently using one, and [[Checking SD card integrity|test the SD for errors]] if it is not read-only.
 :If the error still happens, the SD card is likely faulty. If it is also read-only, it has permanently protected itself to prevent data corruption. Either way, back up its contents and get a new SD.
-If the error is happening when launching a cartridge, especially if the error code is 0xC960454?, delete any updates or DLC to see if the cartridge works as they could be corrupt or faulty. If this succeeds, reinstall them from eShop and ensure the cartridge still works.
+|-
+| 0xD8E0806A
+| You have developer UNITINFO enabled and are trying to install a retail game.
+:To fix, go into the file <code>sd:/luma/config.ini</code> and set the variable <code>use_dev_unitinfo</code> to 0.
 |-
 | 0xD860446?
 | You are attempting to use more processing power than the console currently has available.
 :To fix, ensure you are not using a mod that is designed for an emulator rather than native hardware. If you are using such a mod, either toggle off any "Extra RAM" setting or use a different mod.
-|-
-| 0xD8E0806A
-| You have developer UNITINFO enabled and are trying to install a retail game.
-:To fix, go into the file <code>sd:/luma/config.ini</code> and set the variable <code>use_dev_unitinfo</code> to 0.
 |-
 | 0xD900458?
 | The app you tried to open, its savedata, or an update file for it is corrupted.
 :To fix, if it is a [[3DS:Dump titles and game cartridges#Dumping a Game Cartridge|cartridge dump]], redump it. If it is an eShop game, click the Repair button at the bottom of its eShop page or delete and reinstall it. If it is a cartridge, clean the cartridge and the 3DS cartridge reader with isopropyl alcohol.
-|-
-| {{anchor|0xF9605002}}0xF9605002
-| If attempting to use any camera features, your camera hardware is damaged or dead.
 |}
 [[Category:Unbricking]]