SD Clean/Linux: Difference between revisions

Revision as of 20:40, 26 March 2023

This is an add-on section for completely recreating an SD card's filesystem using fdisk and mkfs. This should only be done if formatting does not fix your issue or is not possible for some reason.

This page is for Linux users only. If you are not on Linux, see the Windowsand/or Mac pages instead.

Instructions

Before beginning these steps, copy all of your SD card's contents to a folder on your computer.

The commands in this guide are case-sensitive. Enter them exactly as written, or there may be unintended consequences.

Make sure your SD card is not inserted

Launch the linux terminal and type wqatch lsblk.

Observe the output. It should match something like this:

NAME        MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
mmcblk0     179:0    0   3,8G  0 disk
└─mmcblk0p1 179:1    0   3,7G  0 part /run/media/user/FFFF-FFFF

Take note of the device name. In our example above, it was mmcblk0p1
- If RO is set to 1, make sure the lock switch is not slid down
Hit CTRL + C to exit the menu
For each partition of the disk, type umount /dev/sdXi.
- Replace i with the partition number you are unmounting.
Type fdisk <disk label>.
Type o, then type n and press ENTER on all prompts.
- If it asks whether to remove a VFAT signature, choose to remove it.
Once you are back at fdisk's main menu, type t and then type 0c.
Type a and then p. Observe the output and make sure the device is now formatted correctly.
If there are no issues, type w. This will save changes and exit the fdisk prompt.
Type sudo mkfs.vfat /dev/sdX1 -s 64 to reformat the new partition.
- If the SD card is over 32GB in size, change 64 to 128.
Type sudo eject (device name), then remove and reinsert the SD card.
Copy your data back onto the SD card.

@@ Line 1: / Line 1: @@
+{{Page WIP|notes=Add GUI options for those who want to use GParted or GNOME Disks instead of the command line.}}
 This is an add-on section for completely recreating an SD card's filesystem using fdisk and mkfs. This should only be done if formatting does not fix your issue or is not possible for some reason.
-This page is for Linux users only. If you are not on Linux, see the [[SD Clean/Windows|Windows]] and/or [[SD Clean/Mac|Mac]] pages instead.
+This page is for Linux users only. If you are not on Linux, see the [[SD Clean/Windows|Windows]]and/or [[SD Clean/Mac|Mac]] pages instead.
 == Instructions ==
 {{warning|Before beginning these steps, copy all of your SD card's contents to a folder on your computer.}}
 {{warning|The commands in this guide are case-sensitive. Enter them exactly as written, or there may be unintended consequences.}}
 # Make sure your SD card is '''not''' inserted
-# Open a terminal window and type <code>watch lsblk</code>
+# Launch the linux terminal and type <code>wqatch lsblk</code>.
-# Insert the SD card and watch for a new device appearing in lsblk
+## Observe the output. It should match something like this: {{#tag:syntaxhighlight|
-# Observe the output for the new device. It should match something like this: {{#tag:syntaxhighlight|
+NAME        MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
-NAME        MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
+mmcblk0     179:0    0   3,8G  0 disk
-mmcblk0     179:0    0 29.7G  0 disk
+└─mmcblk0p1 179:1    0   3,7G  0 part /run/media/user/FFFF-FFFF
-└─mmcblk0p1 179:1    0 29.5G  0 part /run/media/user/FFFF-FFFF
 |lang=text}}
-# Take note of the name of the device that now appears. In our example above, it was <code>mmcblk0</code>, but it could show up as <code>sda</code> or <code>sdb</code>, if you use a USB adapter
+# Take note of the device name. In our example above, it was <code>mmcblk0p1</code>
 #* If <code>RO</code> is set to 1, make sure the lock switch is not slid down
 # Hit CTRL + C to exit the menu
-# Type <code>sudo umount /dev/<device name>*</code> (do not replace the <code>*</code>)
+# For each partition of the disk, type <code>umount /dev/sdXi</code>.
-# Type <code>sudo fdisk /dev/<device name></code>.
+#* Replace <code>i</code> with the partition number you are unmounting.
-# Enter <code>o</code>, then enter <code>n</code> and go through all the resulting prompts without changing settings.
+# Type <code>fdisk <disk label></code>.
+# Type <code>o</code>, then type <code>n</code> and press ENTER on all prompts.
 #* If it asks whether to remove a VFAT signature, choose to remove it.
-# Once you are back at fdisk's main menu, enter <code>t</code> and then enter <code>0c</code>
+# Once you are back at fdisk's main menu, type <code>t</code> and then type <code>0c</code>.
-# Enter <code>a</code> and then <code>p</code> - observe the output, and make sure the device is now formatted correctly: : {{#tag:syntaxhighlight|
+# Type <code>a</code> and then <code>p</code>. Observe the output and make sure the device is now formatted correctly.
-Disk /dev/mmcblk0: 29.72 GiB, 31914983424 bytes, 62333952 sectors
+# If there are no issues, type <code>w</code>. This will save changes and exit the fdisk prompt.
-Units: sectors of 1 * 512 = 512 bytes
+# Type <code>sudo mkfs.vfat /dev/sdX1 -s 64</code> to reformat the new partition.
-Sector size (logical/physical): 512 bytes / 512 bytes
+#* If the SD card is over 32GB in size, change </code>64</code> to <code>128</code>.
-I/O size (minimum/optimal): 512 bytes / 512 bytes
+# Type <code>sudo eject (device name)</code>, then remove and reinsert the SD card.
-Disklabel type: dos
-Disk identifier: 0x########
-Device                Boot  Start      End  Sectors  Size Id Type
-/dev/<partition name>        8192 62333951 62325760 29.7G  c W95 FAT32 (LBA)
-|lang=text}}
-# If there are no issues, enter <code>w</code> - this will save changes and exit the fdisk prompt.
-# Type <code>sudo mkfs.vfat /dev/<partition name> -s 64</code> to reformat the new partition.
-#* If the SD card is over 32GB in size, change </code>64</code> to <code>128</code>
-# Type <code>sudo eject /dev/<device name></code>, then remove and reinsert the SD card.
 # Copy your data back onto the SD card.
-[[Category:General guides]]