Wii U:Alternate Exploits/Bluubomb

Installing PayloadLoader with Bluubomb

You should really only follow this if you were redirected here due to unable to use the browser for some reason.

Notes:

• BluuBomb requires Linux. It's easiest in an Ubuntu VM.
• You will need a compatible Bluetooth adapter so keep that in mind (In my experience Realtek adapters do not work, although they should be supported.)

What you need

1. BluuBomb
2. Aroma
   • Scroll down to the Download section.
   • Read through the steps and click on the checkboxes.
   • Click on Download Payloads and Download Base Aroma.

SD Prep

1. Copy the contents of the Aroma .zip files to the root of the SD Card.
2. Copy the root.rpx file from the sd:/wiiu/environments folder to root of the SD Card, and rename to launch.rpx.
   • • Also create a file called autoboot.cfg in sd:/wiiu/environments/aroma, insert wiiu_menu into it, and save the file.
3. Insert the SD Card into the Wii U.

Setting up and using BluuBomb

Follow this to set up BluuBomb.

Installing the PayloadLoader into Health and Safety

1. Launch the PayloadLoader Installer from the Wii U Menu.
2. Press A to select `Check`.
3. Press A on `Install / Update`.
4. You’ll be asked if you are sure you want to install the PayloadLoader. Use the D-Pad to select `Install` and press A.
5. Press A to shut down the console.

NAND Backup

A NAND Backup cannot be done without a GamePad. Please get a GamePad ASAP to perform a NAND Backup..

1. Load the the Health and Safety application while holding B.
2. Navigate to nanddumper and press A.
3. Make the settings look like this and then press A. MLC is optional as it is the biggest part of the NAND Backup (8gb or 32gb depending on your model).
   • SLC: Yes
   • SLCCMPT: Yes
   • MLC: Optional
   • OTP: Yes
   • SEEPROM: Yes
4. Wait for it to finish. It may take a few hours if you opted to dump MLC.
5. To make sure you don’t lose the files, copy the slc.bin, slccmpt.bin, seeprom.bin, otp.bin and if you chose to go with a full backup, every mlc.bin.part file to your computer.
6. Delete the files to free up space on the SD Card.

Autobooting PayloadLoader

1. Start the console to boot into the Wii U Menu, launch the Health and Safety Information app.
2. Navigate the list using the D-Pad and navigate to the aroma environment, press A to launch it.
3. Select Wii U Menu.
4. Back at the Wii U Menu, launch the PayloadLoader Installer.
5. Press A to select Check.
6. Select Boot Options.
7. You will be asked if you want to switch the boot title. Press A to select Switch to PayloadLoader.
8. When the process finished, press A to shutdown the console.
9. The PayloadLoader will now be launched automatically on every boot.

Finalizing Setup

It is now a good idea to finalize your PayloadLoader installation. You can find a guide on this here.