User:Botman/Projects/Finalizing Setup (Manual)

User page

Required Reading

This is an older version of finalizing setup, for when all other options have been exhausted and the script doesnt work.

What You Need

  • The latest release of FBI (Both the 3dsx and the cia file)
  • The latest release of Anemone3DS (the cia file)
  • The latest release of FTPD (direct download)
  • The 3.7.4 release of Checkpoint (Direct download)
  • The latest release of HB_Launcher_Loader (direct download)
  • The latest release of Universal-Updater (direct download)
  • The latest release of Godmode9 (direct download)

Instructions

Section I - Prep Work

  1. Power off your device
  2. Insert your SD card into your computer
  3. Create a folder named3dson your sd card.
    • You may already have this from a earlier section in the guide.
  4. Place FBI.3dsx into the 3ds folder on the sd card.
  5. Create a folder named cias on the root of the sd card.
  6. Place FBI.cia, Universal-Updater.cia, Anemone3DS.cia, ftpd.cia, hblauncher_loader.cia and Checkpoint.cia in the cias folder.
  7. Create a folder named payloads in the luma folder on your sd card.
  8. Copy godmode9.firm from the godmode9 zip file to the luma/payloads folder.
  9. Copy the gm9 folder from the godmode9 zip file to the root of your sd card.

Section II - CFW Check

  1. Power off your console
  2. Hold the (Select) button
  3. Power on your console while still holding the (Select) button
    • If the check was successful, your console should have booted into the Luma3DS configuration menu
  4. Press (Start) to save and reboot
  5. Power off your console
  If you do NOT boot into the Luma3DS configuration menu, custom firmware was not installed on your console. Join Nintendo Homebrew on Discord and ask, in English, for help

Section III - Updating the System

  1. Update your console by going to System Settings, then “Other Settings”, then going all the way to the right and using “System Update”
    • Updates while using B9S + Luma (what you have) are safe
    • The updater may display a message saying “Your system is up to date” instead of updating. This is normal if you are already up to date; continue to the next section
    • If this gives you an error, set both your DNS settings and Proxy settings to “Auto”
    • If this still gives you an error, follow this troubleshooting guide


Section IV - RTC and DSP setup

  1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
    • If one of these buttons is broken, download [config.ini] and put it in your luma folder, replacing the existing one. This will change the Rosalina menu key combination to (X) + (Y)
  2. Select “Miscellaneous options”
  3. Select “Dump DSP firmware”
  4. Press (B) to continue
  5. Select “Nullify user time offset”
  6. Press (B) to continue
  7. Press (B) to return to the Rosalina main menu
  8. Press (B) to exit the Rosalina menu
Retrieved from "https://wiki.hacks.guide/w/index.php?title=User:Botman/Projects/Finalizing_Setup_(Manual)&oldid=4720"