Tags: Mobile edit Mobile web edit |
|
| Line 6: |
Line 6: |
| {{warning|Before beginning these steps, copy all of your SD card's contents to a folder on your computer.}} | | {{warning|Before beginning these steps, copy all of your SD card's contents to a folder on your computer.}} |
|
| |
|
| {{warning|The commands in this guide are case-sensitive. Enter them exactly as written, or there may be unintended consequences.}} | | {{warning|The commands in this guide are case-sensitive. Enter them exactly as written, or there may be unintended consequences.}}<tabber> |
| | | |-|fdisk= |
| | # Make sure your SD card is '''not''' inserted |
| | # Open a terminal window and type <code>watch lsblk</code> |
| | # Insert the SD card and watch for a new device appearing in lsblk |
| | # Observe the output for the new device. It should match something like this: {{#tag:syntaxhighlight| |
| | NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT |
| | mmcblk0 179:0 0 3,8G 0 disk |
| | └─mmcblk0p1 179:1 0 3,7G 0 part /run/media/user/FFFF-FFFF |
| | |lang=text}} |
| | # Take note of the name of the device that now appears. In our example above, it was <code>mmcblk0p1</code>, but it could show up as <code>sda</code> or <code>sdb</code>, if you use a USB adapter |
| | #* If <code>RO</code> is set to 1, make sure the lock switch is not slid down |
| | # Hit CTRL + C to exit the menu |
| | # Install the <code>fdisk</code> and <code>dosfstools</code> packages using your package manager of choice |
| | # Type <code>sudo fdisk /dev/<device name></code> |
| | # Enter <code>t</code> and then enter <code>0c</code> |
| | # Enter <code>a</code> and then <code>p</code> - observe the output, and make sure the device is now formatted correctly |
| | # If there are no issues, enter <code>w</code> - this will save changes and exit the fdisk prompt |
| | # Type <code>sudo mkfs.vfat /dev/<device name>1 -s 64</code> to reformat the new partition |
| | #* If the SD card is over 32GB in size, change </code>64</code> to <code>128</code> |
| | # Type <code>sudo eject /dev/<device name></code>, then remove and reinsert the SD card |
| | # Copy your data back onto the SD card |
| | |-|cfdisk= |
| | # Make sure your SD card is '''not''' inserted |
| | # Open a terminal window and type <code>watch lsblk</code> |
| | # Insert the SD card and watch for a new device appearing in lsblk |
| | # Observe the output for the new device. It should match something like this: {{#tag:syntaxhighlight| |
| | NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT |
| | mmcblk0 179:0 0 3,8G 0 disk |
| | └─mmcblk0p1 179:1 0 3,7G 0 part /run/media/user/FFFF-FFFF |
| | |lang=text}} |
| | # Take note of the name of the device that now appears. In our example above, it was <code>mmcblk0p1</code>, but it could show up as <code>sda</code> or <code>sdb</code>, if you use a USB adapter |
| | #* If <code>RO</code> is set to 1, make sure the lock switch is not slid down |
| | # Hit CTRL + C to exit the menu |
| | # Install the <code>cfdisk</code> and <code>dosfstools</code> packages using your package manager of choice |
| | # Type <code>sudo cfdisk /dev/<device name></code> |
| | # Choose the <code>Delete</code> option and delete any existing partitions |
| | # Choose the <code>New</code> option, keep partition size at the recommended size, and choose primary partition type |
| | # Choose the <code>Type</code> option, scroll up until you see <code>b W95 FAT32</code> and select it |
| | # Finally, choose the <code>Write</code> option. '''This will overwrite any existing data. You have been warned.''' |
| | # Choose the <code>Quit</code> option |
| | # Type <code>sudo eject /dev/<device name></code>, then remove and reinsert the SD card |
| | # Copy your data back onto the SD card |
| | |-|parted= |
| | # Make sure your SD card is '''not''' inserted |
| | # Open a terminal window and type <code>watch lsblk</code> |
| | # Insert the SD card and watch for a new device appearing in lsblk |
| | # Observe the output for the new device. It should match something like this: {{#tag:syntaxhighlight| |
| | NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT |
| | mmcblk0 179:0 0 3,8G 0 disk |
| | └─mmcblk0p1 179:1 0 3,7G 0 part /run/media/user/FFFF-FFFF |
| | |lang=text}} |
| | # Take note of the name of the device that now appears. In our example above, it was <code>mmcblk0p1</code>, but it could show up as <code>sda</code> or <code>sdb</code>, if you use a USB adapter |
| | #* If <code>RO</code> is set to 1, make sure the lock switch is not slid down |
| | # Hit CTRL + C to exit the menu |
| | # Install the <code>parted</code> and <code>dosfstools</code> packages using your package manager of choice |
| | # Type <code>sudo parted /dev/<device name> mklabel msdos</code> |
| | # Type <code>sudo parted -a opt /dev/<device name> mkpart primary fat32 0% 100% |
| | # Type <code>sudo eject /dev/<device name></code>, then remove and reinsert the SD card. |
| | # Copy your data back onto the SD card. |
| | </tabber> |
| # Make sure your SD card is '''not''' inserted | | # Make sure your SD card is '''not''' inserted |
| # Open a terminal window and type <code>watch lsblk</code>. | | # Open a terminal window and type <code>watch lsblk</code>. |
