- Make sure your SD card is not inserted
- Open a terminal window and type
watch lsblk
- Insert the SD card and watch for a new device appearing in lsblk
- Observe the output for the new device. It should match something like this:
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT mmcblk0 179:0 0 3,8G 0 disk └─mmcblk0p1 179:1 0 3,7G 0 part /run/media/user/FFFF-FFFF
- Take note of the name of the device that now appears. In our example above, it was
mmcblk0p1
, but it could show up assda
orsdb
, if you use a USB adapter- If
RO
is set to 1, make sure the lock switch is not slid down
- If
- Hit CTRL + C to exit the menu
- Install the
fdisk
anddosfstools
packages using your package manager of choice - Type
sudo fdisk /dev/<device name>
- Enter
t
and then enter0c
- Enter
a
and thenp
- observe the output, and make sure the device is now formatted correctly - If there are no issues, enter
w
- this will save changes and exit the fdisk prompt - Type
sudo mkfs.vfat /dev/<device name>1 -s 64
to reformat the new partition- If the SD card is over 32GB in size, change
64
to128
- If the SD card is over 32GB in size, change
- Type
sudo eject /dev/<device name>
, then remove and reinsert the SD card - Copy your data back onto the SD card
StarlitSkies (talk | contribs) (add fdisk instructions to fix issue with partition typing) |
(Undo MSET9 Fresh mention - Linux) Tag: Undo |
||
(6 intermediate revisions by 3 users not shown) | |||
Line 7: | Line 7: | ||
{{warning|The commands in this guide are case-sensitive. Enter them exactly as written, or there may be unintended consequences.}} | {{warning|The commands in this guide are case-sensitive. Enter them exactly as written, or there may be unintended consequences.}} | ||
<tabber> | |||
|-|fdisk= | |||
<span> | |||
# Make sure your SD card is '''not''' inserted | # Make sure your SD card is '''not''' inserted | ||
# Open a terminal window and type <code>watch lsblk</code> | |||
# Open a terminal window and type <code>watch lsblk</code> | # Insert the SD card and watch for a new device appearing in lsblk | ||
# Insert the SD card and watch for a new device appearing in lsblk | |||
# Observe the output for the new device. It should match something like this: {{#tag:syntaxhighlight| | # Observe the output for the new device. It should match something like this: {{#tag:syntaxhighlight| | ||
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT | NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT | ||
Line 17: | Line 19: | ||
└─mmcblk0p1 179:1 0 3,7G 0 part /run/media/user/FFFF-FFFF | └─mmcblk0p1 179:1 0 3,7G 0 part /run/media/user/FFFF-FFFF | ||
|lang=text}} | |lang=text}} | ||
# Take note of the name of the device that now appears. In our example above, it was <code>mmcblk0p1</code> | # Take note of the name of the device that now appears. In our example above, it was <code>mmcblk0p1</code>, but it could show up as <code>sda</code> or <code>sdb</code>, if you use a USB adapter | ||
#* If <code>RO</code> is set to 1, make sure the lock switch is not slid down | #* If <code>RO</code> is set to 1, make sure the lock switch is not slid down | ||
# Hit CTRL + C to exit the menu | # Hit CTRL + C to exit the menu | ||
# Install the <code>fdisk</code> and <code>dosfstools</code> packages using your package manager of choice | |||
# Type <code>sudo fdisk /dev/<device name></code> | # Type <code>sudo fdisk /dev/<device name></code> | ||
# Enter <code>t</code> and then enter <code>0c</code> | # Enter <code>t</code> and then enter <code>0c</code> | ||
# Enter <code>a</code> and then <code>p</code> - observe the output, and make sure the device is now formatted correctly | # Enter <code>a</code> and then <code>p</code> - observe the output, and make sure the device is now formatted correctly | ||
# If there are no issues, enter <code>w</code> - this will save changes and exit the fdisk prompt | # If there are no issues, enter <code>w</code> - this will save changes and exit the fdisk prompt | ||
# Type <code>sudo mkfs.vfat /dev/<device name> -s 64</code> to reformat the new partition | # Type <code>sudo mkfs.vfat /dev/<device name>1 -s 64</code> to reformat the new partition | ||
#* If the SD card is over 32GB in size, change < | #* If the SD card is over 32GB in size, change <code>64</code> to <code>128</code> | ||
# Type <code>sudo eject /dev/<device name></code>, then remove and reinsert the SD card | |||
# Copy your data back onto the SD card | |||
</span> | |||
|-|cfdisk= | |||
<span> | |||
# Make sure your SD card is '''not''' inserted | |||
# Open a terminal window and type <code>watch lsblk</code> | |||
# Insert the SD card and watch for a new device appearing in lsblk | |||
# Observe the output for the new device. It should match something like this: {{#tag:syntaxhighlight| | |||
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT | |||
mmcblk0 179:0 0 3,8G 0 disk | |||
└─mmcblk0p1 179:1 0 3,7G 0 part /run/media/user/FFFF-FFFF | |||
|lang=text}} | |||
# Take note of the name of the device that now appears. In our example above, it was <code>mmcblk0p1</code>, but it could show up as <code>sda</code> or <code>sdb</code>, if you use a USB adapter | |||
#* If <code>RO</code> is set to 1, make sure the lock switch is not slid down | |||
# Hit CTRL + C to exit the menu | |||
# Install the <code>cfdisk</code> and <code>dosfstools</code> packages using your package manager of choice | |||
# Type <code>sudo cfdisk /dev/<device name></code> | |||
# Choose the <code>Delete</code> option and delete any existing partitions | |||
# Choose the <code>New</code> option, keep partition size at the recommended size, and choose primary partition type | |||
# Choose the <code>Type</code> option, scroll up until you see <code>b W95 FAT32</code> and select it | |||
# Finally, choose the <code>Write</code> option. | |||
# Choose the <code>Quit</code> option | |||
# Type <code>sudo eject /dev/<device name></code>, then remove and reinsert the SD card | |||
# Copy your data back onto the SD card | |||
</span> | |||
|-|parted= | |||
<span> | |||
# Make sure your SD card is '''not''' inserted | |||
# Open a terminal window and type <code>watch lsblk</code> | |||
# Insert the SD card and watch for a new device appearing in lsblk | |||
# Observe the output for the new device. It should match something like this: {{#tag:syntaxhighlight| | |||
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT | |||
mmcblk0 179:0 0 3,8G 0 disk | |||
└─mmcblk0p1 179:1 0 3,7G 0 part /run/media/user/FFFF-FFFF | |||
|lang=text}} | |||
# Take note of the name of the device that now appears. In our example above, it was <code>mmcblk0p1</code>, but it could show up as <code>sda</code> or <code>sdb</code>, if you use a USB adapter | |||
#* If <code>RO</code> is set to 1, make sure the lock switch is not slid down | |||
# Hit CTRL + C to exit the menu | |||
# Install the <code>parted</code> and <code>dosfstools</code> packages using your package manager of choice | |||
# Type <code>sudo parted /dev/<device name> mklabel msdos</code> | |||
# Type <code>sudo parted -a opt /dev/<device name> mkpart primary fat32 0% 100%</code> | |||
# Type <code>sudo eject /dev/<device name></code>, then remove and reinsert the SD card. | # Type <code>sudo eject /dev/<device name></code>, then remove and reinsert the SD card. | ||
# Copy your data back onto the SD card. | # Copy your data back onto the SD card. | ||
</span> | |||
</tabber> | |||
{{hg imported|Guide_3DS}} | {{hg imported|Guide_3DS}} | ||
[[Category:General guides]] | [[Category:General guides]] |
Latest revision as of 18:16, 11 April 2024
This is an add-on section for formatting an SD card to FAT32.
This page is for Linux users only. If you are not on Linux, check out the Windows or Mac pages.
Instructions
Before beginning these steps, copy all of your SD card's contents to a folder on your computer. |
The commands in this guide are case-sensitive. Enter them exactly as written, or there may be unintended consequences. |
- Make sure your SD card is not inserted
- Open a terminal window and type
watch lsblk
- Insert the SD card and watch for a new device appearing in lsblk
- Observe the output for the new device. It should match something like this:
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT mmcblk0 179:0 0 3,8G 0 disk └─mmcblk0p1 179:1 0 3,7G 0 part /run/media/user/FFFF-FFFF
- Take note of the name of the device that now appears. In our example above, it was
mmcblk0p1
, but it could show up assda
orsdb
, if you use a USB adapter- If
RO
is set to 1, make sure the lock switch is not slid down
- If
- Hit CTRL + C to exit the menu
- Install the
cfdisk
anddosfstools
packages using your package manager of choice - Type
sudo cfdisk /dev/<device name>
- Choose the
Delete
option and delete any existing partitions - Choose the
New
option, keep partition size at the recommended size, and choose primary partition type - Choose the
Type
option, scroll up until you seeb W95 FAT32
and select it - Finally, choose the
Write
option. - Choose the
Quit
option - Type
sudo eject /dev/<device name>
, then remove and reinsert the SD card - Copy your data back onto the SD card
- Make sure your SD card is not inserted
- Open a terminal window and type
watch lsblk
- Insert the SD card and watch for a new device appearing in lsblk
- Observe the output for the new device. It should match something like this:
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT mmcblk0 179:0 0 3,8G 0 disk └─mmcblk0p1 179:1 0 3,7G 0 part /run/media/user/FFFF-FFFF
- Take note of the name of the device that now appears. In our example above, it was
mmcblk0p1
, but it could show up assda
orsdb
, if you use a USB adapter- If
RO
is set to 1, make sure the lock switch is not slid down
- If
- Hit CTRL + C to exit the menu
- Install the
parted
anddosfstools
packages using your package manager of choice - Type
sudo parted /dev/<device name> mklabel msdos
- Type
sudo parted -a opt /dev/<device name> mkpart primary fat32 0% 100%
- Type
sudo eject /dev/<device name>
, then remove and reinsert the SD card. - Copy your data back onto the SD card.