3DS:cleaninty

cleaninty
Developer(s)	luigoalma
Platform	Microsoft Windows, macOS, Linux
Version	0.1.3 (March 18, 2023; 20 months ago)
Links
GitHub	luigoalma/cleaninty
Download
	GitHub release;
	v; t; e;

cleaninty is a PC tool used to communicate with Nintendo's SOAP servers. For a 3DS, these servers deal with managing eShop accounts, downloading eShop titles, and system transfers. It is also the tool used for what is informally known as a "SOAP transfer".

Overview

There are two pieces of data a 3DS that give it a unique ID to Nintendo's eShop servers: its serial number and its otp.bin. If these are copied out of the console and used somewhere else, they can be used to imitate the console - meaning Nintendo's servers can act on commands without the console doing anything on its end.
However, the files cannot communicate on their own, and a connection to Nintendo's servers that acts identically to a console is still needed. This part is where cleaninty comes in.

The reason this allows for changing eShop regions easily, and at infinite range, are as follows:

Ease of Use: Tickets for both system software & purchased apps are stored on Nintendo's servers, and some of these tickets are region-locked - meaning their presence blocks the console from registering to any other eShop region. (The most common of these tickets are from preinstalled games and the Mii Plaza 3.x update.) The only way to remove these tickets is to transfer them to another console, and cleaninty is able to move only the tickets with a single command.
Infinite Range: System transfers are effectively divided into two parts: the content transfer (done entirely on consoles), and the NNID/title transfer (done entirely on servers).
On an actual console, these two must be done at the same time - but if cleaninty sends the commands for a server transfer, it doesn't start a content transfer and thus the consoles do not have to be next to each other. (Technically, this also means a Manual Movable Moveover is the exact opposite of a SOAP transfer.)

Features

When the required constants have been supplied through SetupConstants and you have the unique data (otp.bin and either SecureInfo.bin or the serial number) of a console, cleaninty can act as that console and do the following:

GenJson: Compiles the console's data into a single JSON file. This JSON is required for all other commands except RecoverIVS.
CheckReg: Obtains the console's eShop status, eShop region, and any titles attached to its eShop account, then updates the JSON file if any differences in the data are found.
SysTransfer: Moves the eShop titles of the source console to the target console. This is the only part of a SOAP transfer if the console has region-locked tickets, as it will do an EShopDelete as part of the transfer.
- A successful use of this command triggers a 7-day cooldown on system transfers for both consoles, the same as a full system transfer.
NNIDTransfer: (Still experimental. Use with caution.) Moves only the NNIDs of the source console to the target console. This is not affected by system transfer cooldowns and does not trigger one.
LastTransfer: Provides the date&time of the given console's last system transfer, the number of transfers it has ever done, and the time at which the current transfer cooldown will expire if there is one active.
GetIVS: Downloads the console's movable.sed from the SOAP servers, if the servers have a stored copy.
SetIVS: Uploads the chosen JSON's stored movable.sed to the SOAP servers. This will overwrite the current stored movable.
RecoverIVS: Tries to recover a console's movable.sed from only its raw otp.bin and eShop region data.
EShopDelete: Deletes the target console's eShop account. This is the secondary part of a SOAP transfer, as the console will then automatically register an account in the correct region when it next accesses the eShop.
EShopRegionChange: Attempts to delete and then recreate the target console's eShop account for the entered region. This is the main part of a SOAP transfer if the console has no region-locked tickets, but an EShopDelete should still be done afterward.
ETickets/ETicketDownload/ETikTitleDownload: Lists all owned eShop tickets / downloads all tickets / downloads the titles attached to all tickets, respectively, from the given console's eShop account.

Installation

Instructions for installation & setup are on the GitHub page, but the installation instructions may need to be interpreted for your OS.

Regardless of your OS, you will need a 3DS with both custom firmware and GodMode9 installed to dump the vast majority of the files required to do SetupConstants using ExtractSystemElements.gm9. A guide to legally deriving the only constant not dumped via this method, the AES Constant "C", can be found on this page.

The AES Constant, along with all other constants used by cleaninty, are copyrighted data. Obtaining them from your own console(s) is fine, but do not share the constants with anyone else.

Windows

Don't bother trying to install cleaninty on Windows directly. Windows has OpenSSL disabled in its curl.exe, but cleaninty requires OpenSSL to function. Working around this issue manually is obnoxious and not worth the time spent.

Instead, there are two options:

Install a Linux distro through WSL and then install cleaninty inside the WSL instance using the macOS/Linux instructions. (This is the simpler path, and WSL is useful for many other things. If you choose this instead of msys2, it is recommended that you also install the Windows Terminal.)
Install msys2 and then install cleaninty inside the msys2 instance using the below instructions.

To install cleaninty inside msys2, open the terminal mingw64.exe that is inside the msys2 installation folder, then run the following two commands one at a time:

pacman -Syu mingw-w64-x86_64-python mingw-w64-x86_64-python-defusedxml mingw-w64-x86_64-python-cryptography mingw-w64-x86_64-python-pycurl
python -m pip install cleaninty

Once this is completed, from here on out you will need to open the msys2 mingw64.exe terminal to use cleaninty.

Be aware that when using cleaninty through msys2, the place it will look in to find boot9.bin, SSLCertificates, and ctr_constants.json is a folder named 3ds inside your msys2 home folder.

macOS and Linux

First, ensure you have Python 3.7 or newer. You can check if your Python version is new enough by opening a terminal and running the command python3 --version. If you do not, install a compatible version from either your package manager or the Python website.

Then, either install cleaninty directly from pip or clone its repo via the command git clone https://github.com/luigoalma/cleaninty.git and then run the setup.py script.

Usage

Make sure the files for all consoles you compile into a json are accurate before using them in cleaninty, or else the commands may affect a different console than they "should be".

The easiest way to do this is by checking the serial sticker(s) on the console against the copy of the serial in SecureInfo_A.

If none of the stickers agree with the SecureInfo, also check against the copy in inspect.log and make sure its listed MAC Address matches the one in System Settings -> Internet Settings -> Other Information -> Confirm MAC Address.

There is no graphical interface for cleaninty. All commands are ran through the command line.

Manual command line

The commands are the same on all operating systems. Run cleaninty ctr (command) --help for information on an individual command's syntax.

As an example, the minimum list of commands needed to set up two consoles' data and perform a SOAP transfer between them would be as follows:

cleaninty ctr GenJson --otp otp.bin --secureinfo secinfo.bin --out soap_donor.json
cleaninty ctr GenJson --otp otp1.bin --secureinfo secinfo1.bin --out soap_target.json
cleaninty ctr CheckReg -C soap_donor.json
cleaninty ctr CheckReg -C soap_target.json
- The CheckReg commands are not necessary if you are already certain the donor and target have the same region.
cleaninty ctr EShopRegionChange -C soap_target.json -r (eShop region) -c (eShop country - not required if region is JPN/KOR/CHN)
- You can use any region/country for this command other than the one listed in the soap_target.json's CheckReg.
Depending on whether the EShopRegionChange was successful or not, only do one of the following commands.

cleaninty EShopDelete -C soap_target.json

cleaninty ctr SysTransfer -s soap_target.json -t soap_donor.json

Autosoap script

If you are inexperienced with the command line or just don't want to type the commands manually every time, there is a SOAP bash script made by StarlitSkies that heavily simplifies the process.

Read the instructions on its page for setup and usage.