3DS:Fastboot3DS to boot9strap

What you Need

• The latest release of SafeB9SInstaller
• The latest release of boot9strap
• The latest release of Luma3DS

Instructions

Section I - Prep Work

1. Power off your device
2. Insert your SD card into your computer
3. Copy SafeB9SInstaller.firm from the SafeB9SInstaller .zip to the root of your SD card
4. Create a folder named boot9strap on your SD card
5. Copy boot9strap.firm and boot9strap.firm.sha from the boot9strap .zip to the /boot9strap/ folder on your SD card
6. Copy boot.firm and boot.3dsx from the Luma3DS .zip to the root of your SD card
7. Safely eject your SD card from your computer
8. Reinsert your SD card into your device

Section II - Launching SafeB9SInstaller

1. Press Home, and while holding Home, power on your device
2. Select [+] Boot from file...
3. Select SafeB9SInstaller.firm
4. Your device will have booted into SafeB9SInstaller

Section III - Installing boot9strap

1. When prompted, input the key combo given on the top screen to install boot9strap
2. Once it is complete, press (A) to reboot your device
3. Your device should have rebooted into the Luma3DS configuration menu
   • Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
   • For the purpose of this guide, these settings will be left on default settings
   • If your device shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
4. Press (Start) to save and reboot
   • If you get an error, just continue to the next page

At this point, your console will boot to Luma3DS by default. Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. On the next page, you will install useful homebrew applications to complete your setup.

---

Continue to Finalizing Setup