3DS:Bannerbomb3/Preparing menuhax67

Required Reading

Bannerbomb3 is an exploit for the DSiWare Management Menu, compatible with the latest System version for all regions excluding the iQue 3DS, it doesn't have that menu. The main developer is zoogie.

It's the main primary exploit used on the main guide, unSAFE_MODE and BB3(Bannerbomb3)+Fredtool both use it. It can be used to prepare the secondary exploits unSAFE_MODE(you can find this on the main guide) or menuhax67, both made by the legend zoogie. This page covers installing menuhax67 to access the Homebrew Launcher since accessing the Homebrew Launcher from Bannerbomb3 directly not possible. Note that with a crashing DSiWare Management Menu, this method won't work.

The instructions described here only work with EUR/USA/JPN/KOR, if you want to use Taiwan for some odd reason, no you don't want that, use the normal guide instead to install custom firmware.

What you need

• The latest version of Luma3DS (the Luma3DS .zip file)
• The latest version of Bannerbomb3 (the Release .zip file)
• Your movable.sed file from completing Seedminer
• The latest release of menuhax67 (the menuhax67 .zip file)

Instructions

Section I - Prep Work

1. Insert the SD card of your target 3DS in your computer
2. Copy boot.firm and boot.3dsx from the Luma3DS .zip to the root of your SD card
3. Copy the Launcher.dat for your region/version from the Release .zip to the root of your SD card
4. Copy the bb3.bin from the Release .zip to the root of your SD card

Section II - Bannerbomb3 Prep

Section II-I - F00D43D5.bin generation

1. Open the DSIHaxInjector website on your computer
2. Under the “Username” field, enter any alphanumeric name (no spaces or special characters)
3. Under the “MovableSed” field, upload your movable.sedusing the “Browse…” option
4. Click “Build”
5. Wait a few seconds, then click “Last build (#number) x sec ago”
6. Click the “output_(name).zip” link
   • This should download the zip file

Section II-II - F00D43D5.bin placement

1. Navigate to Nintendo 3DS -> <ID0> -> <ID1> on your SD card
   • The <ID0> will be the same one that you used in Seedminer
   • The <ID1> is a 32 character long folder inside of the <ID0>
2. Create a folder named Nintendo DSiWare inside of the <ID1>
   • If you already had the folder and there are any existing DSiWare backup files (<8-character-id>.bin) inside, copy them to your PC and remove them from your SD card
3. Open the output_(name) .zip file and enter the Usa_Europe_Japan_Korea folder
4. Copy the F00D43D5.bin file to the Nintendo DSiWare folder

Section III - Bannerbomb3

1. Reinsert your SD card into your device
2. Power on your device
3. Launch System Settings on your device
4. Navigate to Data Management -> DSiWare -> SD Card
5. Select Install *HAX