Formater une carte SD/Mac

Ceci est une section complémentaire sur comment formater une carte SD en FAT32.

Si la carte SD est déjà reconnue par la 3DS, ce guide n'est pas nécessaire.

Cette page est seulement pour les utilisateurs de Mac. Si vous n'utilisez pas un Mac, jetez un œil aux pages Windows ou Linux.

Instructions

OS X El Capitan (10.11) et ultérieur<span lang

1. Insérez votre carte SD dans votre ordinateur
2. Si la carte SD contient des fichiers et des dossiers, copiez-les tous vers un dossier sur votre ordinateur
3. Run the Disk Utility app
4. In the top-left "View" menu, choose "Show All Devices"
5. Select your SD card in the left panel
   

   Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive!

6. Click "Erase" at the top
7. Enter anything for "Name"
8. Ensure that "Format" is set to "MS-DOS (FAT)" (or "MS-DOS (FAT32)" if it appears)
9. Ensure that "Scheme" is set to "Master Boot Record"
   • If "Scheme" does not appear, click "Cancel" and make sure to choose the device instead of a volume
10. Click "Erase"
11. Wait for the format to finish
12. Click "Close"
13. If the SD card had any files and folders on it before the format, copy everything back from your computer, unless you were linked to this by another guide that needs the SD to be formatted and blank

"en" dir="ltr" class="mw-content-ltr">OS X Yosemite (10.10) and earlier=

1. Insert your SD card into your computer
2. If the SD card has any files and folders on it, copy everything to a folder on your computer
3. Run the Disk Utility app
4. Select your SD card in the left panel
   

   Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive!

5. Click "Partition" at the top
   • If "Partition" does not appear, make sure to choose the device instead of a volume
6. Ensure that "Partition Layout" is set to "1 Partition"
7. Enter anything for "Name"
8. Ensure that "Format" is set to "MS-DOS (FAT)"
9. Click "Options" below the partition table
10. Choose "Master Boot Record"
11. Click "OK"
12. Click "Apply"
13. Click "Partition"
14. Wait for the format to finish
15. Close Disk Utility
16. If the SD card had any files and folders on it before the format, copy everything back from your computer unless you were linked to this by another guide that needs the SD to be formatted and blank