Formatear una tarjeta SD/Mac

Esta es una sección complementaria para formatear una tarjeta SD a FAT32.

Si la consola ya reconoce la tarjeta SD, no es necesario seguir esta guía.

Esta página es solo para usuarios de Mac. Si no estas en Mac, ve a las páginas de Windows o Linux.

Instrucciones

OS X El Capitan (10.11) y versiones posteriores<span lang

1. Inserta tu tarjeta SD en tu computadora
2. Si la tarjeta SD tiene archivos y carpetas, copia todo a una carpeta en tu computadora
3. Abre la aplicación Utilidad de Discos
4. Arriba a la izquierda, en el menú "Visualización", selecciona "Mostrar todos los dispositivos"
5. Selecciona tu tarjeta SD en el panel izquierdo
   

   Asegúrate de seleccionar la letra de unidad correcta, de lo contrario, podrías accidentalmente eliminar la unidad incorrecta!

6. Click "Erase" at the top
7. Enter anything for "Name"
8. Ensure that "Format" is set to "MS-DOS (FAT)" (or "MS-DOS (FAT32)" if it appears)
9. Ensure that "Scheme" is set to "Master Boot Record"
   • If "Scheme" does not appear, click "Cancel" and make sure to choose the device instead of a volume
10. Click "Erase"
11. Wait for the format to finish
12. Click "Close"
13. If the SD card had any files and folders on it before the format, copy everything back from your computer, unless you were linked to this by another guide that needs the SD to be formatted and blank

"en" dir="ltr" class="mw-content-ltr">OS X Yosemite (10.10) and earlier=

1. Insert your SD card into your computer
2. If the SD card has any files and folders on it, copy everything to a folder on your computer
3. Run the Disk Utility app
4. Select your SD card in the left panel
   

   Make sure you choose the correct device, otherwise you might accidentally erase the wrong drive!

5. Click "Partition" at the top
   • If "Partition" does not appear, make sure to choose the device instead of a volume
6. Ensure that "Partition Layout" is set to "1 Partition"
7. Enter anything for "Name"
8. Ensure that "Format" is set to "MS-DOS (FAT)"
9. Click "Options" below the partition table
10. Choose "Master Boot Record"
11. Click "OK"
12. Click "Apply"
13. Click "Partition"
14. Wait for the format to finish
15. Close Disk Utility
16. If the SD card had any files and folders on it before the format, copy everything back from your computer unless you were linked to this by another guide that needs the SD to be formatted and blank