Toggle search
Toggle menu
303
299
452
7K
Hacks Guide Wiki
Toggle preferences menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.

3DS:System Transfer/Target is stock: Difference between revisions

From Hacks Guide Wiki
More actions
m (11.16.0-49)
(removed Picross requirement, fixed typos and revised info, removed page WIP (system transfer section WIP still active))
Line 1: Line 1:
{{Page WIP|notes=Check that this actually makes sense? I might have missed some important steps...}}
Due to seedminer being the current exploit method, it is easier to perform a System Transfer before setting up custom firmware on the target console. Dumping the source console's <code>movable.sed</code> before performing the transfer means that seedminer can be bypassed entirely on the target console after.
{{System version outdated article|console=ctr|sysversion=11.16.0-49|reason=''New update may have changed the need for seedminer.''}}
Due to seedminer being the current exploit method, it is easier to perform a System Transfer first, before setting up custom firmware on the target console. Dumping the source console's <code>movable.sed</code> before performing the transfer means that seedminer can be bypassed entirely on the target console after.


If the target console does already has CFW, follow [[../Target has CFW|this guide]] instead.
If the target console does already has CFW, follow [[../Target has CFW|this guide]] instead.


== What You Need ==
== What You Need ==
* The game "Pokémon Picross" (free on eShop) installed on the source device
** You can scan [http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=ESHOP://50010000037815&margin=0&qzone=1&size=400x400&ecc=L this QR code] using the Nintendo 3DS Camera for a direct link to the eShop app
** Your SD card must be inserted in your device to install Pokémon Picross
* The latest release of [https://github.com/d0k3/GodMode9/releases/latest GodMode9] (the GodMode9 <code>.zip</code> file)
* The latest release of [https://github.com/d0k3/GodMode9/releases/latest GodMode9] (the GodMode9 <code>.zip</code> file)


Line 21: Line 16:
*# Copy the <code>gm9</code> folder from the GodMode9 <code>.zip</code> to the root of your SD card
*# Copy the <code>gm9</code> folder from the GodMode9 <code>.zip</code> to the root of your SD card
*# Reinsert your SD card into your device
*# Reinsert your SD card into your device
*# Power on your device


=== Section II - NAND Backup and movable.sed ===
=== Section II - NAND Backup and movable.sed ===
Line 39: Line 33:
# Press {{B|A}} to confirm
# Press {{B|A}} to confirm
#* This process will take some time
#* This process will take some time
#* If you get an error, make sure that you have at least 1.3GB of free spaec on your SD card
#* If you get an error, make sure that you have at least 1.3GB of free space on your SD card
# Press {{B|A}} to continue
# Press {{B|A}} to continue
# Press {{B|B}} to return to the main menu
# Press {{B|B}} to return to the main menu
# Select "Exit"
# Select "Exit"
# Press {{B|A}} to relock write permissions if prompted
# Press {{B|A}} to relock write permissions if prompted
# Press and hold {{B|R}}, then press {{B|Start}} to power off your device
# Insert your SD card into your computer
# Copy <code><date>_<serialnumber>_sysnand_00.bin</code>, <code><date>_<serialnumber>_sysnand_00.bin.sha</code>, and <code><serialnumber>_movable_00.sed></code> from <code>/gm9/out</code> to a safe place on your computer, then delete the <code>.bin</code> and <code>.bin.sha</code> files from the SD card
# Reinsert your SD card into your device


{{info|text=Your <code>movable.sed</code> file is now available at <code>/gm9/out/</code> with a name that looks like <code><serialnumber>_movable_##.sed</code>. Use this for tools like PicHaxx Injector.}}
{{info|text=The above files should be kept safe, preferably in multiple locations. Use the <code>movable.sed</code> for tools like PicHaxx Injector or unSAFE_MODE Exploit Injector.}}


=== Section IV - System Transfer ===
=== Section III - System Transfer ===


{{Section WIP|notes=Steps if someone could not use "PC-Based Transfer"}}
{{Section WIP|notes=Steps if someone could not use "PC-Based Transfer"}}


# Perform the system transfer as usual
# Perform the system transfer as usual.
#* If this is from an Old 3DS to a New 3DS, it is best to use "PC-Based Transfer", unless it is impossible to do. The "Wireless Transfer" option is very slow (taking about 2 hours to transfer 1GB)
#* It is recommended to use "PC-Based Transfer" if possible, especially if transferring from an Old 3DS to a New 3DS. The "Wireless Transfer" option is very slow (taking up to 2 hours to transfer 1GB depending on conditions - an Old 3DS to New 3DS will always be on the slower end)


{{info|text='''The source console is finished.''' The following pages can be performed on '''the target console only'''.}}
{{info|text='''The source console is finished.''' The following pages can be performed on '''the target console only'''.}}

Revision as of 03:43, 23 September 2022

Due to seedminer being the current exploit method, it is easier to perform a System Transfer before setting up custom firmware on the target console. Dumping the source console's movable.sed before performing the transfer means that seedminer can be bypassed entirely on the target console after.

If the target console does already has CFW, follow this guide instead.

What You Need

  • The latest release of GodMode9 (the GodMode9 .zip file)

Instructions

Section I - Prep Work

  • For the source console only, perform the following steps:
    1. Power off your device
    2. Insert your SD card into your computer
    3. Copy GodMode9.firm from the GodMode9 .zip to the /luma/payloads/ folder on your SD card
    4. Copy the gm9 folder from the GodMode9 .zip to the root of your SD card
    5. Reinsert your SD card into your device

Section II - NAND Backup and movable.sed

  1. Press and hold Start, and while holding Start, power on your device. This will launch GodMode9
  2. Press Home to bring up the action menu
  3. Select "Scripts..."
  4. Select "GM9Megascript"
  5. Select "Dump Options"
  6. Select "System File Dump Options"
  7. Select "Dump movable.sed"
  8. Press A to confirm
  9. Press A to continue
  10. Press B twice to return to the main menu
  11. Select "Backup Options"
  12. Select "SysNAND Backup"
  13. Press A to confirm
    • This process will take some time
    • If you get an error, make sure that you have at least 1.3GB of free space on your SD card
  14. Press A to continue
  15. Press B to return to the main menu
  16. Select "Exit"
  17. Press A to relock write permissions if prompted
  18. Press and hold R, then press Start to power off your device
  19. Insert your SD card into your computer
  20. Copy <date>_<serialnumber>_sysnand_00.bin, <date>_<serialnumber>_sysnand_00.bin.sha, and <serialnumber>_movable_00.sed> from /gm9/out to a safe place on your computer, then delete the .bin and .bin.sha files from the SD card
  21. Reinsert your SD card into your device
OOjs UI icon information-progressive.svg The above files should be kept safe, preferably in multiple locations. Use the movable.sed for tools like PicHaxx Injector or unSAFE_MODE Exploit Injector.

Section III - System Transfer

  1. Perform the system transfer as usual.
    • It is recommended to use "PC-Based Transfer" if possible, especially if transferring from an Old 3DS to a New 3DS. The "Wireless Transfer" option is very slow (taking up to 2 hours to transfer 1GB depending on conditions - an Old 3DS to New 3DS will always be on the slower end)
OOjs UI icon information-progressive.svg The source console is finished. The following pages can be performed on the target console only.

After the setup

You will want to use faketik to restore homebrew applications that disappear after the transfer. You should do this after "Finalizing Setup".

Continue to Installing boot9strap (USM)
Retrieved from "https://wiki.hacks.guide/w/index.php?title=3DS:System_Transfer/Target_is_stock&oldid=2160"