3DS:Bmbt3DS: Difference between revisions

Line 35:

===Section II - Running the test===

#Power on the console without pressing any buttons

<ol>

<li> Power on the console without pressing any buttons</li>

{{Info|text=This payload does not show anything on either screens until a button is pressed. Refer to the attached image for what parts of the screen will light up for each button pressed.|image=[[File:Bmbt.png|384px]]}}

#Press each button once, verifying that the corresponding button shows up on the top screen. If it does not show up, the button pressed may be faulty. If you see a constant white square for one button and you are ~~_not_~~ holding the button down, that button may be stuck and could be the source of some issues.

<li> Press each button once, verifying that the corresponding button shows up on the top screen. If it does not show up, the button pressed may be faulty. If you see a constant white square for one button and you are '''not''' holding the button down, that button may be stuck and could be the source of some issues.</li>

#Once you are finished with the button tester, press the power button once to power off the console

<li> Once you are finished with the button tester, press the power button once to power off the console</li>

#Remove the SD card from your console and insert it into your computer

<li> Remove the SD card from your console and insert it into your computer</li>

#Delete <code>boot.firm</code> from the root of your SD card

<li> Delete <code>boot.firm</code> from the root of your SD card</li>

#Rename <code>luma.firm</code> to <code>boot.firm</code>

<li> Rename <code>luma.firm</code> to <code>boot.firm</code></li>

#Safely eject the SD card from your computer and reinsert it into your console

<li> Safely eject the SD card from your computer and reinsert it into your console</li>

#Power on your console{{Success|text=If all went well, you have successfully tested the buttons on your console.}}

<li> Power on your console</li>

</ol>

{{Success|text=If all went well, you have successfully tested the buttons on your console.}}

@@ Line 35: / Line 35: @@
 ===Section II - Running the test===
-#Power on the console without pressing any buttons
+<ol>
+<li> Power on the console without pressing any buttons</li>
 {{Info|text=This payload does not show anything on either screens until a button is pressed. Refer to the attached image for what parts of the screen will light up for each button pressed.|image=[[File:Bmbt.png|384px]]}}
-#Press each button once, verifying that the corresponding button shows up on the top screen. If it does not show up, the button pressed may be faulty. If you see a constant white square for one button and you are _not_ holding the button down, that button may be stuck and could be the source of some issues.
+<li> Press each button once, verifying that the corresponding button shows up on the top screen. If it does not show up, the button pressed may be faulty. If you see a constant white square for one button and you are '''not''' holding the button down, that button may be stuck and could be the source of some issues.</li>
-#Once you are finished with the button tester, press the power button once to power off the console
+<li> Once you are finished with the button tester, press the power button once to power off the console</li>
-#Remove the SD card from your console and insert it into your computer
+<li> Remove the SD card from your console and insert it into your computer</li>
-#Delete <code>boot.firm</code> from the root of your SD card
+<li> Delete <code>boot.firm</code> from the root of your SD card</li>
-#Rename <code>luma.firm</code> to <code>boot.firm</code>
+<li> Rename <code>luma.firm</code> to <code>boot.firm</code></li>
-#Safely eject the SD card from your computer and reinsert it into your console
+<li> Safely eject the SD card from your computer and reinsert it into your console</li>
-#Power on your console{{Success|text=If all went well, you have successfully tested the buttons on your console.}}
+<li> Power on your console</li>
+</ol>
+{{Success|text=If all went well, you have successfully tested the buttons on your console.}}
+{{Short description|Bare-metal button tester for the 3DS}}