3DS:Alternate Exploits/Installing boot9strap (safecerthax): Difference between revisions

From Hacks Guide Wiki

More actions

Retrieved from "https://wiki.hacks.guide/wiki/3DS:Alternate_Exploits/Installing_boot9strap_(safecerthax)"

@@ Line 1: / Line 1: @@
-{{imbox
+== Technical Details ==
-| text = <big>'''This is now on the main guide!'''</big><br>{{Clickable button 2|3dsguide:installing-boot9strap-(safecerthax)|View on 3DS Hacks Guide|class=mw-ui-progressive}}
+For technical details on the exploit that you will be using on this page, see [https://github.com/MrNbaYoh/safecerthax here].
-}}
+== Compatibility Notes ==
+safecerthax is compatible with all Old 3DS and Old 2DS consoles in all regions on system versions 1.0.0 through 11.14.0.
+==Instructions==
+====Section I - Hardware Button Check====
+#Power on your console
+#Once you see the HOME Menu, press the (Left Shoulder) and (Right Shoulder) buttons at the same time
+#*The camera applet should appear
+#*If the console crashes, just continue to the next section
+#Power off your console
+If the camera did NOT appear, you cannot follow this method as your shoulder buttons are broken
+====Section II - Prep Work====
+#Insert your SD card into your computer
+#Copy <code>boot.firm</code> and <code>boot.3dsx</code> from the Luma3DS <code>.zip</code> to the root of your SD card
+#*The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+#Create a folder named <code>boot9strap</code> on the root of your SD card
+#Copy <code>boot9strap.firm</code> and <code>boot9strap.firm.sha</code> from the boot9strap <code>.zip</code> to the <code>/boot9strap/</code> folder on your SD card
+#Copy <code>SafeB9SInstaller.bin</code> from the SafeB9SInstaller <code>.zip</code> to the root of your SD card
+#Reinsert your SD card into your console
+#Power on your console
+====Section III - safecerthax proxy====
+#Launch the System Settings application
+#Navigate to <code>Internet Settings</code> -> <code>Connection Settings</code>
+#Click on your network connection slot and navigate to <code>Change Settings</code> -> <code>Next Page (right arrow)</code> -> <code>Proxy Settings</code>
+#Set “Proxy Settings” to “Yes”, then click <code>Detailed Setup</code>
+#Set the Proxy Server to <code>ssloth.nintendohomebrew.com</code>, and the Port to <code>8080</code>
+#Click OK, then click Save
+#When prompted, click “Test” to perform the connection test
+#*The test should succeed
+#Click “OK” to continue
+#Power off your console
+====Section IV - safecerthax====
+#With your console still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), and while holding these buttons together, power on your console
+#*Keep holding the buttons until the console boots into Safe Mode (a “system update” menu)
+#Press “OK” to accept the update
+#*There is no update. This is part of the exploit
+#Press “I accept” to accept the terms and conditions
+#The update will eventually fail, with the error code <code>003-1099</code>. This is intended behaviour
+#Press “OK” to close the error message
+#If the exploit was successful, you will have booted into SafeB9SInstaller
+#*If the console freezes or crashes, force power off the console, then retry this section
+====Section V - Installing boot9strap====
+#When prompted, input the key combo given on the top screen to install boot9strap
+#*If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, [[3dsguide:troubleshooting#issues-with-safeb9sinstaller|follow this troubleshooting guide]]
+#Once it is complete, press (A) to reboot your console
+#Your console should have booted into the Luma3DS configuration menu
+#*Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+#*For the purpose of this guide, '''leave these options on the default settings''' (do not check or uncheck anything)
+#*If your console shuts down when you try to power it on, ensure that you have copied <code>boot.firm</code> from the Luma3DS <code>.zip</code> to the root of your SD card
+#Press (Start) to save and reboot
+At this point, your console will boot to Luma3DS by default.
+*Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+*On the next page, you will install useful homebrew applications to complete your setup.
+====Section VI - Restoring default proxy====
+#Launch the System Settings application
+#Navigate to <code>Internet Settings</code> -> <code>Connection Settings</code>
+#Click on your network connection slot and navigate to <code>Change Settings</code> -> <code>Next Page (right arrow)</code> -> <code>Proxy Settings</code>
+#Set “Proxy Settings” to “No”
+#Click OK, then click Save
+#When prompted, click “Test” to perform the connection test
+#*The test should succeed
+#Power off your console
+-----
+<span style="font-size:200%;">Continue to [[3dsguide:finalizing-setup|Finalizing Setup]]</span>
 [[Category:Nintendo 3DS guides]]