3DS:Alternate Exploits/Installing boot9strap (SSLoth-Browser)

Required Reading

new-browserhax and old-browserhax is a browser exploit for system version 11.4.0-11.13.0. This can be used in conjunction with SSLoth, allowing users on version 11.13.0 and below to bypass the browser version check, and universal-otherapp, to install custom firmware on the console.

If you have updated your device to your current version using a cartridge, your Internet Browser will be inaccessible. If this is the case, you will need to update your device to the latest version through System Settings and then follow the method for the latest version.

What You Need

• The latest release of universal-otherapp
• The latest release of SafeB9SInstaller (direct download)
• The latest release of boot9strap (direct download)
• The latest release of Luma3DS (the Luma3DS .zip file)

Instructions

Section I - Prep Work

1. Power off your device
2. Insert your SD card into your computer
3. Copy otherapp.bin to the root of your SD card and rename it to arm11code.bin
   • If you do not see the .bin extension, do not add it to the end of the filename
4. Copy boot.firm and boot.3dsx from the Luma3DS .zip to the root of your SD card
5. Create a folder named boot9strap on the root of your SD card
6. Copy boot9strap.firm and boot9strap.firm.sha from the boot9strap .zip to the /boot9strap/ folder on your SD card
7. Copy SafeB9SInstaller.bin from the SafeB9SInstaller .zip to the root of your SD card
8. Reinsert your SD card into your device
9. Power on your device

Section II - SSLoth

1. Launch the System Settings application
2. Navigate to Internet Settings -> Connection Settings
3. Click on your network connection slot and navigate to Change Settings -> Next Page (right arrow) -> Proxy Settings
4. Set "Proxy Settings" to "Yes", then click Detailed Setup
5. Set the Proxy Server to 192.9.234.11, and the Port to 8080
6. Click OK, then click Save
7. When prompted, click "Test" to perform the connection test
   • The test should succeed
8. Click "OK" to continue
9. Press "Back" twice, then "Close" to go back to the HOME Menu

Section III - Launching SafeB9SInstaller

1. On the HOME Menu, press the Left and Right shoulder buttons together to open the camera
   • If you are unable to open the camera, open the Internet Browser and manually type the URL instead (https://zoogie.github.io/web/nbhax/)
2. Tap the QR code button and scan this QR code
   • If the browser prompts an update, it is possible that your ISP is rerouting DNS changes. Try another internet connection, or update your console to the latest version and follow Seedminer.
3. If the exploit was successful, you will have booted into SafeB9SInstaller

Section IV - Installing boot9strap

1. When prompted, input the key combo given on the top screen to install boot9strap
2. Once it is complete, press (A) to reboot your device
3. Your device should have rebooted into the Luma3DS configuration menu
   • If your device shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
4. Press (Start) to save and reboot
   • If you get an error, just continue to the next section

At this point, your console will boot to Luma3DS by default. Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. On the next page, you will install useful homebrew applications to complete your setup.

Section VI - Restoring default DNS

1. Launch the System Settings application
2. Navigate to Internet Settings -> Connection Settings
3. Click on your network connection slot and navigate to Change Settings -> Next Page (right arrow) -> Proxy Settings
4. Set "Proxy Settings" to "No"
5. Click OK, then click Save
6. When prompted, click "Test" to perform the connection test
   • The test should succeed
7. Power off your device

---

Continue to Finalizing Setup