3DS:Alternate Exploits/Installing boot9strap (Frogtool)

Required Reading

We will now use our Homebrew Launcher access to run the Frogtool utility in order to inject the exploitable Japanese version of the "Flipnote Studio" title, which we then use to run b9sTool and install boot9strap.

This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed here.

To use the magnet links on this page, you will need a torrent client like Deluge.

What You Need

• Your movable.sed file from completing Seedminer or nimhax
• frogcert.bin (magnet link)
• The latest release of Frogtool
• The latest release of b9sTool

Instructions

Section I - Prep Work

1. Power off your device
2. Insert your SD card into your computer
3. Copy your movable.sed file to the root of your SD card
   • If you followed nimhax, this will already be on your SD card
4. Copy boot.firm and boot.3dsx from the Luma3DS .zip to the root of your SD card
5. Copy boot.nds (b9sTool) from the b9sTool release .zip to the root of your SD card
6. Copy Frogtool.3dsx to the /3ds/ folder on your SD card
7. Copy frogcert.bin to the root of your SD card
8. Reinsert your SD card into your device
9. Power on your device

Section II - Patching DS Download Play

1. Open the Homebrew Launcher using any method
2. Launch Frogtool from the list of homebrew
3. Select the "INJECT patched DS Download Play" option
4. Frogtool will automatically run and inject the JPN version of Flipnote Studio into your DS Download Play
5. Once this operation has finished, read the screens and check if the process was successful
   • If there are any errors or missing files, correct the problem and try again
6. If the process was successful, tap the touch screen, then select "BOOT patched DS Download Play"
7. If the exploit was successful, your device will have loaded the JPN version of Flipnote Studio

Section III - Flipnote Exploit

If you would prefer a visual guide to this section, one is available here.

1. Complete the initial setup process for the launched game until you reach the main menu
   • Select the left option whenever prompted during the setup process
2. Using the touch-screen, select the large left box, then select the box with an SD card icon
3. Once the menu loads, select the face icon, then the bottom right icon to continue
4. Press (X) or (UP) on the D-Pad depending on which is shown on the top screen
5. Select the second button along the top with a film-reel icon
6. Scroll right until reel "3/3" is selected
7. Tap the third box with the letter "A" in it
8. Scroll left until reel "1/3" is selected
9. Tap the fourth box with the letter "A" in it
10. If the exploit was successful, your device will have loaded b9sTool
11. Using the D-Pad, move to "Install boot9strap"
    • If you miss this step, the system will exit to home menu instead of installing boot9strap and you will need to open DS Download Play and start over from the beginning of this section
12. Press (A), then press START and SELECT at the same time to begin the process
13. Once complete and the bottom screen says "done.", exit b9sTool, then power off your device
    • You may have to force power off by holding the power button
    • If your device shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
    • If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide

Section IV - Luma3DS Verification

1. Power off your device
2. Insert your SD card into your computer
   • The existence of these folders and files confirms that Luma3DS is installed
   • If you do not see the luma folder or config.ini, follow this troubleshooting guide

At this point,your console will boot to Luma3DS by default.

• Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
• On the next page, you will install useful homebrew applications to complete your setup.

Section V - Restoring DS Download Play

1. Launch the Download Play application
2. Wait until you see the two buttons
   • Do not press either of the buttons
3. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
4. Select "Miscellaneous options"
5. Select "Switch the hb. title to the current app."
6. Press (B) to continue
7. Press (B) to return to the Rosalina main menu
8. Press (B) to exit the Rosalina menu
9. Press (Home), then close Download Play
10. Relaunch the Download Play application
11. Your device should load the Homebrew Launcher
12. Launch Frogtool from the list of homebrew
13. Select the "RESTORE patched DS Download Play" option
14. Once this operation has finished, read the screens and check if the process was successful
    • If there are any errors or missing files, correct the problem and try again
15. If the process was successful, tap the touch screen, then press START to exit

---

Continue to Finalizing Setup