3DS:Fastboot3DS to boot9strap: Difference between revisions

Line 23:

# Press and hold {{B|HOME}}, and while holding {{B|HOME}}, power on your console. This will launch the fastboot3DS menu

# Select <code>[+] Boot from file...</code> -> <code>sdmc:</code> -> <code>~~safeB9SInstaller~~.firm</code>

# Select <code>[+] Boot from file...</code> -> <code>sdmc:</code> -> <code>SafeB9SInstaller.firm</code>

# You will have booted into safeB9SInstaller

# When prompted, input the key combo given on the top screen to install boot9strap

#* If the top screen is blank, power off your device and re-do Section II

# Once it is complete, press (A) to reboot your device

#* Your console may have rebooted into the Luma3DS configuration menu

#* Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging

#* For the purpose of this guide, '''leave these options on the default settings''' (do not check or uncheck anything)

#* If your device shuts down when you try to power it on, ensure that you have copied <code>boot.firm</code> from the Luma3DS <code>.zip</code> to the root of your SD card

#* press {{B|START}} to save and reboot

-----

@@ Line 23: / Line 23: @@
 # Press and hold {{B|HOME}}, and while holding {{B|HOME}}, power on your console. This will launch the fastboot3DS menu
-# Select <code>[+] Boot from file...</code> -> <code>sdmc:</code> -> <code>safeB9SInstaller.firm</code>
+# Select <code>[+] Boot from file...</code> -> <code>sdmc:</code> -> <code>SafeB9SInstaller.firm</code>
 # You will have booted into safeB9SInstaller
 # When prompted, input the key combo given on the top screen to install boot9strap
 #* If the top screen is blank, power off your device and re-do Section II
 # Once it is complete, press (A) to reboot your device
+#* Your console may have rebooted into the Luma3DS configuration menu
+#* Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+#* For the purpose of this guide, '''leave these options on the default settings''' (do not check or uncheck anything)
+#* If your device shuts down when you try to power it on, ensure that you have copied <code>boot.firm</code> from the Luma3DS <code>.zip</code> to the root of your SD card
+#* press {{B|START}} to save and reboot
+{{Luma3DS is default}}
 -----