3DS:Hardware test: Difference between revisions

Line 24:

<span>

# ~~Place~~ <code>3ds_hw_test.firm</code> ~~file in~~ <code>sd:/luma/payloads</code> on the SD card

# Power off the console and insert your SD card into your computer

# ~~Turn~~ on ~~your 3DS~~ while holding {{B|START}} to open Luma3DS chainloader

# Copy <code>3ds_hw_test.firm</code> to <code>sd:/luma/payloads</code>

#* If ~~the~~ chainloader ~~is not opening~~, follow [[3dsguide:restoring-updating-cfw.html|Restoring / Updating CFW]] and try again

# Reinsert the SD card into your console

#* If it ~~still wont open~~ follow the boot9strap ~~instructions~~ above

# power on the console while holding {{B|START}} to open Luma3DS chainloader

#* If you dont see Luma3DS chainloader, follow [[3dsguide:restoring-updating-cfw.html|Restoring / Updating CFW]] and try again

#* If you still don't see it follow the boot9strap tab above instead

# Select <code>3ds_hw_test</code>

# Press any button to start the test

Line 36:

Line 38:

#* If the number on this line is 0, your console's RAM is not the issue

#* If the number on this line is not 0, your console's RAM is dying and you need to either repair or replace the motherboard

</span>

|-|boot9strap=

Line 59:

Line 62:

<span>

#~~Place~~ <code>3ds_hw_test.firm</code> in the root of your SD card

# Power off the console and insert your SD card into your computer

#~~Turn~~ on ~~your 3DS~~ while holding {{B|HOME}} to enter the fastboot3DS menu

# Copy <code>3ds_hw_test.firm</code> to the root of your SD card

#Select <code>[+]Boot from file...</code> -> <code>sdmc:</code> -> <code>3ds_hw_test.firm</code>

# Reinsert the SD card into your console

# power on the console while holding {{B|HOME}} to enter the fastboot3DS menu

# Select <code>[+]Boot from file...</code> -> <code>sdmc:</code> -> <code>3ds_hw_test.firm</code>

# Press any button to start the test

#* The test will take around 30 minutes for an old model and around 45 for a new model

@@ Line 24: / Line 24: @@
 <span>
-# Place <code>3ds_hw_test.firm</code> file in <code>sd:/luma/payloads</code> on the SD card
+# Power off the console and insert your SD card into your computer
-# Turn on your 3DS while holding {{B|START}} to open Luma3DS chainloader
+# Copy <code>3ds_hw_test.firm</code> to <code>sd:/luma/payloads</code>
-#* If the chainloader is not opening, follow [[3dsguide:restoring-updating-cfw.html|Restoring / Updating CFW]] and try again
+# Reinsert the SD card into your console
-#* If it still wont open follow the boot9strap instructions above
+# power on the console while holding {{B|START}} to open Luma3DS chainloader
+#* If you dont see Luma3DS chainloader, follow [[3dsguide:restoring-updating-cfw.html|Restoring / Updating CFW]] and try again
+#* If you still don't see it follow the boot9strap tab above instead
 # Select <code>3ds_hw_test</code>
 # Press any button to start the test
@@ Line 36: / Line 38: @@
 #* If the number on this line is 0, your console's RAM is not the issue
 #* If the number on this line is not 0, your console's RAM is dying and you need to either repair or replace the motherboard
+</span>
 |-|boot9strap=
@@ Line 59: / Line 62: @@
 <span>
-#Place <code>3ds_hw_test.firm</code> in the root of your SD card
+# Power off the console and insert your SD card into your computer
-#Turn on your 3DS while holding {{B|HOME}} to enter the fastboot3DS menu
+# Copy <code>3ds_hw_test.firm</code> to the root of your SD card
-#Select <code>[+]Boot from file...</code> -> <code>sdmc:</code> -> <code>3ds_hw_test.firm</code>
+# Reinsert the SD card into your console
+# power on the console while holding {{B|HOME}} to enter the fastboot3DS menu
+# Select <code>[+]Boot from file...</code> -> <code>sdmc:</code> -> <code>3ds_hw_test.firm</code>
 # Press any button to start the test
 #* The test will take around 30 minutes for an old model and around 45 for a new model