3DS:Hardware test: Difference between revisions

Line 14:

=== What You Need ===

* ~~Either of the following~~:

* [[3DS:boot9strap|boot9strap]] or [[3DS:fastboot3DS|fastboot3DS]] installed to FIRM partition(s)

** [[3DS:Luma3DS|Luma3DS]]' <code>boot.firm</code> on the root of ~~the~~ SD card

* [[3DS:Luma3DS|Luma3DS]]' <code>boot.firm</code> on the root of your SD card

** [[3DS:fastboot3DS|fastboot3DS]] installed to FIRM partition(s)

* The latest release of {{GitHub|aspargas2/3ds_hw_test/releases|3ds_hw_test}} (the <code>3ds_hw_test.firm</code> file)

Line 22:

Line 21:

|-|Luma3DS=

|-|~~Luma3DS~~=

<span>

# Place <code>3ds_hw_test.firm</code> file in <code>sd:/luma/payloads</code> on the SD card

# Turn on your 3DS while holding {{B|START}} to open Luma3DS chainloader

#* If the chainloader is not opening, follow [[3dsguide:restoring-updating-cfw.html|Restoring / Updating CFW]] and try again

#* If it still wont open follow the boot9strap instructions above

# Select <code>3ds_hw_test</code>

# Press any button to start the test

#* The test will take around 30 minutes for an old model and around 45 for a new model

#** If you are unsure what model the console is, look at the shoulder buttons - a new model has four ({{Key press|L|ZL|ZR|R}}), and an old model has two ({{Key press|L|R}}

# When the test finishes, press any button to turn the console off and insert your SD into your computer

# Open the newly generated <code>sd:/HWTEST.LOG</code> file in a text editor, then scroll to the end and look at the line that says <code>[ARM11] Done. ___ total errors detected.</code>

#* If the number on this line is 0, your console's RAM is not the issue

#* If the number on this line is not 0, your console's RAM is dying and you need to either repair or replace the motherboard

|-|Boot9strap=

<span>

@@ Line 14: / Line 14: @@
 === What You Need ===
-* Either of the following:
+* [[3DS:boot9strap|boot9strap]] or [[3DS:fastboot3DS|fastboot3DS]] installed to FIRM partition(s)
-** [[3DS:Luma3DS|Luma3DS]]' <code>boot.firm</code> on the root of the SD card
+* [[3DS:Luma3DS|Luma3DS]]' <code>boot.firm</code> on the root of your SD card
-** [[3DS:fastboot3DS|fastboot3DS]] installed to FIRM partition(s)
 * The latest release of {{GitHub|aspargas2/3ds_hw_test/releases|3ds_hw_test}} (the <code>3ds_hw_test.firm</code> file)
@@ Line 22: / Line 21: @@
 <tabber>
+|-|Luma3DS=
-|-|Luma3DS=
+<span>
+# Place <code>3ds_hw_test.firm</code> file in <code>sd:/luma/payloads</code> on the SD card
+# Turn on your 3DS while holding {{B|START}} to open Luma3DS chainloader
+#* If the chainloader is not opening, follow [[3dsguide:restoring-updating-cfw.html|Restoring / Updating CFW]] and try again
+#* If it still wont open follow the boot9strap instructions above
+# Select <code>3ds_hw_test</code>
+# Press any button to start the test
+#* The test will take around 30 minutes for an old model and around 45 for a new model
+#** If you are unsure what model the console is, look at the shoulder buttons - a new model has four ({{Key press|L|ZL|ZR|R}}), and an old model has two ({{Key press|L|R}}
+# When the test finishes, press any button to turn the console off and insert your SD into your computer
+# Open the newly generated <code>sd:/HWTEST.LOG</code> file in a text editor, then scroll to the end and look at the line that says <code>[ARM11] Done. ___ total errors detected.</code>
+#* If the number on this line is 0, your console's RAM is not the issue
+#* If the number on this line is not 0, your console's RAM is dying and you need to either repair or replace the motherboard
+|-|Boot9strap=
 <span>