3DS:Hardware test: Difference between revisions

(8 intermediate revisions by 4 users not shown)

Line 8:

}}

'''3ds_hw_test''' is a <code>.firm</code> application that tests a 3DS console's RAM for errors. There are plans to expand the test so it checks more types of hardware, but so far these plans are entirely a work-in-progress.

The test will take roughly 30 minutes on the Original 3DS, 3DS XL and 2DS, and roughly 45 minutes on the New 3DS, New 3DS XL and New 2DS XL.

== Instructions ==

Line 14:

Line 16:

=== What You Need ===

* [[3DS:boot9strap|boot9strap]] or [[3DS:fastboot3DS|fastboot3DS]] installed to FIRM partition(s)

* [[3DS:boot9strap|boot9strap]], [[3DS:GodMode9|GodMode9]] or [[3DS:fastboot3DS|fastboot3DS]] installed to FIRM partition(s), or a [[3ds-guide:ntrboot.html|ntrboot]] compatible flashcart

* [[3DS:Luma3DS|Luma3DS]]' <code>boot.firm</code> on the root of your SD card

* The latest release of {{GitHub|aspargas2/3ds_hw_test/releases|3ds_hw_test}} (the <code>3ds_hw_test.firm</code> file)

Line 25:

Line 27:

# Power off ~~the~~ console ~~and insert~~ your SD card into your computer

# Power off your console

# Insert your SD card into your computer

# Copy <code>3ds_hw_test.firm</code> to the root of your SD card

# Rename <code>boot.firm</code> to <code>luma.firm</code>

Line 32:

Line 35:

# Power on the console without pressing any other buttons

# Press any button to start the test

~~#* The test will take around 30 minutes for an old model and around 45 for a new model~~

# When the test finishes, press any button to power off your console and insert your SD into your computer

~~#** If you are unsure what model the console is, look at the shoulder buttons - a new model has four ({{Key press|L|ZL|ZR|R}}), and an old model has two ({{Key press|L|R}}~~

# When the test finishes, press any button to ~~turn the~~ console ~~off~~ and insert your SD into your computer

# Open the newly generated <code>sd:/HWTEST.LOG</code> file in a text editor, then scroll to the end and look at the line that says <code>[ARM11] Done. ___ total errors detected.</code>

#* If the number on this line is 0, your console's RAM is not the issue

Line 44:

Line 45:

# Power off ~~the~~ console ~~and insert~~ your SD card into your computer

# Power off your console

# Insert your SD card into your computer

# Copy <code>3ds_hw_test.firm</code> to the root of your SD card

# Reinsert the SD card into your console

# ~~power~~ on the console while holding {{B|HOME}} to enter the fastboot3DS menu

# Power on the console while holding {{B|HOME}} to enter the fastboot3DS menu

# Select <code>[+]Boot from file...</code> -> <code>sdmc:</code> -> <code>3ds_hw_test.firm</code>

# Press any button to start the test

~~#* The test will take around 30 minutes for an old model and around 45 for a new model~~

# When the test finishes, press any button to power off your console and insert your SD into your computer

~~#** If you are unsure what model the console is, look at the shoulder buttons - a new model has four ({{Key press|L|ZL|ZR|R}}), and an old model has two ({{Key press|L|R}}~~

# When the test finishes, press any button to ~~turn the~~ console ~~off~~ and insert your SD into your computer

# Open the newly generated <code>sd:/HWTEST.LOG</code> file in a text editor, then scroll to the end and look at the line that says <code>[ARM11] Done. ___ total errors detected.</code>

#* If the number on this line is 0, your console's RAM is not the issue

#* If the number on this line is not 0, your console's RAM is dying and you need to either repair or replace the motherboard

|-|ntrboot=

{{warning|text=If you do not have a flashcart compatible with ntrboot, choose a different option.}}

# Ensure you already have a flashcart with ntrboot flashed. If you haven't flashed your flashcart with ntrboot yet, refer to [https://3ds.hacks.guide/ntrboot this page]

# Power off your console

# Insert your SD card into your computer

# Copy <code>3ds_hw_test.firm</code> to the root of your SD card

# Rename <code>boot.firm</code> to <code>luma.firm</code>

# Rename <code>3ds_hw_test.firm</code> to <code>boot.firm</code>

# Reinsert the SD card into your console

# Insert the flashcart flashed with ntrboot into your console

# Put the magnet into position to trigger the lid sensor. Refer to [https://i.imgur.com/5e3lKe2.png this image for reference]

#* Note, 2DS users will not need a magnet, as their device cannot physically fold. Instead, move the sleep switch to the right

# Press and hold {{Key press|START|SELECT|X}}, then briefly press and hold the power button for 2 to 3 seconds

# Your console should now be booted into 3ds_hw_test

#* If it did not boot and instead booted into the HOME Menu or turned off immediately, power off your console and try again. You may need a few attempts to get the magnet positioning correct

# Press any button to start the test

# When the test finishes, press any button to power off your console and insert your SD into your computer

# Open the newly generated <code>sd:/HWTEST.LOG</code> file in a text editor, then scroll to the end and look at the line that says <code>[ARM11] Done. ___ total errors detected.</code>

#* If the number on this line is 0, your console's RAM is not the issue

#* If the number on this line is not 0, your console's RAM is dying and you need to either repair or replace the motherboard

# Delete <code>boot.firm</code> and rename <code>luma.firm</code> to <code>boot.firm</code>

|-|GodMode9=

{{warning|text=This section only applies to consoles with GodMode9 installed into FIRM0/1.}}

# Power off your console

# Insert your SD card into your computer

# Copy <code>3ds_hw_test.firm</code> to the <code>sd:/gm9/payloads</code> folder of your SD card

# Reinsert the SD card into your console

# Power on the console while holding {{Key press|R|LEFT}} to enter the GodMode9 bootloader menu

# Select <code>Select payload...</code> -> <code>3ds_hw_test.firm</code>

# Press any button to start the test

# When the test finishes, press any button to power off your console and insert your SD into your computer

# Open the newly generated <code>sd:/HWTEST.LOG</code> file in a text editor, then scroll to the end and look at the line that says <code>[ARM11] Done. ___ total errors detected.</code>

#* If the number on this line is 0, your console's RAM is not the issue

#* If the number on this line is not 0, your console's RAM is dying and you need to either repair or replace the motherboard.

|-|Luma3DS chainloader=

# Power off the console and insert your SD card into your computer

# Copy <code>3ds_hw_test.firm</code> to <code>sd:/luma/payloads</code>

# Reinsert the SD card into your console

# Power on the console while holding {{B|START}} to open Luma3DS chainloader

#* If you dont see Luma3DS chainloader, follow [[3dsguide:restoring-updating-cfw.html|Restoring / Updating CFW]] and try again

#* If you still don't see it follow the boot9strap tab above instead

# Select <code>3ds_hw_test</code>

# Press any button to start the test

# When the test finishes, press any button to power off your console and insert your SD into your computer

# Open the newly generated <code>sd:/HWTEST.LOG</code> file in a text editor, then scroll to the end and look at the line that says <code>[ARM11] Done. ___ total errors detected.</code>

#* If the number on this line is 0, your console's RAM is not the issue

#* If the number on this line is not 0, your console's RAM is dying and you need to either repair or replace the motherboard

</tabber>

[[Category:Unbricking]]

[[Category:Nintendo 3DS ~~guides~~]]

[[Category:Nintendo 3DS troubleshooting]]