3DS:Seedminer/Mii mining: Difference between revisions

Latest revision as of 21:40, 3 June 2023

Mii mining is a variant of Seedminer used to find a console's movable.sed without the console needing any internet access. This method is distinct from manual mining and should only be used if both the BFM service and manual mining are confirmed unusuable, as it is significantly more time-consuming.

If the BruteforceMovable service fails with the error We were unable to successfully complete your bruteforce request. :`(, this method will also not work. Read this section of the main page for more information.

Requirements

A computer with a dedicated GPU (graphics card) with Windows, macOS, or Linux installed.
- Integrated graphics are extremely underpowered and are not recommended for this method even as a last resort. If you use them anyway, be aware that mining may take upwards of a day.

Instructions

If you are on Linux, replace py -3 with python3 in all commands.

What you need

The latest release of Seedminer (the Seedminer .zip)
Any 3.x version of python installed
- If you are on Linux, you likely already have Python 3. Check by opening a terminal and entering python3 -V - if this returns a version number, it will work for this guide.

Section I - Prep Work

In this section, you will set up Seedminer and obtain your console's files that are needed for mining.

Extract the contents of the Seedminer .zip and move the folder inside it that matches your OS anywhere on your PC - this Seedminer folder will be where multiple other files are placed
In the Seedminer folder, hold SHIFT and right-click anywhere in the folder's empty space, then click the option that opens a terminal, PowerShell, or Command Prompt
In the opened window, enter the command py -3 -mpip install pycryptodomex - once it's done installing, keep the window open as you will need it later
- If this command fails with the error No module named pip, you must manually install pip. The methods to do this can be found on this page.
Turn your console on while the SD card is inside it
Open the Mii Maker app
Tap the QR Code/Image Options button.
Tap Save Mii as QR Code.
Select any Mii Character (make a new one first if you don't have any), and press OK.
Turn the console off
Put the console's SD card into your computer, navigate to the Nintendo 3DS folder on the SD, and copy the name of the 32-character-long folder directly inside
- This folder, known as the ID0, is system-specific. Only one should be present - if you see multiple, follow these instructions.
- Once you have the ID0, paste it into a document so you can reference it later
Navigate to the DCIM folder on the SD
Look for the QR Code, which will be a .JPG file
- You may have many other files in here already if you use the Nintendo 3DS Camera app
Copy this file to the Seedminer folder on your PC

Section II - Processing Mii QR and Mining

In this section, you will turn the Mii QR code into a usable file and mine movable.sed with it.

Open the editMii website on your computer
Click on "Import from...", then select "QR Code" and upload the Mii QR you copied to a safe place earlier
Click on "Export to...", then select "encrypted (.bin)", this will download a file named input.bin
Copy this input.bin to the Seedminer folder
Open the terminal/PowerShell/Command Prompt window from earlier
Inside this window, enter the command py -3 seedminer_launcher3.py id0 <id0>
- Replace <id0> with the ID0 you copied into a document
Once it completes, enter the command py -3 seedminer_launcher3.py mii <model> <year>
- Replace <model> with the model of your console (new or old) - if you aren't sure, only models with the ZL/ZR buttons and C-Stick are new
- Replace <year> with the year the 3DS was made (you often find this on the backplate) - leave this empty if you aren't sure, in which case it will start from the middle
- If this fails with an error of input.bin is invalid size, remake the input.bin using your QR Code. If it still fails, open a different browser and remake the input.bin there.
- If this fails with an error similar to ./bfcl: Permission denied, and you are on macOS or Linux, enter the command chmod +x bfcl and try again.
- The mining process will usually take up to 90 minutes, depending on luck and your GPU's strength
When it finishes, a file called movable.sed will appear in the Seedminer folder - use this in place of one obtained from BruteforceMovable

Continue with BannerBomb3

@@ Line 1: / Line 1: @@
-==Overview==
+{{hatnote|This article is not for instructions on how to use BruteforceMovable or do manual mining.<br>For help with BruteforceMovable, see the main guide's [[3dsguide:seedminer|Seedminer page.]]<br>For help with manual mining, see [[../Manual_mining|the manual mining page.]]}}
-<big>'''THIS DOESN'T WORK IF SEEDMINER FAILS! DON'T WASTE YOUR TIME!'''</big>
+'''Mii mining''' is a variant of Seedminer used to find a console's <code>movable.sed</code> without the console needing any internet access. This method is distinct from '''manual mining''' and should only be used if both the BFM service and manual mining are confirmed unusuable, as it is significantly more time-consuming.
-Mii Mining is an alternative to using [[3dsguide:seedminer|Seedminer]] to obtain the devices encrpytion key(movable.sed). Use cases:
+{{warning|text=If the BruteforceMovable service fails with the error <code>We were unable to successfully complete your bruteforce request. :`(</code>, this method will also not work. Read [[3DS:Seedminer#Consoles_made_in_2011|this section of the main page]] for more information.}}
-*3DS can't connect to the internet
+==Requirements==
-*3DS is banned(this will not unban it)
+*A computer with a dedicated GPU (graphics card) with Windows, macOS, or Linux installed.
-*3DS screen is damaged
+**Integrated graphics are extremely underpowered and are not recommended for this method even as a last resort. If you use them anyway, be aware that mining may take upwards of a day.
-*3DS is dead
-In order to obtain the encryption key of your device, you will have to brute-force it. This is an advanced process.  If you need help with this or aren't experienced with computers, consider asking in the Nintendo Homebrew Discord instead.
+==Instructions==
+{{info|text=If you are on Linux, replace <code>py -3</code> with <code>python3</code> in all commands.}}
-You will need a graphics card. The more powerful it is, the faster it will be.
-==Windows==
 ===What you need===
+*The latest release of [https://github.com/zoogie/seedminer/releases/latest Seedminer] (the Seedminer .zip)
+*Any 3.x version of [https://www.python.org/downloads/ python] installed
+**If you are on Linux, you likely already have Python 3. Check by opening a terminal and entering <code>python3 -V</code> - if this returns a version number, it will work for this guide.
-*The latest release of [https://github.com/zoogie/seedminer/releases/latest Seedminer](do NOT download the Source code to avoid confusion)
+===Section I - Prep Work===
-*[https://www.python.org/downloads/windows/ Python 3] installed on your computer
+In this section, you will set up Seedminer and obtain your console's files that are needed for mining.
+#Extract the contents of the Seedminer <code>.zip</code> and move the folder inside it that matches your OS anywhere on your PC - this Seedminer folder will be where multiple other files are placed
-===Section I - Obtaining necessary information===
+#In the Seedminer folder, hold SHIFT and right-click anywhere in the folder's empty space, then click the option that opens a terminal, PowerShell, or Command Prompt
+#In the opened window, enter the command <code>py -3 -mpip install pycryptodomex</code> - once it's done installing, keep the window open as you will need it later
-#Insert the SD card into your device
+#*If this command fails with the error <code>No module named pip</code>, you must manually install pip. The methods to do this can be found on [https://pip.pypa.io/en/stable/installation/ this page.]
-#Turn the device on
+#Turn your console on while the SD card is inside it
 #Open the Mii Maker app
 #Tap the '''QR Code/Image Options''' button.
 #Tap '''Save Mii as QR Code'''.
-#Select any Mii Character, and press '''OK'''.
+#Select any Mii Character (make a new one first if you don't have any), and press '''OK'''.
-#Turn the device off
+#Turn the console off
-#Insert the SD card into your computer
+#Put the console's SD card into your computer, navigate to the <code>Nintendo 3DS</code> folder on the SD, and copy the name of the 32-character-long folder directly inside
-#Navigate to the <code>Nintendo 3DS</code> folder on your SD card
+#*This folder, known as the ID0, is system-specific. Only one should be present - if you see multiple, follow [[3dsguide:troubleshooting#multiple-long-names-in-nintendo-3ds-folder|these instructions.]]
-#Copy the name of the 32-letter folder you see directly inside Nintendo 3DS
+#*Once you have the ID0, paste it into a document so you can reference it later
-#*This 32-letter name is system-specific and will be different for each console
+#Navigate to the <code>DCIM</code> folder on the SD
-#*If you see multiple 32-letter folders, follow [https://3ds.hacks.guide/troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder these instructions]
+#Look for the QR Code, which will be a <code>.JPG</code> file
-#*You can ignore the <code>private</code> folder if you have it
+#*You may have many other files in here already if you use the Nintendo 3DS Camera app
-#Paste your 32-letter folder name into a document you can reference later
+#Copy this file to the Seedminer folder on your PC
-#*This folder is known as your “ID0”. Take note of this as this guide will refer to it as such later
-#Navigate to the <code>DCIM</code> folder on your SD card
-#Look for the QR-Code, it will be in the <code>.JPG</code> format
-#*You may have a lot of files in here, if you used the Nintendo 3DS Camera app a lot
-#Copy this file to a safe place on your Computer, like the desktop
-===Section II - Mii Things===
-#Open the [https://zoogie.github.io/web/miiqr/ editMii] Website on your computer
+===Section II - Processing Mii QR and Mining===
+In this section, you will turn the Mii QR code into a usable file and mine <code>movable.sed</code> with it.
+#Open the [https://zoogie.github.io/web/miiqr/ editMii] website on your computer
 #Click on "Import from...", then select "QR Code" and upload the Mii QR you copied to a safe place earlier
 #Click on "Export to...", then select "encrypted (.bin)", this will download a file named <code>input.bin</code>
-#Extract the latest release of Seedminer
+#Copy this <code>input.bin</code> to the Seedminer folder
-#Enter the <code>windows</code> folder
+#Open the terminal/PowerShell/Command Prompt window from earlier
-#Copy the <code>input.bin</code> you downloaded earlier to the <code>windows</code> folder
+#Inside this window, enter the command <code>py -3 seedminer_launcher3.py id0 <id0></code>
-#In the File Explorer, replace the contents of the address bar with <code>cmd</code> and hit Enter
+#*Replace <code><id0></code> with the ID0 you copied into a document
-#*This should launch a command line window
+#Once it completes, enter the command <code>py -3 seedminer_launcher3.py mii <model> <year></code>
-#Enter the commands and hit enter for each one:
+#*Replace <code><model></code> with the model of your console (<code>new</code> or <code>old</code>) - if you aren't sure, only models with the ZL/ZR buttons and C-Stick are new
-##<code>py -3 -m pip install pycryptodomex</code>
+#*Replace <code><year></code> with the year the 3DS was made (you often find this on the backplate) - leave this empty if you aren't sure, in which case it will start from the middle
-##<code>py -3 seedminer_launcher3.py id0 <id0></code>
+#*If this fails with an error of <code>input.bin is invalid size</code>, remake the <code>input.bin</code> using your QR Code. If it ''still'' fails, open a different browser and remake the <code>input.bin</code> there.
-##*Replace <code><id0></code> with the ID0 you pasted into a document
+#*If this fails with an error similar to <code>./bfcl: Permission denied</code>, and you are on macOS or Linux, enter the command <code>chmod +x bfcl</code> and try again.
-#Now enter the command: <code>py -3 seedminer_launcher3.py mii <model> <year></code>
+#*The mining process will usually take up to 90 minutes, depending on luck and your GPU's strength
-#*Replace <code><model></code> with the model of your device(<code>new</code> or <code>old</code>)
+#When it finishes, a file called <code>movable.sed</code> will appear in the Seedminer folder - use this in place of one obtained from BruteforceMovable
-#*Replace <code><year></code> with the year the 3DS was made, you often find this on the backplate, you can leave this empty if you don't know the correct answer
-#*this will take a while
-#When it finishes, you will have a file called <code>movable.sed</code> in the <code>windows</code> folder
+<big>{{success|text=Continue with [[3DS:Alternate Exploits/BannerBomb3|BannerBomb3]]}}</big>
-<big>Continue with the [https://3ds.hacks.guide/seedminer#next-steps-choose-an-exploit normal guide]</big>
+[[Category:Nintendo 3DS guides]]