3DS:Alternate Exploits/Homebrew Launcher (PicHaxx): Difference between revisions

Latest revision as of 01:45, 18 July 2024

This method is no longer accessible due to the closure of the eShop. However, if Pokémon Picross was purchased before closure, it is still usable.

Required Reading

Pichaxx is an exploit for the game Pokémon Picross released by zoogie, originally discovered and demonstrated by MrNbaYoh. This method of using Seedminer for further exploitation uses your movable.sed file to write a custom save file for Pokémon Picross, which can then be used to launch the Homebrew Launcher.

This process requires your console-specific movable.sed file. If you don't have it yet, you can get it by following Seedminer.

This process will overwrite your Pokémon Picross save file, if you have one. If you wish to preserve your Pokémon Picross game data, you should make a backup of your 00000001.sav file before overwriting it.

What You Need

The game "Pokémon Picross" (free on eShop) installed on your device
- You can scan this QR code using the Nintendo 3DS Camera for a direct link to the eShop app
- Your SD card must be inserted in your device to install Pokémon Picross
Your movable.sed file from completing Seedminer
The latest release of Luma3DS (the Luma3DS .zip file)
otherapps.zip

Instructions

Section I - Prep Work

Power off your device
Insert your SD card into your computer
Copy boot.firm and boot.3dsx from the Luma3DS .zip to the root of your SD card
- The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
Copy the otherapp payload for your region/version/model from the otherapps .zip file to the root of your SD card and rename it to otherapp.bin

Section II - PicHaxx

Open the PicHaxx Injector website on your computer
Select your movable.sed file
Select "Build and Download"
Wait for the process to complete
Navigate to Nintendo 3DS -> <ID0> -> <ID1> -> title -> 00040000 -> 0017c100 -> data on your SD card
- The <ID0> will be the same one that you used in Seedminer
- The <ID1> is a 32 character long folder inside of the <ID0>
Copy the newly downloaded 00000001.sav file to the data folder on your SD card
- Overwrite the old save file when prompted
Reinsert your SD card into your device
Power on your device
Launch "Pokémon Picross"
If the exploit was successful, your device will have loaded the Homebrew Launcher
- If you get an error message, follow this troubleshooting guide

Continue to Installing boot9strap (nimdsphax)

@@ Line 1: / Line 1: @@
+{{3DS unavailable eShop|Pokémon Picross}}{{System version outdated article|console=ctr|sysversion=11.17.0-50|reason=The otherapp payload may have been broken in the latest update.}}
 ==Required Reading==
-This method of using Seedminer for further exploitation uses your <code>movable.sed</code> file to write a custom save file for Pokémon Picross, which can then be used with unSAFE_MODE to run SafeB9SInstaller.
+[https://github.com/zoogie/pichaxx Pichaxx] is an exploit for the game Pokémon Picross released by [https://github.com/zoogie zoogie], originally discovered and [https://twitter.com/mrnbayoh/status/744899681663258624?lang=en demonstrated] by [https://github.com/MrNbaYoh MrNbaYoh]. This method of using Seedminer for further exploitation uses your <code>movable.sed</code> file to write a custom save file for Pokémon Picross, which can then be used to launch the Homebrew Launcher.
+{{warning|text=This process requires your console-specific <code>movable.sed</code> file. If you don't have it yet, you can get it by following [[3DS:Seedminer|Seedminer]].}}
 {{warning|text=This process will overwrite your Pokémon Picross save file, if you have one. If you wish to preserve your Pokémon Picross game data, you should make a backup of your <code>00000001.sav</code> file before overwriting it.}}
@@ Line 11: / Line 15: @@
 **You can scan [http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=ESHOP://50010000037815&margin=0&qzone=1&size=400x400&ecc=L this QR code] using the Nintendo 3DS Camera for a direct link to the eShop app
 **Your SD card must be inserted in your device to install Pokémon Picross
-*Your <code>movable.sed</code> file from completing [[3dsguide:seedminer|Seedminer]]
+*Your <code>movable.sed</code> file from completing Seedminer
 * The latest release of [https://github.com/LumaTeam/Luma3DS/releases/latest Luma3DS] (the Luma3DS <code>.zip</code> file)
-*The latest release of [https://github.com/zoogie/unSAFE_MODE/releases/v1.3 unSAFE_MODE]
+*[[Media:Otherapps.zip|otherapps.zip]]
 ==Instructions==
@@ Line 22: / Line 26: @@
 #Insert your SD card into your computer
 # Copy <code>boot.firm</code> and <code>boot.3dsx</code> from the Luma3DS <code>.zip</code> to the root of your SD card
-#Copy the otherapp payload for your region/version from the unSAFE_MODE <code>.zip</code>'s <code>otherapps_with_CfgS</code> folder to the root of your SD card and rename it to <code>otherapp.bin</code>
+#*The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
-#Create a folder named <code>3ds</code> on the root of your SD card
+#Copy the otherapp payload for your region/version/model from the otherapps <code>.zip</code> file to the root of your SD card and rename it to <code>otherapp.bin</code>
-#Copy the <code>slotTool</code> folder from the unSAFE_MODE <code>.zip</code> to the <code>3ds</code> folder on your SD card
 ===Section II - PicHaxx===
-#Open [https://3ds.nhnarwhal.com/3dstools/pichaxx.php the PicHaxx Injector website] on your computer
+#Open [https://3dstools.nhnarwhal.com/#/pichaxx the PicHaxx Injector website] on your computer
 #Select your <code>movable.sed</code> file
 #Select "Build and Download"
 #Wait for the process to complete
 #Navigate to <code>Nintendo 3DS</code> -> <code><ID0></code> -> <code><ID1></code> -> <code>title</code> -> <code>00040000</code> -> <code>0017c100</code> -> <code>data</code> on your SD card
-#*The <code><ID0></code> will be the same one that you used in [[3dsguide:seedminer|Seedminer]]
+#*The <code><ID0></code> will be the same one that you used in [[3DS:Seedminer|Seedminer]]
 #*The <code><ID1></code> is a 32 character long folder inside of the <code><ID0></code>
 #Copy the newly downloaded <code>00000001.sav</code> file to the <code>data</code> folder on your SD card
@@ Line 42: / Line 45: @@
 #*If you get an error message, [[3dsguide:troubleshooting#installing-boot9strap-pichaxx|follow this troubleshooting guide]]
-== Next steps ==
+-----
-At this point, there are a number of processes you may follow. Continue to the next section of the guide based on what you have access to.
+<span style="font-size:200%;">Continue to [[3DS:Alternate Exploits/Installing boot9strap (nimdsphax)|Installing boot9strap (nimdsphax)]]</span>
-{| class="wikitable floatleft" style="text-align:center;"
+[[Category:Nintendo 3DS guides]]
-! Method
-! colspan="3" | Requirements
-|-
-| ---
-! Working shoulder buttons
-! Working DS mode
-!System version
-|-
-|[[3DS:Alternate Exploits/Installing boot9strap (HBL-USM)|Installing boot9strap (HBL-USM)]] (Recommended)
-| bgcolor="ffc8c8" |Yes
-| bgcolor="c8ffc8" |No
-| bgcolor="c8ffc8" | Latest
-|-
-|[[3DS:Alternate Exploits/Installing boot9strap (Frogtool)|Installing boot9strap (Frogtool)]]
-| bgcolor="c8ffc8" |No
-| bgcolor="ffc8c8" |Yes
-| bgcolor="c8ffc8" |Latest
-|}