3DS:Alternate Exploits/Installing boot9strap (Frogtool)

Required Reading

We will now use our Homebrew Launcher access to run the Frogtool utility in order to inject the exploitable Japanese version of the "Flipnote Studio" title, which we then use to run b9sTool and install boot9strap.

This is a currently working implementation of the "FIRM partitions known-plaintext" exploit detailed here.

To use the magnet links on this page, you will need a torrent client like Deluge.

What You Need

• Your movable.sed file from completing Seedminer or nimhax
• frogcert.bin
• The latest release of Frogtool
• One of the following:
  • System version 11.14.0 or 11.15.0: The 6.0.1 release of b9stool (direct download)
  • System version 11.16.0 or later: The 6.1.1 release of b9stool (direct download)

Instructions

Section I - CFW Check

1. Power off your device
2. Hold the (Select) button
3. Power on your device while still holding the (Select) button
4. If the check was successful, you will boot to the HOME Menu and you may proceed with this guide

If you see a configuration menu, you already have CFW, and continuing with these instructions may BRICK your device! Follow Checking for CFW to upgrade your existing CFW.

Section II - Prep Work

1. Power off your device
2. Insert your SD card into your computer
3. Copy your movable.sed file to the root of your SD card
   • If you followed nimhax, this will already be on your SD card
4. Copy boot.firm and boot.3dsx from the Luma3DS .zip to the root of your SD card
5. Copy boot.nds (b9sTool) from the b9sTool release .zip to the root of your SD card
6. Copy Frogtool.3dsx to the /3ds/ folder on your SD card
7. Copy frogcert.bin to the root of your SD card
8. Reinsert your SD card into your device
9. Power on your device

Section III - Patching DS Download Play

1. Open the Homebrew Launcher using any method
2. Launch Frogtool from the list of homebrew
3. Select the "INJECT patched DS Download Play" option
4. Frogtool will automatically run and inject the JPN version of Flipnote Studio into your DS Download Play
5. Once this operation has finished, read the screens and check if the process was successful
   • If there are any errors or missing files, correct the problem and try again
6. If the process was successful, tap the touch screen, then select "BOOT patched DS Download Play"
7. If the exploit was successful, your device will have loaded the JPN version of Flipnote Studio
   • If you get stuck on a black screen, follow this section, then try again

Section IV - Flipnote Exploit

In this section, you will perform a series of very specific steps within Flipnote Studio that, when performed correctly, will launch b9sTool, the boot9strap (custom firmware) installer.

If you would prefer a visual guide to this section, one is available here.

1. Complete the initial setup process for the launched game until you reach the main menu
   • Select the left option whenever prompted during the setup process
2. Using the touch-screen, select the large left box, then select the box with an SD card icon
3. Once the menu loads, select the face icon, then the bottom right icon to continue
4. Press (X) or (UP) on the D-Pad depending on which is shown on the top screen
5. Select the second button along the top with a film-reel icon
6. Scroll right until reel “3/3” is selected
7. Tap the third box with the letter “A” in it
8. Scroll left until reel “1/3” is selected
9. Tap the fourth box with the letter “A” in it
10. If the exploit was successful, your console will have loaded b9sTool

Section V - Installing boot9strap

In this section, you will install custom firmware onto your console.

1. Using the D-Pad, move to "Install boot9strap"
   • If you miss this step, the system will exit to HOME Menu instead of installing boot9strap and you will need to open DS Download Play and start over from the beginning of this section
2. Press (A), then press START and SELECT at the same time to begin the process
3. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your console
   • You may have to force power off by holding the power button
   • If your console shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
   • If you see the Luma Configuration screen, power off your console and continue to the next section

Section VI - Luma3DS Configuration

1. Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration
   • Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
   • For the purpose of this guide, these settings will be left on default settings
   • If you boot to HOME Menu, follow this troubleshooting guide
2. Press (Start) to save and reboot

At this point, your console will boot to Luma3DS by default. Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware. On the next page, you will install useful homebrew applications to complete your setup.

Section VII - Restoring DS Download Play

1. Launch the Download Play application
2. Wait until you see the two buttons
   • Do not press either of the buttons
3. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
4. Select "Miscellaneous options"
5. Select "Switch the hb. title to the current app."
6. Press (B) to continue
7. Press (B) to return to the Rosalina main menu
8. Press (B) to exit the Rosalina menu
9. Press (Home), then close Download Play
10. Relaunch the Download Play application
11. Your device should load the Homebrew Launcher
12. Launch Frogtool from the list of homebrew
13. Select the "RESTORE patched DS Download Play" option
14. Once this operation has finished, read the screens and check if the process was successful
    • If there are any errors or missing files, correct the problem and try again
15. If the process was successful, tap the touch screen, then press START to exit

---

Continue to Finalizing Setup