3DS:System Transfer/Target is stock: Difference between revisions

Revision as of 08:50, 20 June 2022

Due to seedminer being the current exploit method, it is easier to perform a System Transfer first, before setting up custom firmware on the target console. Dumping the source console's movable.sed before performing the transfer means that seedminer can be bypassed entirely on the target console after.

If the target console does already has CFW, follow this guide instead.

What You Need

The game "Pokémon Picross" (free on eShop) installed on the source device
- You can scan this QR code using the Nintendo 3DS Camera for a direct link to the eShop app
- Your SD card must be inserted in your device to install Pokémon Picross
The latest release of GodMode9 (the GodMode9 .zip file)

Instructions

Section I - Prep Work

For the source console only, perform the following steps:
1. Power off your device
2. Insert your SD card into your computer
3. Copy GodMode9.firm from the GodMode9 .zip to the /luma/payloads/ folder on your SD card
4. Copy the gm9 folder from the GodMode9 .zip to the root of your SD card
5. Reinsert your SD card into your device
6. Power on your device

Section II - NAND Backup and movable.sed

Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9
Press (Home) to bring up the action menu
Select "Scripts..."
Select "GM9Megascript"
Select "Dump Options"
Select "System File Dump Options"
Select "Dump movable.sed"
Press (A) to confirm
Press (A) to continue
Press (B) twice to return to the main menu
Select "Backup Options"
Select "SysNAND Backup"
Press (A) to confirm
- This process will take some time
- If you get an error, make sure that you have at least 1.3GB of free spaec on your SD card
Press (A) to continue
Press (B) to return to the main menu
Select "Exit"
Press (A) to relock write permissions if prompted

Section IV - System Transfer

Perform the system transfer as usual
- If this is from an Old 3DS to a New 3DS, it is best to use "PC-Based Transfer", unless it is impossible to do. The "Wireless Transfer" option is very slow (taking about 2 hours to transfer 1GB)

The source console is finished. The following pages can be performed on the target console only.

Continue to Installing boot9strap (PicHaxx)

@@ Line 1: / Line 1: @@
-{{mbox|type=content|text=This page has been temporarily removed because it is outdated. Set up custom firmware on the target console and follow [[3DS:System Transfer/Target has CFW]] instead.}}
+{{Page WIP}}
+{{System version outdated article|console=ctr|sysversion=11.15.0-47|reason=''New update may have changed the need for seedminer.''}}
+{{ambox
+| text = TODO: Check that this actually makes sense? I might have missed some important steps...
+}}
+Due to seedminer being the current exploit method, it is easier to perform a System Transfer first, before setting up custom firmware on the target console. Dumping the source console's <code>movable.sed</code> before performing the transfer means that seedminer can be bypassed entirely on the target console after.
+If the target console does already has CFW, follow [[../Target has CFW|this guide]] instead.
+== What You Need ==
+<!--{{warning|text=Due to the Old 3DS and New 3DS using different SD cards, this guide will only work in the following situations:
+* Both consoles are Old models or New models
+* The Old 3DS is using a microSD card that can be easily inserted into the New 3DS
+* The New 3DS microSD card is the same size or larger than the Old 3DS SD card
+If the Old 3DS only has an SD card, and the New 3DS has a microSD card with less storage space, then you must delete games and other files on the Old 3DS to make it fit the microSD card storage space, or find a suitable microSD card.}}-->
+* The game "Pokémon Picross" (free on eShop) installed on the source device
+** You can scan [http://api.qrserver.com/v1/create-qr-code/?color=000000&bgcolor=FFFFFF&data=ESHOP://50010000037815&margin=0&qzone=1&size=400x400&ecc=L this QR code] using the Nintendo 3DS Camera for a direct link to the eShop app
+** Your SD card must be inserted in your device to install Pokémon Picross
+* The latest release of [https://github.com/d0k3/GodMode9/releases/latest GodMode9] (the GodMode9 <code>.zip</code> file)
+== Instructions ==
+=== Section I - Prep Work ===
+* For '''the source console only''', perform the following steps:
+*# Power off your device
+*# Insert your SD card into your computer
+*# Copy <code>GodMode9.firm</code> from the GodMode9 <code>.zip</code> to the <code>/luma/payloads/</code> folder on your SD card
+*# Copy the <code>gm9</code> folder from the GodMode9 <code>.zip</code> to the root of your SD card
+*# Reinsert your SD card into your device
+*# Power on your device
+=== Section II - NAND Backup and movable.sed ===
+# Press and hold (Start), and while holding (Start), power on your device. This will launch GodMode9
+# Press (Home) to bring up the action menu
+# Select "Scripts..."
+# Select "GM9Megascript"
+# Select "Dump Options"
+# Select "System File Dump Options"
+# Select "Dump movable.sed"
+# Press (A) to confirm
+# Press (A) to continue
+# Press (B) twice to return to the main menu
+# Select "Backup Options"
+# Select "SysNAND Backup"
+# Press (A) to confirm
+#* This process will take some time
+#* If you get an error, make sure that you have at least 1.3GB of free spaec on your SD card
+# Press (A) to continue
+# Press (B) to return to the main menu
+# Select "Exit"
+# Press (A) to relock write permissions if prompted
+=== Section IV - System Transfer ===
+{{ambox
+| text = TODO: Steps if someone could not use "PC-Based Transfer"
+}}
+# Perform the system transfer as usual
+#* If this is from an Old 3DS to a New 3DS, it is best to use "PC-Based Transfer", unless it is impossible to do. The "Wireless Transfer" option is very slow (taking about 2 hours to transfer 1GB)
+{{info|text='''The source console is finished.''' The following pages can be performed on '''the target console only'''.}}
+----
+{{ambox|text=TODO:
+*faketik steps
+*stuff about getting movable.sed from the SD card (in <code>/gm9/out/<serialnumber>_movable_##.sed</code>) format}}
+{{success|image=none|text='''Continue to [[3dsguide:installing-boot9strap-(pichaxx)|Installing boot9strap (PicHaxx)]]'''}}
+[[Category:Nintendo 3DS guides]]