3DS:Alternate Exploits/Installing boot9strap (2xrsa): Difference between revisions

← Older edit

VisualWikitext

@@ Line 1: / Line 1: @@
 ==Required Reading==
-{{System version outdated article|console=ctr|sysversion=2.1.0-4|reason=2xrsa does not work after 2.1.0.}}
+The 2xrsa method is compatible with system version 2.1.0-4.
-The 2xrsa method is compatible with system version 2.1.0.
 ==What You Need==
@@ Line 15: / Line 13: @@
 #Power off your device
 #Insert your SD card into your computer
-#Copy <code>boot.firm</code> and <code>boot.3dsx</code> from the Luma3DS <code>.zip</code> to the root of your SD card
+#Copy everything from the Luma3DS <code>.zip</code> to the root of your SD card
+#*The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
 #Create a folder named <code>boot9strap</code> on the root of your SD card
 #Copy <code>boot9strap.firm</code> and <code>boot9strap.firm.sha</code> from the boot9strap <code>.zip</code> to the <code>/boot9strap/</code> folder on your SD card
@@ Line 24: / Line 23: @@
 ===Section II - Launching SafeB9SInstaller===
 #Launch the browser and go to the following URL on your device
-#*<code>http://2xrsa.hacks.guide</code>
+#*<code>http://dukesrg.github.io/2xrsa.html?arm11.bin</code>
 #*If you are on a New 3DS, New 2DS, or Old 2DS and Wireless Communication is off, you can re-enable the wireless by removing the battery and unplugging the charger for several seconds then booting back up
 #*If you get the error "This service is not available in your region", use the System Settings to set your device's country to match the region of the system firmware
 #*If you cannot access wireless settings, note that the device will automatically connect to any network named <code>attwifi</code> with no password
-#*If you get another error, [[3dsguide:troubleshooting#a-browser-based-exploit-is-not-working|follow this troubleshooting guide]]
 #If the exploit was successful, you will have booted into SafeB9SInstaller
@@ Line 35: / Line 33: @@
 #Once it is complete, press (A) to reboot your device
 #Your device should have rebooted into the Luma3DS configuration menu
+#*Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
+#*For the purpose of this guide, these settings will be left on default settings
 #*If your device shuts down when you try to power it on, ensure that you have copied <code>boot.firm</code> from the Luma3DS <code>.zip</code> to the root of your SD card
 #Press (Start) to save and reboot
 #*If you get an error, just continue to the next page
-{{info|At this point, your console will boot to Luma3DS by default.
+{{Luma3DS is default}}
-*Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
-*On the next page, you will install useful homebrew applications to complete your setup.}}
 -----
 <span style="font-size:200%;">Continue to [[3dsguide:finalizing-setup|Finalizing Setup]]</span>
+[[Category:Nintendo 3DS guides]]