(remove mention of bb3 being on the main guide + reformat required reading) |
StarlitSkies (talk | contribs) (change Section II's horrendous labelling, remove the instruction that references output.zip) |
||
(6 intermediate revisions by 5 users not shown) | |||
Line 1: | Line 1: | ||
==Required Reading== | ==Required Reading== | ||
{{System version outdated article|console=ctr|sysversion=11.16.0-49}} | |||
[https://github.com/zoogie/Bannerbomb3 Bannerbomb3] is an exploit for the DSiWare Management Menu, compatible with the latest System version for all regions excluding the iQue 3DS since it doesn't have that menu. The main developer is [https://github.com/zoogie zoogie]. | |||
It's the main primary exploit used on the [https://3ds.hacks.guide/ main guide], unSAFE_MODE and BB3('''B'''anner'''b'''omb'''3''')+Fredtool both use it. It can be used to prepare the secondary exploits [https://github.com/zoogie/unSAFE_MODE unSAFE_MODE](you can find this on the [https://3ds.hacks.guide/installing-boot9strap-(usm) main guide]) or [https://github.com/zoogie/menuhax67 menuhax67], both made by the legend [https://github.com/zoogie zoogie]. This page covers preparing menuhax67 to access the Homebrew Launcher since accessing the Homebrew Launcher from Bannerbomb3 directly is not possible. On the next page you will find out how to access the Homebrew Launcher with menuhax67. Note that with a crashing DSiWare Management Menu, this method won't work. | |||
The instructions described here only work with EUR/USA/JPN/KOR, if you want to use Taiwan for some odd reason, no you don't want that, use the normal guide instead to install custom firmware. | |||
==What you need== | ==What you need== | ||
Line 11: | Line 13: | ||
*The latest version of [https://github.com/LumaTeam/Luma3DS/releases/latest Luma3DS] (the Luma3DS <code>.zip</code> file) | *The latest version of [https://github.com/LumaTeam/Luma3DS/releases/latest Luma3DS] (the Luma3DS <code>.zip</code> file) | ||
*The latest version of [https://github.com/zoogie/Bannerbomb3/releases/latest Bannerbomb3] (the Release <code>.zip</code> file) | *The latest version of [https://github.com/zoogie/Bannerbomb3/releases/latest Bannerbomb3] (the Release <code>.zip</code> file) | ||
*Your <code>movable.sed</code> file from completing [[ | *Your <code>movable.sed</code> file from completing [[3dsguide:seedminer|Seedminer]] | ||
*The latest version of [https://github.com/zoogie/menuhax67/releases/latest menuhax67] (the menuhax67 <code>.zip</code> file) | *The latest version of [https://github.com/zoogie/menuhax67/releases/latest menuhax67] (the menuhax67 <code>.zip</code> file) | ||
Line 28: | Line 30: | ||
====Section II, Part I - F00D43D5.bin generation==== | ====Section II, Part I - F00D43D5.bin generation==== | ||
# Open the [http://3dstools.nhnarwhal.com/#/bb3gen | # Open the [http://3dstools.nhnarwhal.com/#/bb3gen BannerBomb3 multitool Injector website] on your computer | ||
# Upload your movable.sed using the “Choose File” option | # Upload your movable.sed using the “Choose File” option | ||
# Click “Build and Download” | # Click “Build and Download” | ||
Line 39: | Line 41: | ||
#Create a folder named <code>Nintendo DSiWare</code> inside of the <code><ID1></code> | #Create a folder named <code>Nintendo DSiWare</code> inside of the <code><ID1></code> | ||
#*If you already had the folder ''and'' there are any existing DSiWare backup files (<code><8-character-id>.bin</code>) inside, copy them to your PC and then remove them from your SD card | #*If you already had the folder ''and'' there are any existing DSiWare backup files (<code><8-character-id>.bin</code>) inside, copy them to your PC and then remove them from your SD card | ||
#Copy the <code>F00D43D5.bin</code> file from <code>DSIWARE_EXPLOIT.zip</code> to the <code>Nintendo DSiWare</code> | #Copy the <code>F00D43D5.bin</code> file from <code>DSIWARE_EXPLOIT.zip</code> to the <code>Nintendo DSiWare folder</code> | ||
===Section III - Bannerbomb3=== | ===Section III - Bannerbomb3=== |
Revision as of 21:59, 6 April 2023
Required Reading
This article may be outdated due to a new Nintendo 3DS system firmware release. It was written for system version 11.16.0-49, but 11.17.0-50 is the latest. |
Bannerbomb3 is an exploit for the DSiWare Management Menu, compatible with the latest System version for all regions excluding the iQue 3DS since it doesn't have that menu. The main developer is zoogie.
It's the main primary exploit used on the main guide, unSAFE_MODE and BB3(Bannerbomb3)+Fredtool both use it. It can be used to prepare the secondary exploits unSAFE_MODE(you can find this on the main guide) or menuhax67, both made by the legend zoogie. This page covers preparing menuhax67 to access the Homebrew Launcher since accessing the Homebrew Launcher from Bannerbomb3 directly is not possible. On the next page you will find out how to access the Homebrew Launcher with menuhax67. Note that with a crashing DSiWare Management Menu, this method won't work.
The instructions described here only work with EUR/USA/JPN/KOR, if you want to use Taiwan for some odd reason, no you don't want that, use the normal guide instead to install custom firmware.
What you need
- The latest version of Luma3DS (the Luma3DS
.zip
file) - The latest version of Bannerbomb3 (the Release
.zip
file) - Your
movable.sed
file from completing Seedminer - The latest version of menuhax67 (the menuhax67
.zip
file)
Instructions
Section I - Prep Work
- Insert the SD card of your target 3DS in your computer
- Copy
boot.firm
andboot.3dsx
from the Luma3DS.zip
to the root of your SD card- The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
- Copy the
Launcher.dat
for your region/version from the Release.zip
to the root of your SD card - Copy the bb3.bin from the Release
.zip
to the root of your SD card
Section II - Bannerbomb3 Prep
Section II, Part I - F00D43D5.bin generation
- Open the BannerBomb3 multitool Injector website on your computer
- Upload your movable.sed using the “Choose File” option
- Click “Build and Download”
Section II, Part II - F00D43D5.bin placement
- Navigate to
Nintendo 3DS
-><ID0>
-><ID1>
on your SD card- The
<ID0>
will be the same one that you used in Seedminer - The
<ID1>
is a 32 character long folder inside of the<ID0>
- The
- Create a folder named
Nintendo DSiWare
inside of the<ID1>
- If you already had the folder and there are any existing DSiWare backup files (
<8-character-id>.bin
) inside, copy them to your PC and then remove them from your SD card
- If you already had the folder and there are any existing DSiWare backup files (
- Copy the
F00D43D5.bin
file fromDSIWARE_EXPLOIT.zip
to theNintendo DSiWare folder
Section III - Bannerbomb3
- Reinsert your SD card into your device
- Power on your device
- Launch System Settings on your device
- Navigate to
Data Management
->DSiWare
->SD Card
- Select
Install *HAX
Continue to menuhax67