3DS:Alternate Exploits/Installing boot9strap (Stealth Luma3DS): Difference between revisions

Revision as of 01:55, 24 March 2023

Required Reading

This method only applies to users that have purchased a device from Ancient Moon Game Store (on Amazon or Aliexpress), which are sold with a stripped-down custom firmware on their devices.

What You Need

The latest release of Luma3DS (the Luma3DS .zip file)
config.bin (direct download)
Original 3DS/2DS consoles: This native.firm (direct download)
NEW 3DS/2DS consoles: This native.firm (direct download)

Instructions

Section I - Prep Work

Power off your device
Insert your SD card into your computer
Copy boot.firm and boot.3dsx from the Luma3DS .zip to the root of your SD card
- The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
Create a folder named luma on the root of your SD card, if it does not already exist
Copy native.firm to the /luma/ folder on your SD card
Copy config.bin to the /luma/ folder on your SD card
Reinsert your SD card into your device

Section II - Installing boot9strap

Power on your device
If the exploit was successful, you will have booted into SafeB9SInstaller, then immediately have booted into the Luma3DS configuration menu
- Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
- For the purpose of this guide, these settings will be left on default settings
- If your device shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
- If your device booted to the HOME menu without showing SafeB9SInstaller, download this custom bb3.bin, copy it to the root of your SD card, and continue to section II of BannerBomb3
Press (Start) to save and reboot
- If you get an error, just continue to the next page

At this point, your console will boot to Luma3DS by default.

Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
On the next page, you will install useful homebrew applications to complete your setup.

Section II - Removing files

Power off your device
Insert your SD card into your computer
Delete native.firm from the /luma/ folder on your SD card
Navigate to Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare on your SD card
Delete F00D43D5.bin from your Nintendo DSiWare folder and from your computer. This file will not be needed anymore

Continue to Finalizing Setup

@@ Line 1: / Line 1: @@
 ==Required Reading==
-This method applies to devices that were purchased from certain sellers on Amazon or AliExpress, usually "Ancient Moon Game Store". These devices come with a specially modified version of Luma3DS to hide all configuration and features. During attempts to set up homebrew, this causes problems, usually when attempting to run nimdsphax. This guide explains how to replace it with a standard boot9strap install. If you were sent this guide in the [https://discord.com/invite/MWxPgEp Nintendo Homebrew] Discord server with proper intent, do '''not''' follow any previous CFW installation method you were following (Skaterhax, SSLoth-Browser, etc.) and only remain on this guide.
+This method only applies to users that have purchased a device from Ancient Moon Game Store (on Amazon or Aliexpress), which are sold with a stripped-down custom firmware on their devices.
 ==What You Need==
 *The latest release of [https://github.com/LumaTeam/Luma3DS/releases/latest Luma3DS] (the Luma3DS <code>.zip</code> file)
-*The latest release of [https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip boot9strap] (direct download)
 *[[Special:DownloadWithFilename/File:AncientMoon-Luma3DS-Config.bin/config.bin|config.bin]] (direct download)
 *Original 3DS/2DS consoles: This [[Special:DownloadWithFilename/File:AncientMoob-SB9SI-Old3DS-native.bin/native.firm|native.firm]] (direct download)
 *NEW 3DS/2DS consoles: This [[Special:DownloadWithFilename/File:AncientMoob-SB9SI-New3DS-native.bin/native.firm|native.firm]] (direct download)
-{{WinRAR notice}}
 ==Instructions==
@@ Line 17: / Line 15: @@
 #Copy <code>boot.firm</code> and <code>boot.3dsx</code> from the Luma3DS <code>.zip</code> to the root of your SD card
 #*The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
-#Create a folder named <code>boot9strap</code> on the root of your SD card
-#Copy <code>boot9strap.firm</code> and <code>boot9strap.firm.sha</code> from the boot9strap <code>.zip</code> to the <code>/boot9strap/</code> folder on your SD card
 #Create a folder named <code>luma</code> on the root of your SD card, if it does not already exist
-#*If this folder already exists and there is a file named <code>config.bin</code> inside it, delete this file
 #Copy <code>native.firm</code> to the <code>/luma/</code> folder on your SD card
-#Copy the <code>config.bin</code> to the <code>/luma/</code> folder on your SD card
+#Copy <code>config.bin</code> to the <code>/luma/</code> folder on your SD card
 #Reinsert your SD card into your device
@@ Line 32: / Line 27: @@
 #*For the purpose of this guide, these settings will be left on default settings
 #*If your device shuts down when you try to power it on, ensure that you have copied <code>boot.firm</code> from the Luma3DS <code>.zip</code> to the root of your SD card
-#*If your device booted to the HOME menu without showing SafeB9SInstaller, proceed to [[3dsguide:installing-boot9strap-(mset9)|Installing boot9strap (MSET9)]].
+#*If your device booted to the HOME menu without showing SafeB9SInstaller, download [https://github.com/lifehackerhansol/Bannerbomb3/raw/disable-cfw-check/bb3_multitool/bb3.bin this custom bb3.bin], copy it to the root of your SD card, and continue to section II of [[3dsguide:bannerbomb3|BannerBomb3]]
 #Press (Start) to save and reboot
-#*If you get an error, just continue to the next section
+#*If you get an error, just continue to the next page
-{{Luma3DS is default}}
+{{info|At this point, your console will boot to Luma3DS by default.
+*Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
-===Section III - Removing files===
+*On the next page, you will install useful homebrew applications to complete your setup.}}
-{{info|This section is '''mandatory''' and should not be skipped, otherwise, the console may crash or throw an error the next time it turns on.}}
+===Section II - Removing files===
 #Power off your device
 #Insert your SD card into your computer
 #Delete <code>native.firm</code> from the <code>/luma/</code> folder on your SD card
+#Navigate to <code>Nintendo 3DS -> <ID0> -> <ID1> -> Nintendo DSiWare</code> on your SD card
+#Delete <code>F00D43D5.bin</code> from your Nintendo DSiWare folder and from your computer. This file will not be needed anymore
 -----