3DS:Alternate Exploits/Installing boot9strap (Frogtool): Difference between revisions

3DS:Alternate Exploits/Installing boot9strap (Frogtool) (view source)

Revision as of 17:32, 5 December 2022

86 bytes added , 1 year ago

m

align with upstream Fredtool

Lifehackerhansol

Approver, Staff, Administrators, Translation Reviewer

256

edits

@@ Line 71: / Line 71: @@
 #*You may have to force power off by holding the power button
 #*If your device shuts down when you try to power it on, ensure that you have copied <code>boot.firm</code> from the Luma3DS <code>.zip</code> to the root of your SD card
-#*If you see the Luma Configuration screen, press (Start) to reboot, then continue with the guide
+#*If you see the Luma Configuration screen, power off your device and continue to the next section
-===Section V - Luma3DS Verification===
+===Section V - Luma3DS Configuration===
+#Press and hold (Select), and while holding (Select), power on your device. This will launch Luma3DS configuration
-#Power off your device
+#*Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
-#Insert your SD card into your computer
+#*For the purpose of this guide, these settings will be left on default settings
-#Verify that a <code>luma</code> folder exists and that <code>config.ini</code> is inside of it
+#*If you boot to HOME Menu, [https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md follow this troubleshooting guide]
-#*The existence of these folders and files confirms that Luma3DS is installed
+#Press (Start) to save and reboot
-#* If you do not see the <code>luma</code> folder or <code>config.ini</code>, [https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md follow this troubleshooting guide]
 {{info|At this point, your console will boot to Luma3DS by default.