3DS:Alternate Exploits/Homebrew Launcher (steelhax): Difference between revisions

Revision as of 08:19, 31 August 2022

Required Reading

Steelhax is a savegame exploit for Steel Diver: Sub Wars. It is compatible with versions 1.0.0 through 11.15.0 on EUR, USA, or JPN region devices.

This method of using Seedminer for further exploitation uses your movable.sed file to write a custom save file for Steel Diver: Sub Wars, which can then be used with universal-otherapp to run SafeB9SInstaller.

If you already have Steel Diver: Sub Wars, this process will overwrite your game's save file!

What You Need

The free eShop game "Steel Diver: Sub Wars"
Your movable.sed file from completing Seedminer
The latest release of Steelhax (direct download)
The latest release of SafeB9SInstaller (direct download)
The latest release of boot9strap (direct download)
The latest release of Luma3DS (the Luma3DS .zip file)
The latest release of universal-otherapp

Instructions

Section I - Prep Work

Power off your device
Insert your SD card into your computer
Copy boot.firm and boot.3dsx from the Luma3DS .zip to the root of your SD card
Create a folder named boot9strap on the root of your SD card
Copy boot9strap.firm and boot9strap.firm.sha from the boot9strap .zip to the /boot9strap/ folder on your SD card
Copy SafeB9SInstaller.bin from the SafeB9SInstaller .zip to the root of your SD card
Copy the steelhax folder from the Steelhax-release.zip to the root of your SD card
Copy otherapp.bin to the /steelhax/ folder on your SD card and rename it to payload.bin
Reinsert your SD card into your device
Power on your device

Section II - Steelminer

Launch "Steel Diver: Sub Wars" once and select a Mii to initialize your save file
- Decline the game update when prompted
- If you have already updated the game, use the Data Management menu of the System Settings to delete the update
Exit "Steel Diver: Sub Wars"
Power off your device
Insert your SD card into your computer
Open the Steelminer Injector website on your computer
Select your movable.sed file
Select "Start!"
Wait for the process to complete
Navigate to Nintendo 3DS -> <ID0> -> <32-character-id> -> title -> 00040000 -> <8-character-region> -> data on your SD card
- EUR Region: 000d7e00
- JPN Region: 000d7c00
- USA Region: 000d7d00
Copy the new downloaded save file to the data folder on your SD card
- Overwrite the old save file when prompted
Reinsert your SD card into your device
Power on your device
Launch "Steel Diver: Sub Wars"
If the exploit was successful, your device will have booted into SafeB9SInstaller

Section IV - Installing boot9strap

When prompted, input the key combo given on the top screen to install boot9strap
Once it is complete, press (A) to reboot your device
Your device should have rebooted into the Luma3DS configuration menu
- If your device shuts down when you try to power it on, ensure that you have copied boot.firm from the Luma3DS .zip to the root of your SD card
Press (Start) to save and reboot
- If you get an error, just continue to the next page

At this point, your console will boot to Luma3DS by default.

Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
On the next page, you will install useful homebrew applications to complete your setup.

@@ Line 1: / Line 1: @@
-{{System version outdated article|console=ctr|sysversion=11.17.0-50|reason=The otherapp payload may have been broken in the latest update.}}
 ==Required Reading==
-This method of using Seedminer for further exploitation uses your <code>movable.sed</code> file to write a custom save file for Steel Diver: Sub Wars, which can then be used to launch the Homebrew Launcher.
+Steelhax is a savegame exploit for Steel Diver: Sub Wars. It is compatible with versions 1.0.0 through 11.15.0 on EUR, USA, or JPN region devices.
-{{warning|text=This process requires your console-specific <code>movable.sed</code> file. If you don't have it yet, you can get it by following [[3DS:Seedminer|Seedminer]]. (Don't continue to BannerBomb3.)}}
+This method of using Seedminer for further exploitation uses your <code>movable.sed</code> file to write a custom save file for Steel Diver: Sub Wars, which can then be used with universal-otherapp to run SafeB9SInstaller.
 {{warning|text=If you already have Steel Diver: Sub Wars, this process will overwrite your game's save file!}}
 ==What You Need==
-* The game "Steel Diver: Sub Wars" (no longer available for download on eShop) installed on your device
+*The free eShop game "Steel Diver: Sub Wars"
-*Your <code>movable.sed</code> file from completing [[3DS:Seedminer|Seedminer]]
+*Your <code>movable.sed</code> file from completing [[3dsguide:seedminer|Seedminer]]
 * The latest release of [https://github.com/MechanicalDragon0687/vegaroxas.github.io/releases/download/1.0/steelhax-release.zip Steelhax] (direct download)
+*The latest release of [https://github.com/d0k3/SafeB9SInstaller/releases/download/v0.0.7/SafeB9SInstaller-20170605-122940.zip SafeB9SInstaller] (direct download)
+*The latest release of [https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip boot9strap] (direct download)
 *The latest release of [https://github.com/LumaTeam/Luma3DS/releases/latest Luma3DS] (the Luma3DS <code>.zip</code> file)
-*[[Media:Otherapps.zip|otherapps.zip]]
+*The latest release of [https://github.com/TuxSH/universal-otherapp/releases/latest universal-otherapp]
 ==Instructions==
-===Section I - Prep Work===
+===Section I - Prep Work ===
 #Power off your device
 #Insert your SD card into your computer
 #Copy <code>boot.firm</code> and <code>boot.3dsx</code> from the Luma3DS <code>.zip</code> to the root of your SD card
-#*The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+#Create a folder named <code>boot9strap</code> on the root of your SD card
+#Copy <code>boot9strap.firm</code> and <code>boot9strap.firm.sha</code> from the boot9strap <code>.zip</code> to the <code>/boot9strap/</code> folder on your SD card
+#Copy <code>SafeB9SInstaller.bin</code> from the SafeB9SInstaller <code>.zip</code> to the root of your SD card
 #Copy the <code>steelhax</code> folder from the <code>Steelhax-release.zip</code> to the root of your SD card
-#Copy the otherapp payload for your region/version/model from the otherapps <code>.zip</code> file to the <code>/steelhax/</code> folder and rename it to <code>payload.bin</code>
+#Copy <code>otherapp.bin</code> to the <code>/steelhax/</code> folder on your SD card and rename it to <code>payload.bin</code>
-# Reinsert your SD card into your device
+#Reinsert your SD card into your device
 #Power on your device
 ===Section II - Steelminer===
 #Launch "Steel Diver: Sub Wars" once and select a Mii to initialize your save file
-#*Decline the game update when prompted
+#* Decline the game update when prompted
-#* If you have already updated the game, use the Data Management menu of the System Settings to delete the update
+#*If you have already updated the game, use the Data Management menu of the System Settings to delete the update
-#Exit "Steel Diver: Sub Wars"
+# Exit "Steel Diver: Sub Wars"
 #Power off your device
 #Insert your SD card into your computer
-#Open [https://3dstools.nhnarwhal.com/#/steelhax the SteelHax Save Tool website] on your computer
+#Open [https://3ds.nhnarwhal.com/3dstools/steelhax.php the Steelminer Injector website] on your computer
 #Select your <code>movable.sed</code> file
-#Select your region based on your console
+#Select "Start!"
-#Select "Build and Download"
+#Wait for the process to complete
-# Wait for the process to complete
 #Navigate to <code>Nintendo 3DS</code> -> <code><ID0></code> -> <code><32-character-id></code> -> <code>title</code> -> <code>00040000</code> -> <code><8-character-region></code> -> <code>data</code> on your SD card
 #*'''EUR Region''': <code>000d7e00</code>
@@ Line 45: / Line 47: @@
 #Copy the new downloaded save file to the <code>data</code> folder on your SD card
 #*Overwrite the old save file when prompted
-# Reinsert your SD card into your device
+#Reinsert your SD card into your device
-# Power on your device
+#Power on your device
 #Launch "Steel Diver: Sub Wars"
-#If the exploit was successful, your device will have loaded the Homebrew Launcher
+#If the exploit was successful, your device will have booted into SafeB9SInstaller
+===Section IV - Installing boot9strap===
+#When prompted, input the key combo given on the top screen to install boot9strap
+# Once it is complete, press (A) to reboot your device
+#Your device should have rebooted into the Luma3DS configuration menu
+#*If your device shuts down when you try to power it on, ensure that you have copied <code>boot.firm</code> from the Luma3DS <code>.zip</code> to the root of your SD card
+#Press (Start) to save and reboot
+#*If you get an error, just continue to the next page
+At this point, your console will boot to Luma3DS by default.
+*Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+*On the next page, you will install useful homebrew applications to complete your setup.
 -----
-<span style="font-size:200%;">Continue to [[3DS:Alternate Exploits/Installing boot9strap (nimdsphax)|Installing boot9strap (nimdsphax)]]</span>
+==Continue to [[3dsguide:finalizing-setup|Finalizing Setup]]==
-[[Category:Nintendo 3DS guides]]