|
|
| (30 intermediate revisions by 8 users not shown) |
| Line 1: |
Line 1: |
| {{shortcut|3DS:STREAM}} | | {{Page WIP}} |
| {{warning|text=This guide cannot be used to stream DS games, DSiWare, and GBA games. You will need a hardware capture card to do that.}} | | {{Warning|text=This guide can't be used to stream DS games and DSiWare. You will need a capture card to do that.}} |
| {{critical|text='''This guide only works on New 3DS models.'''
| | This page will show you how to stream your 3DS' screen to your computer. |
| <br>If you have a Old 3DS model, you can use [[/HzMod|HzMod]] instead; however, keep in mind that Old 3DS models have very weak hardware, and extremely low framerates are unavoidable. It is generally not practical to stream with an Old 3DS.}}
| |
| | |
| This page will show you how to stream your New 3DS console's screens to your computer over WiFi. However, note the following things: | |
| | |
| * Your console and your computer need to be on the same network.
| |
| * Streaming audio over WiFi currently isn't possible - you will need to use an AUX cable and a device with Line In at the same time to receive audio.
| |
| * If you have a poor connection, you may not get the best results. The receiving computer should be connected to the network via Ethernet or a 5GHz WiFi connection.
| |
| | |
| {{info|text=Significantly improved performance is available through [https://gbatemp.net/threads/rel-improved-hopefully-ntr-streamer-for-n3ds-xl-ll.644726/ ntr-hr], a fork of the original NTR. However, it is slightly more unstable and still actively being developed.<br>
| |
| If you do not consider that a problem, then to use ntr-hr, download <code>BootNTRSelector-PabloMK7-Banner.cia</code> from the {{GitHub|xzn/ntr-hr/releases|ntr-hr releases page}} and use it in place of the BootNTR Selector <code>.cia</code> that would have been downloaded below.}}
| |
| | |
| == Finding your Console's IP ==
| |
| You'll need to know the local IP address of your 3DS later, so it's a good idea to find it now.
| |
| {{3DS:Check local IP address}}
| |
| | |
| == Streaming with NTR == | | == Streaming with NTR == |
| <tabber>
| |
| |-|Windows - Snickerstream=
| |
| === What You Need ===
| |
| * Your console's IP from the first section
| |
| * The latest release of {{GitHub|RattletraPM/Snickerstream/releases/latest|Snickerstream}}
| |
| * The latest release of {{GitHub|LumaTeam/Luma3DS/releases/latest|Luma3DS}}
| |
| * The latest release of {{GitHub|Nanquitas/BootNTR/releases/latest|BootNTR Selector}}
| |
| * {{GitHub|lifehackerhansol/FBI/releases/latest|FBI}} installed on your console
| |
|
| |
| === Section I: Prep Work ===
| |
| #Ensure that your console and your computer are on the same network
| |
| # Download and extract the latest Snickerstream <code>.zip</code> file
| |
| # Download the latest Luma3DS <code>boot.firm</code> file
| |
| # Download the latest BootNTR Selector <code>.cia</code> file
| |
| # Power off your console
| |
| # Take the SD card out of your console and put it into your computer
| |
| # Replace the <code>boot.firm</code> file on the root of your SD card with the one you just downloaded
| |
| # Copy the BootNTR selector <code>.cia</code> file to your SD card
| |
| #* You may put this file where you can easily access it
| |
| # Put your SD card back into your console
| |
|
| |
| === Section II: Installing CIAs ===
| |
| # Power on your console
| |
| #* If you are prompted with a Luma3DS configuration screen, just press {{B|START}}
| |
| # Open FBI
| |
| # Press {{B|A}} on <code>SD</code> at the top of your bottom screen
| |
| # Find the BootNTR Selector <code>.cia</code> file that you copied, press A on it and select <code>Install and delete CIA</code>
| |
| # Press {{B|START}} to exit FBI
| |
|
| |
| ===Section III: Streaming===
| |
| # Open the Snickerstream <code>.exe</code> file from where you extracted it
| |
| # On your console, open the gift that appeared on your home menu and launch BootNTR Selector
| |
| #* If you're prompted with 3 buttons on your bottom screen, tap "Use default"
| |
| #* If you're prompted to choose an NTR version, choose 3.6
| |
| #* Your console's screen should flash some colors, meaning that it's ready for streaming
| |
| # Input your console's IP from the first section into the IP box in the Snickerstream window
| |
| #* You may also {{GitHub|RattletraPM/Snickerstream/wiki/Settings-101|adjust your settings}} to your liking if you wish
| |
| # Click <code>Connect!</code> in the Snickerstream window
| |
| #* Your console's screens should now be streamed to your computer
| |
|
| |
| |-|macOS - cuteNTR-OSX=
| |
| === What You Need ===
| |
| * Your console's IP from the first section
| |
| * The latest release of {{GitHub|EBLeifEricson/cuteNTR-OSX/releases/tag/0.3.2|cuteNTR-OSX}}
| |
| * The latest release of {{GitHub|LumaTeam/Luma3DS/releases/latest|Luma3DS}}
| |
| * The latest release of {{GitHub|Nanquitas/BootNTR/releases/latest|BootNTR Selector}}
| |
| * {{GitHub|lifehackerhansol/FBI/releases/latest|FBI}} installed on your console
| |
|
| |
| === Section I: Prep Work ===
| |
| #Ensure that your console and your computer are on the same network
| |
| # Download <code>cuteNTR-0.3.2.dmg</code>
| |
| # Download the latest Luma3DS <code>boot.firm</code> file
| |
| # Download the latest BootNTR Selector <code>.cia</code> file
| |
| # Power off your console
| |
| # Take the SD card out of your console and put it into your computer
| |
| # Replace the <code>boot.firm</code> file on the root of your SD card with the one you just downloaded
| |
| # Copy the BootNTR selector <code>.cia</code> file to your SD card
| |
| #* You may put this file where you can easily access it
| |
| # Put your SD card back into your console
| |
|
| |
| === Section II: Installing CIAs ===
| |
| # Power on your console
| |
| #* If you are prompted with a Luma3DS configuration screen, just press {{B|START}}
| |
| # Open FBI
| |
| # Press {{B|A}} on <code>SD</code> at the top of your bottom screen
| |
| # Find the BootNTR Selector <code>.cia</code> file that you copied, press A on it and select <code>Install and delete CIA</code>
| |
| # Press {{B|START}} to exit FBI
| |
|
| |
| === Section III: Streaming ===
| |
| # On your console, open the gift that appeared on your home menu and launch BootNTR Selector
| |
| #* If you're prompted with 3 buttons on your bottom screen, tap "Use default"
| |
| #* If you're prompted to choose an NTR version, choose 3.6
| |
| #* Your console's screen should flash some colors, meaning that it's ready for streaming
| |
| # Open the cuteNTR <code>.dmg</code>, and copy the app to the Applications folder
| |
| #* You may be prompted to enter the admin password
| |
| # Right click on the app and click 'open'
| |
| #* You may be prompted to enter the admin password
| |
| # Input your console's IP from the first section into the IP box in the cuteNTR window
| |
| # Click <code>Connect!</code> in the cuteNTR window
| |
| #* Your console's screens should now be streamed to your computer. The top and bottom screens will be 2 different windows. If you cannot find them, on the bottom of the screen where the dock is located, right click the cuteNTR icon and select "Show All Windows"
| |
|
| |
| |-|Debian Linux - cuteNTR=
| |
| === What You Need ===
| |
| * Your console's IP from the first section
| |
| * sudo
| |
| * The latest release of {{GitHub|LumaTeam/Luma3DS/releases/latest|Luma3DS}}
| |
| * The latest release of {{GitHub|Nanquitas/BootNTR/releases/latest|BootNTR Selector}}
| |
| * {{GitHub|lifehackerhansol/FBI/releases/latest|FBI}} installed on your console
| |
|
| |
| === Section I: Prep Work ===
| |
| # Ensure that your console and your computer are on the same network
| |
| # Download the latest Luma3DS <code>boot.firm</code> file
| |
| # Download the latest BootNTR Selector <code>.cia</code> file
| |
| # Power off your console
| |
| # Take the SD card out of your console and put it into your computer
| |
| # Replace the <code>boot.firm</code> file on the root of your SD card with the one you just downloaded
| |
| # Copy the BootNTR selector <code>.cia</code> file to your SD card
| |
| #* You may put this file where you can easily access it
| |
| # Put your SD card back into your console
| |
|
| |
| === Section II: installing cuteNTR ===
| |
| This section will add a [https://askubuntu.com/a/4990 PPA] to your sources in order to install cuteNTR. Proceed on your own risk.
| |
| # Open the terminal
| |
| # Run <code>sudo add-apt-repository ppa:joenosie/3ds</code> to add the PPA to your sources
| |
| # Run <code>sudo apt update && sudo apt upgrade</code> to update your setup
| |
| # Run <code>sudo apt install cutentr</code> to install cuteNTR
| |
|
| |
| ===Section III: Installing CIAs ===
| |
| # Power on your console
| |
| #* If you are prompted with a Luma3DS configuration screen, just press {{B|START}}
| |
| # Open FBI
| |
| # Press {{B|A}} on <code>SD</code> at the top of your bottom screen
| |
| # Find the BootNTR Selector <code>.cia</code> file that you copied, press A on it and select <code>Install and delete CIA</code>
| |
| # Press {{B|START}} to exit FBI
| |
|
| |
| === Section IV: Streaming ===
| |
| # Launch cuteNTR, either from your window manager or with <code>cutentr</code> in the terminal
| |
| # On your console, open the gift that appeared on your home menu and launch BootNTR Selector
| |
| #* If you're prompted with 3 buttons on your bottom screen, tap "Use default"
| |
| #* If you're prompted to choose an NTR version, choose 3.6
| |
| #* Your console's screen should flash some colors, meaning that it's ready for streaming
| |
| # Input your console's IP from the first section into the IP box next to the <code>Stream</code> button
| |
| # Click <code>Stream</code> in the cuteNTR window
| |
| #* Your console's screens should now be streamed to your computer
| |
|
| |
| |-|Arch Linux - cuteNTR=
| |
| === What You Need ===
| |
| * Your console's IP from the first section
| |
| * sudo
| |
| * The latest release of {{GitHub|LumaTeam/Luma3DS/releases/latest|Luma3DS}}
| |
| * The latest release of {{GitHub|Nanquitas/BootNTR/releases/latest|BootNTR Selector}}
| |
| * {{GitHub|lifehackerhansol/FBI/releases/latest|FBI}} installed on your console
| |
|
| |
| === Section I: Prep Work===
| |
| # Ensure that your console and your computer are on the same network
| |
| # Download the latest Luma3DS <code>boot.firm</code> file
| |
| # Download the latest BootNTR Selector <code>.cia</code> file
| |
| # Power off your console
| |
| # Take the SD card out of your console and put it into your computer
| |
| # Replace the <code>boot.firm</code> file on the root of your SD card with the one you just downloaded
| |
| # Copy the BootNTR selector <code>.cia</code> file to your SD card
| |
| #* You may put this file where you can easily access it
| |
| # Put your SD card back into your console
| |
|
| |
| === Section II: Installing cuteNTR===
| |
| This is a small tutorial for installing the popular AUR helper {{GitHub|Jguer/yay|yay}} and installing cuteNTR with it. If you already have a working AUR helper, or know how to install AUR packages in general, you can download and make <code>cutentr-git</code> yourself, then continue with the next section.
| |
|
| |
| # Open the terminal
| |
| # Run <code>sudo pacman -S --needed git base-devel</code> to make sure that you have the base-devel package group and git installed
| |
| #* Confirm your password if prompted
| |
| # Run <code>git clone https://aur.archlinux.org/yay.git</code>
| |
| # Run <code>cd yay</code>
| |
| # Run <code>makepkg -si</code> to install yay
| |
| #* Confirm your password if prompted
| |
| # Run <code>yay -S cutentr-git</code> to install cuteNTR
| |
| #* Confirm your password if prompted
| |
|
| |
| === Section III: Installing CIAs ===
| |
| # Power on your console
| |
| #* If you are prompted with a Luma3DS configuration screen, just press {{B|START}}
| |
| # Open FBI
| |
| # Press {{B|A}} on <code>SD</code> at the top of your bottom screen
| |
| # Find the BootNTR Selector <code>.cia</code> file that you copied, press A on it and select <code>Install and delete CIA</code>
| |
| # Press {{B|START}} to exit FBI
| |
|
| |
| === Section IV: Streaming ===
| |
| # Launch cuteNTR, either from your window manager or with <code>cutentr</code> in the terminal
| |
| # On your console, open the gift that appeared on your home menu and launch BootNTR Selector
| |
| #* If you're prompted with 3 buttons on your bottom screen, tap "Use default"
| |
| #* If you're prompted to choose an NTR version, choose 3.6
| |
| #* Your console's screen should flash some colors, meaning that it's ready for streaming
| |
| # Input your console's IP from the first section into the IP box next to the <code>Stream</code> button
| |
| # Click <code>Stream</code> in the cuteNTR window
| |
| #* Your console's screens should now be streamed to your computer
| |
|
| |
| |-|Other Linux - cuteNTR=
| |
| === What You Need ===
| |
| * Your console's IP from the first section
| |
| * The latest release of [https://flatpak.org/setup/ flatpak] installed on your computer for your operating system
| |
| * The latest release of {{GitHub|LumaTeam/Luma3DS/releases/latest|Luma3DS}}
| |
| * The latest release of {{GitHub|Nanquitas/BootNTR/releases/latest|BootNTR Selector}}
| |
| * {{GitHub|lifehackerhansol/FBI/releases/latest|FBI}} installed on your console
| |
|
| |
| === Section I: Prep Work ===
| |
| # Ensure that your console and your computer are on the same network
| |
| # Download the latest Luma3DS <code>boot.firm</code> file
| |
| # Download the latest BootNTR Selector <code>.cia</code> file
| |
| # Power off your console
| |
| # Take the SD card out of your console and put it into your computer
| |
| # Replace the <code>boot.firm</code> file on the root of your SD card with the one you just downloaded
| |
| # Copy the BootNTR selector <code>.cia</code> file to your SD card
| |
| #* You may put this file where you can easily access it
| |
| # Put your SD card back into your console
| |
|
| |
| === Section II: Installing cuteNTR ===
| |
| # Open the terminal
| |
| # Run <code>mkdir cuteNTR && cd cuteNTR</code> to make a new directory and go into it
| |
| # Run <code>wget https://gitlab.com/BoltsJ/cuteNTR/uploads/da6b5bafbab68b45cc9bee0ae590a3ca/com.gitlab.BoltsJ.cuteNTR.flatpak</code>
| |
| # Run <code>flatpak install com.gitlab.BoltsJ.cuteNTR.flatpak</code> to install cuteNTR
| |
| # Confirm your password and all other prompts with yes
| |
| # Run <code>cd .. && rm -r cuteNTR</code> to delete the directory
| |
|
| |
| === Section III: Installing CIAs ===
| |
| # Power on your console
| |
| #* If you are prompted with a Luma3DS configuration screen, just press {{B|START}}
| |
| # Open FBI
| |
| # Press {{B|A}} on <code>SD</code> at the top of your bottom screen
| |
| # Find the BootNTR Selector <code>.cia</code> file that you copied, press A on it and select <code>Install and delete CIA</code>
| |
| # Press {{B|START}} to exit FBI
| |
|
| |
| === Section IV: Streaming ===
| |
| # Launch cuteNTR by running <code>flatpak run com.gitlab.BoltsJ.cuteNTR</code>
| |
| # On your console, open the gift that appeared on your home menu and launch BootNTR Selector
| |
| #* If you're prompted with 3 buttons on your bottom screen, tap "Use default"
| |
| #* If you're prompted to choose an NTR version, choose 3.6
| |
| #* Your console's screen should flash some colors, meaning that it's ready for streaming
| |
| # Input your console's IP from the first section into the IP box next to the <code>Stream</code> button
| |
| # Click <code>Stream</code> in the cuteNTR window
| |
| #* Your console's screens should now be streamed to your computer
| |
|
| |
| </tabber>
| |
|
| |
| == Using Line In to Receive Audio ==
| |
|
| |
| === What You Need ===
| |
|
| |
| * A 3.5mm to 3.5mm audio cable
| |
| * An audio in (line in or microphone in) port on your computer
| |
| ** Some computers have a single "headphone" port that can be used for both audio output and input. To use one of these, you will need a Y splitter cable
| |
|
| |
| === How to use ===
| |
|
| |
| # Connect your 3DS to your computer's audio input port with a 3.5mm to 3.5mm audio cable
| |
| # Pipe the audio from your audio input port into the software you intend to use
| |
| #* The exact steps will depend on the software you're using
| |
| #* If you are recording or streaming your game using [https://obsproject.com/ OBS], add a new Audio Input Capture
| |
| #* If you are streaming your game via a service such as Discord, you will need to use software such as [https://vb-audio.com/Voicemeeter/ Voicemeeter] to mix your microphone and 3DS audio inputs together
| |
| #** If you do not wish to speak while streaming, simply point the app at the 3DS's audio device
| |
| #** If you do not wish to mix your microphone and 3DS audio inputs together, you can set up a scene using [https://obsproject.com/ OBS], create a Windowed Projector Preview and share on Discord that window. Then, in [https://obsproject.com/kb/audio-mixer-guide#setting-audio-levels Advanced Audio Properties], turn on the Audio Monitoring for the 3DS Audio Input Capture so that viewers on Discord can hear the 3DS audio. Note that this last step will direct the 3DS audio also to your audio output device (headphones/speakers).
| |
| #* To simply listen to the audio, you can [https://www.tenforums.com/tutorials/126383-listen-microphone-through-playback-device-windows.html listen to the audio input device in Windows]
| |
|
| |
| == Troubleshooting ==
| |
|
| |
| * Games such as those in the Pokemon series, Smash Bros 3DS and many more may crash when trying to load or after a loading screen. To avoid this issue, ensure that the debugger is enabled. To do this see [[3DS:Check local IP address|this]] page.
| |
| * Similarly, such of the above games may disable Wi-Fi connection while using Snickerstream when trying to play online. To counter this, make sure to enable NFC Patch in Snickerstream.
| |
|
| |
|
| [[Category:Nintendo 3DS guides]]
| | == Streaming with HzMod == |
