Playerjmr: Update Supported Devices

2025-07-29T19:46:46Z

Update Supported Devices

← Older revision		Revision as of 19:46, 29 July 2025
Line 2:		Line 2:

	=== What you need ===		=== What you need ===
	* An UDPIH device such as a [https://github.com/GaryOderNichts/udpih~~#instructions~~ Raspberry Pi ~~Zero~~/Pico] (~~or any RP2040 device~~)~~, or a~~ [https://github.com/GaryOderNichts/udpih_nxpayload#instructions hacked Nintendo Switch] (Unpatched or Chipped).		* An UDPIH device such as:
			** A [https://github.com/GaryOderNichts/udpih/blob/main/docs/setup-pico.md Raspberry Pi Pico / Pico 2]
			** A [https://github.com/GaryOderNichts/udpih/blob/main/docs/setup-linux.md Raspberry Pi Zero (W) / A / A+ / Zero 2 W / 4 / 5]
			** A [https://github.com/GaryOderNichts/udpih/blob/main/docs/setup-linux.md Steam Deck]
			** An [https://github.com/GaryOderNichts/udpih/blob/main/docs/setup-esp32.md Espressif ESP32 S2 / S3]
			** A [https://github.com/GaryOderNichts/udpih_nxpayload#instructions hacked Nintendo Switch] (Unpatched or Chipped).
	* [https://aroma.foryour.cafe Aroma]		* [https://aroma.foryour.cafe Aroma]
	** Scroll down to the '''Download''' section.		** Scroll down to the '''Download''' section.

Lazr: UDPIH is now real

2023-11-03T03:22:29Z

UDPIH is now real

New page

You should really only follow this if you were redirected here due to unable to use the browser for some reason.

=== What you need ===
* An UDPIH device such as a [https://github.com/GaryOderNichts/udpih#instructions Raspberry Pi Zero/Pico] (or any RP2040 device), or a [https://github.com/GaryOderNichts/udpih_nxpayload#instructions hacked Nintendo Switch] (Unpatched or Chipped).
* [https://aroma.foryour.cafe Aroma]
** Scroll down to the '''Download''' section.
** Read through the steps and click on the checkboxes.
** Click on <code>Download Payloads</code> and <code>Download Base Aroma</code>.
* [[Media:recovery_menu.zip | LoadRPX UDPIH Payload]] ([https://github.com/GaryOderNichts/udpih_payloads/ Source]).
* The latest release of the [https://github.com/wiiu-env/PayloadLoaderInstaller/releases PayloadLoader Installer].

=== SD Prep ===
# Copy the contents of the downloaded Aroma <code>.zip</code> files to the root of your SD Card.
# Copy the <code>recovery_menu</code> file from the <code>recovery_menu.zip</code> to the root of your SD Card.
# Copy the <code>PayloadLoader Installer.wuhb</code> from the PayloadLoader Installer <code>.zip</code> to <code>sd:/wiiu/apps</code> on your SD Card.
# Copy the <code>root.rpx</code> file from <code>sd:/wiiu/environments/aroma</code> to root of the SD Card, and rename to <code>launch.rpx</code>.
# Insert the SD Card into the Wii U.

=== UDPIH ===
# Shut off your Wii U, if it was on.
# Unplug the Wii U from power, and then replug it.
# Power on your Wii U.
# As soon as you see the Wii U logo, plug in your UDPIH device.
# Load any application. You should now see the EnvironmentLoader.
# Navigate to and select the <code>aroma</code> environment.
# Select <code>Wii U Menu</code>.
# At the Wii U Menu, launch the PayloadLoader Installer.
# Press A to <code>Check</code>.
# Press A on <code>Install / Update</code>.
# You’ll be asked if you are sure you want to install the PayloadLoader. Use the D-Pad to select <code>Install</code> and press A.
# Press A to shut down the console.

=== NAND Backup ===
{{Warning|A NAND Backup cannot be done without a GamePad. Please get a GamePad ASAP to perform a NAND Backup.}}
# Power on the console.
# Launch the Health and Safety application while holding B.
# Select <code>nanddumper</code>.
# Make the settings look like this and then press A. MLC is optional as it is the biggest part of the NAND Backup (8gb or 32gb depending on your model).
#* SLC: Yes
#* SLCCMPT: Yes
#* MLC: Optional
#* OTP: Yes
#* SEEPROM: Yes
# Wait for it to finish. It may take a few hours if you opted to dump MLC.
# To make sure you don’t lose the files, copy the <code>slc.bin</code>, <code>slccmpt.bin</code>, <code>seeprom.bin</code>, <code>otp.bin</code> and if you chose to go with a full backup, every <code>mlc.bin.part</code> file to your computer.
# Delete the files to free up space on the SD Card.

=== Autobooting PayloadLoader ===
{{info|This section is optional. If you do not want to autoboot into the PayloadLoader, then skip to [[wiiuguide:aroma/finalizing-setup | Finalizing Setup]].}}
# Start the console to boot into the Wii U Menu, launch the Health and Safety Information app.
# Navigate the list using the D-Pad and navigate to the <code>aroma</code> environment, press A to launch it.
# Select <code>Wii U Menu</code>.
# At the Wii U Menu, launch the PayloadLoader Installer.
# Press A to select <code>Check</code>.
# Select <code>Boot Options</code>.
# You will be asked if you want to switch the boot title. Press A to select <code>Switch to PayloadLoader</code>.
# When the process finished, press A to shutdown the console.
# The PayloadLoader will now be launched automatically on every boot.

=== Finalizing Setup ===
The main guide already has a page for this. You can find it [[wiiuguide:aroma/finalizing-setup | here]]

Wii U:Alternate Exploits/UDPIH - Revision history

Playerjmr: Update Supported Devices

Lazr: UDPIH is now real