3DS:MSET9 fresh - Revision history

Shinobijolteon: fix loink

2025-01-25T07:02:28Z

fix loink

← Older revision		Revision as of 07:02, 25 January 2025
Line 1:		Line 1:
	{{shortcut\|3DS:M9F\|3ds:MSET9F}}		{{shortcut\|3DS:M9F\|3ds:MSET9F}}
	==Required Reading==		==Required Reading==
	If you are experiencing the "System Settings loading infinitely after reinserting the SD card" error when trying to install MSET9 using the [[3dsguide:installing-boot9strap-(mset9-play-store)#section-ii---mset9\|MSET9 Play Store]] guide, this page will help you resolve that issue by swapping to a spare SD card. If you are following the [[3dsguide:installing-boot9strap-(mset9-cli)\|MSET9 CLI]] guide, you should follow the normal [[3dsguide:troubleshooting~~#installing-boot9strap~~-mset9\|troubleshooting]] steps instead.		If you are experiencing the "System Settings loading infinitely after reinserting the SD card" error when trying to install MSET9 using the [[3dsguide:installing-boot9strap-(mset9-play-store)#section-ii---mset9\|MSET9 Play Store]] guide, this page will help you resolve that issue by swapping to a spare SD card. If you are following the [[3dsguide:installing-boot9strap-(mset9-cli)\|MSET9 CLI]] guide, you should follow the normal [[3dsguide:troubleshooting-mset9.html\|troubleshooting]] steps instead.

	All of your original games and saves will be kept intact if you follow the steps properly.		All of your original games and saves will be kept intact if you follow the steps properly.

Danny8376: fix step number

2024-12-12T21:35:37Z

fix step number

← Older revision		Revision as of 21:35, 12 December 2024
Line 9:		Line 9:
	#* New models have four shoulder buttons ({{B\|L\|ZL\|ZR\|R}}) and the C-Stick directly above the Y button - Old models have two shoulder buttons ({{B\|L\|R}}) and no C-Stick.		#* New models have four shoulder buttons ({{B\|L\|ZL\|ZR\|R}}) and the C-Stick directly above the Y button - Old models have two shoulder buttons ({{B\|L\|R}}) and no C-Stick.
	# You injected MSET9 in Section II Step 10, not any earlier.		# You injected MSET9 in Section II Step 10, not any earlier.
	#* If System Settings is stuck because you injected too early (such as in Section II Step 5), just follow the instructions for removing MSET9 and then restart from the beginning of Section II. You do not have to swap out or reformat your SD card in this case.		#* If System Settings is stuck because you injected too early (such as in Section II Step 4), just follow the instructions for removing MSET9 and then restart from the beginning of Section II. You do not have to swap out or reformat your SD card in this case.

	== Instructions ==		== Instructions ==

ItsCrocoSwine: add category Category:Nintendo 3DS troubleshooting

2024-09-06T18:16:18Z

add category Category:Nintendo 3DS troubleshooting

← Older revision		Revision as of 18:16, 6 September 2024
Line 43:		Line 43:
	</ol>		</ol>
	[[Category:Nintendo 3DS guides]]		[[Category:Nintendo 3DS guides]]
			[[Category:Nintendo 3DS troubleshooting]]

ItsCrocoSwine: add category

2024-09-06T17:07:57Z

add category

← Older revision		Revision as of 17:07, 6 September 2024
Line 42:		Line 42:

	</ol>		</ol>
			[[Category:Nintendo 3DS guides]]

ItsCrocoSwine: removed line in infobox about other methods (these have been removed), and added a line to use normal troubleshooting if following MSET9 CLI

2024-08-14T13:45:24Z

removed line in infobox about other methods (these have been removed), and added a line to use normal troubleshooting if following MSET9 CLI

← Older revision		Revision as of 13:45, 14 August 2024
Line 1:		Line 1:
	{{shortcut\|3DS:M9F\|3ds:MSET9F}}		{{shortcut\|3DS:M9F\|3ds:MSET9F}}
	==Required Reading==		==Required Reading==
	If you are experiencing the "System Settings loading infinitely after reinserting the SD card" error when trying to install MSET9 using the [[3dsguide:installing-boot9strap-(mset9-play-store)#section-ii---mset9\|MSET9 Play Store]] guide, this page will help you resolve that issue by swapping to a spare SD card.		If you are experiencing the "System Settings loading infinitely after reinserting the SD card" error when trying to install MSET9 using the [[3dsguide:installing-boot9strap-(mset9-play-store)#section-ii---mset9\|MSET9 Play Store]] guide, this page will help you resolve that issue by swapping to a spare SD card. If you are following the [[3dsguide:installing-boot9strap-(mset9-cli)\|MSET9 CLI]] guide, you should follow the normal [[3dsguide:troubleshooting#installing-boot9strap-mset9\|troubleshooting]] steps instead.

	All of your original games and saves will be kept intact if you follow the steps properly.		All of your original games and saves will be kept intact if you follow the steps properly.
Line 25:		Line 25:
	# Proceed to the next section		# Proceed to the next section

	{{info\|Android phones and Chromebooks cannot format SDs correctly. As such, this method only works if you have a spare SD card that is already formatted to FAT32. ~~If you do not have a spare SD card that is formatted to FAT32, you will need to use one of the other two methods in this section.~~		{{info\|Android phones and Chromebooks cannot format SDs correctly. As such, this method only works if you have a spare SD card that is already formatted to FAT32.<br>Tip: All SD cards that are 32GB or smaller are FAT32 by default.}}
	<br>Tip: All SD cards that are 32GB or smaller are FAT32 by default.}}

	= Play Store =		= Play Store =

Blueness: fresh is for play store only now

2024-08-13T23:23:09Z

fresh is for play store only now

@@ Line 1: / Line 1: @@
 {{shortcut|3DS:M9F|3ds:MSET9F}}
 ==Required Reading==
-If you are experiencing the "System Settings loading infinitely after reinserting the SD card" error or Mii Maker doesn't appear in the Extra Data menu when trying to install MSET9 using the [[3dsguide:installing-boot9strap-(mset9-cli)#section-ii---mset9|MSET9 CLI]] or [[3dsguide:installing-boot9strap-(mset9-play-store)#section-ii---mset9|MSET9 Play Store]] guides, this page will help you resolve that issue by either swapping to a spare SD card or backing up and then formatting your original SD card.
+If you are experiencing the "System Settings loading infinitely after reinserting the SD card" error when trying to install MSET9 using the [[3dsguide:installing-boot9strap-(mset9-play-store)#section-ii---mset9|MSET9 Play Store]] guide, this page will help you resolve that issue by swapping to a spare SD card.
 All of your original games and saves will be kept intact if you follow the steps properly.
@@ Line 14: / Line 14: @@
 Follow these steps first to remove MSET9:
 # Power off your console
@@ Line 45: / Line 23: @@
 #* Once inside the <code>Nintendo 3DS</code> folder, tap on '''Use this folder''', then '''Allow''' if asked
 # Tap <code>Remove MSET9</code>
-# Proceed to the '''Play Store SD''' tab below
+# Proceed to the next section
-</span>
+{{info|Android phones and Chromebooks cannot format SDs correctly. As such, this method only works if you have a spare SD card that is already formatted to FAT32. If you do not have a spare SD card that is formatted to FAT32, you will need to use one of the other two methods in this section.
+<br>Tip: All SD cards that are 32GB or smaller are FAT32 by default.}}
-<tabber>
+= Play Store =
 <ol>
@@ Line 101: / Line 43: @@
 </ol>

Botman: Exploit Formatting + Redirects listed

2024-03-08T15:06:24Z

Exploit Formatting + Redirects listed

← Older revision		Revision as of 15:06, 8 March 2024
Line 1:		Line 1:
			{{shortcut\|3DS:M9F\|3ds:MSET9F}}
			==Required Reading==
	If you are experiencing the "System Settings loading infinitely after reinserting the SD card" error or Mii Maker doesn't appear in the Extra Data menu when trying to install MSET9 using the [[3dsguide:installing-boot9strap-(mset9-cli)#section-ii---mset9\|MSET9 CLI]] or [[3dsguide:installing-boot9strap-(mset9-play-store)#section-ii---mset9\|MSET9 Play Store]] guides, this page will help you resolve that issue by either swapping to a spare SD card or backing up and then formatting your original SD card.		If you are experiencing the "System Settings loading infinitely after reinserting the SD card" error or Mii Maker doesn't appear in the Extra Data menu when trying to install MSET9 using the [[3dsguide:installing-boot9strap-(mset9-cli)#section-ii---mset9\|MSET9 CLI]] or [[3dsguide:installing-boot9strap-(mset9-play-store)#section-ii---mset9\|MSET9 Play Store]] guides, this page will help you resolve that issue by either swapping to a spare SD card or backing up and then formatting your original SD card.

Gruetzig: missing bracket + no more dots in the Instructions at the end of steps + old -> Old

2024-02-19T00:16:27Z

missing bracket + no more dots in the Instructions at the end of steps + old -> Old

ItsCrocoSwine: fixed list formatting

2024-01-31T11:26:49Z

fixed list formatting

StarlitSkies: readd a line about mii maker extdata

2024-01-25T02:14:01Z

readd a line about mii maker extdata

← Older revision		Revision as of 02:14, 25 January 2024
Line 1:		Line 1:
	If you are experiencing the "System Settings loading infinitely after reinserting the SD card" error when trying to install MSET9 using the [[3dsguide:installing-boot9strap-(mset9-cli)#section-ii---mset9\|MSET9 CLI]] or [[3dsguide:installing-boot9strap-(mset9-play-store)#section-ii---mset9\|MSET9 Play Store]] guides, this page will help you resolve that issue by either swapping to a spare SD card or backing up and then formatting your original SD card.		If you are experiencing the "System Settings loading infinitely after reinserting the SD card" error or Mii Maker doesn't appear in the Extra Data menu when trying to install MSET9 using the [[3dsguide:installing-boot9strap-(mset9-cli)#section-ii---mset9\|MSET9 CLI]] or [[3dsguide:installing-boot9strap-(mset9-play-store)#section-ii---mset9\|MSET9 Play Store]] guides, this page will help you resolve that issue by either swapping to a spare SD card or backing up and then formatting your original SD card.

	All of your original games and saves will be kept intact if you follow the steps properly.		All of your original games and saves will be kept intact if you follow the steps properly.

← Older revision		Revision as of 00:16, 19 February 2024
Line 5:		Line 5:
	Before starting this guide, please ensure the following two things:		Before starting this guide, please ensure the following two things:
	# You have chosen the correct model type (New vs. Old) and system version in the MSET9 setup.		# You have chosen the correct model type (New vs. Old) and system version in the MSET9 setup.
	#* New models have four shoulder buttons ({{B\|L\|ZL\|ZR\|R}} and the C-Stick directly above the Y button - ~~old~~ models have two shoulder buttons ({{B\|L\|R}}) and no C-Stick.		#* New models have four shoulder buttons ({{B\|L\|ZL\|ZR\|R}}) and the C-Stick directly above the Y button - Old models have two shoulder buttons ({{B\|L\|R}}) and no C-Stick.
	# You injected MSET9 in Section II Step 10, not any earlier.		# You injected MSET9 in Section II Step 10, not any earlier.
	#* If System Settings is stuck because you injected too early (such as in Section II Step 5), just follow the instructions for removing MSET9 and then restart from the beginning of Section II. You do not have to swap out or reformat your SD card in this case.		#* If System Settings is stuck because you injected too early (such as in Section II Step 5), just follow the instructions for removing MSET9 and then restart from the beginning of Section II. You do not have to swap out or reformat your SD card in this case.
Line 56:		Line 56:

	<li> Eject the original SD card from your PC </li>		<li> Eject the original SD card from your PC </li>
	<li> '''Put the original SD card away.''' <br>{{critical\|1=Do '''not''' use the original SD card at all until after CFW is installed, or else the error is likely to keep happening.}} </li>		<li> '''Put the original SD card away''' <br>{{critical\|1=Do '''not''' use the original SD card at all until after CFW is installed, or else the error is likely to keep happening.}} </li>
	<li> Insert your spare SD card into your PC </li>		<li> Insert your spare SD card into your PC </li>
	<li> Make sure that this SD card is the spare and not the original </li>		<li> Make sure that this SD card is the spare and not the original </li>
	<li> [[Formatting_an_SD_card\|Format the spare SD card as FAT32]] <br>{{critical\|1=Do '''not''' copy your data back to the spare SD card until after CFW is installed, or else the error is likely to keep happening.}} </li>		<li> [[Formatting_an_SD_card\|Format the spare SD card as FAT32]] <br>{{critical\|1=Do '''not''' copy your data back to the spare SD card until after CFW is installed, or else the error is likely to keep happening.}} </li>
	<li> Insert the formatted, '''blank''' SD card into your console </li>		<li> Insert the formatted, '''blank''' SD card into your console </li>
	<li> Return to [[3dsguide:installing-boot9strap-(mset9-cli)#section-i---prep-work\|Section I Step 1]] of the MSET9 CLI Guide and complete every step until the bottom of the page. </li>		<li> Return to [[3dsguide:installing-boot9strap-(mset9-cli)#section-i---prep-work\|Section I Step 1]] of the MSET9 CLI Guide and complete every step until the bottom of the page </li>
	<li> After Luma3DS installs and your console boots to the HOME Menu, power off the console and switch to your original SD card before continuing to [[3dsguide:finalizing-setup\|Finalizing Setup]] </li>		<li> After Luma3DS installs and your console boots to the HOME Menu, power off the console and switch to your original SD card before continuing to [[3dsguide:finalizing-setup\|Finalizing Setup]] </li>

Line 74:		Line 74:
	<li> [[Formatting_an_SD_card\|Format the SD card as FAT32]] <br>{{critical\|1=Do '''not''' copy your data back to the SD card until after CFW is installed, or else the error is likely to keep happening.}} </li>		<li> [[Formatting_an_SD_card\|Format the SD card as FAT32]] <br>{{critical\|1=Do '''not''' copy your data back to the SD card until after CFW is installed, or else the error is likely to keep happening.}} </li>
	<li> Insert the formatted, '''blank''' SD card into your console </li>		<li> Insert the formatted, '''blank''' SD card into your console </li>
	<li> Return to [[3dsguide:installing-boot9strap-(mset9-cli)#section-i---prep-work\|Section I Step 1]] of the MSET9 CLI Guide and complete every step until the bottom of the page. </li>		<li> Return to [[3dsguide:installing-boot9strap-(mset9-cli)#section-i---prep-work\|Section I Step 1]] of the MSET9 CLI Guide and complete every step until the bottom of the page </li>
	<li> After Luma3DS installs and your console boots to the HOME Menu, power off your console </li>		<li> After Luma3DS installs and your console boots to the HOME Menu, power off your console </li>
	<li> Eject the SD from your console and insert it into your PC </li>		<li> Eject the SD from your console and insert it into your PC </li>
	<li> [[Formatting_an_SD_card\|Format the SD card as FAT32 again]] </li>		<li> [[Formatting_an_SD_card\|Format the SD card as FAT32 again]] </li>
	<li> Restore your backup to the SD card and follow [[3dsguide:restoring-updating-cfw\|Restoring / Updating CFW]] to ensure you have Luma on your SD card, then continue to [[3dsguide:finalizing-setup\|Finalizing Setup]]. </li>		<li> Restore your backup to the SD card and follow [[3dsguide:restoring-updating-cfw\|Restoring / Updating CFW]] to ensure you have Luma on your SD card, then continue to [[3dsguide:finalizing-setup\|Finalizing Setup]] </li>

	</ol>		</ol>
Line 95:		Line 95:
	<li> Delete everything from the SD card <br>{{critical\|1=Do '''not''' copy your data back to the spare SD card until after CFW is installed, or else the error is likely to keep happening.}} </li>		<li> Delete everything from the SD card <br>{{critical\|1=Do '''not''' copy your data back to the spare SD card until after CFW is installed, or else the error is likely to keep happening.}} </li>
	<li> Insert the '''blank''' spare SD card into your console </li>		<li> Insert the '''blank''' spare SD card into your console </li>
	<li> Return to [[3dsguide:installing-boot9strap-(mset9-play-store)#section-i---prep-work\|Section I Step 1]] of the MSET9 Play Store Guide and complete every step until the bottom of the page. </li>		<li> Return to [[3dsguide:installing-boot9strap-(mset9-play-store)#section-i---prep-work\|Section I Step 1]] of the MSET9 Play Store Guide and complete every step until the bottom of the page </li>
	<li> After Luma3DS installs and your console boots to the HOME Menu, power off the console and switch to your original SD card before continuing to [[3dsguide:finalizing-setup\|Finalizing Setup]] </li>		<li> After Luma3DS installs and your console boots to the HOME Menu, power off the console and switch to your original SD card before continuing to [[3dsguide:finalizing-setup\|Finalizing Setup]] </li>

← Older revision		Revision as of 11:26, 31 January 2024
Line 55:		Line 55:
	<ol>		<ol>

	<li ~~value="1"~~> Eject the original SD card from your PC		<li> Eject the original SD card from your PC </li>
	<li ~~value="2"~~> '''Put the original SD card away.''' <br>{{critical\|1=Do '''not''' use the original SD card at all until after CFW is installed, or else the error is likely to keep happening.}}		<li> '''Put the original SD card away.''' <br>{{critical\|1=Do '''not''' use the original SD card at all until after CFW is installed, or else the error is likely to keep happening.}} </li>
	<li ~~value="3"~~> Insert your spare SD card into your PC		<li> Insert your spare SD card into your PC </li>
	<li ~~value="4"~~> Make sure that this SD card is the spare and not the original		<li> Make sure that this SD card is the spare and not the original </li>
	<li ~~value="5"~~> [[Formatting_an_SD_card\|Format the spare SD card as FAT32]] <br>{{critical\|1=Do '''not''' copy your data back to the spare SD card until after CFW is installed, or else the error is likely to keep happening.}}		<li> [[Formatting_an_SD_card\|Format the spare SD card as FAT32]] <br>{{critical\|1=Do '''not''' copy your data back to the spare SD card until after CFW is installed, or else the error is likely to keep happening.}} </li>
	<li ~~value="6"~~> Insert the formatted, '''blank''' SD card into your console		<li> Insert the formatted, '''blank''' SD card into your console </li>
	<li ~~value="7"~~> Return to [[3dsguide:installing-boot9strap-(mset9-cli)#section-i---prep-work\|Section I Step 1]] of the MSET9 CLI Guide and complete every step until the bottom of the page.		<li> Return to [[3dsguide:installing-boot9strap-(mset9-cli)#section-i---prep-work\|Section I Step 1]] of the MSET9 CLI Guide and complete every step until the bottom of the page. </li>
	<li ~~value="8"~~> After Luma3DS installs and your console boots to the HOME Menu, power off the console and switch to your original SD card before continuing to [[3dsguide:finalizing-setup\|Finalizing Setup]]		<li> After Luma3DS installs and your console boots to the HOME Menu, power off the console and switch to your original SD card before continuing to [[3dsguide:finalizing-setup\|Finalizing Setup]] </li>

	</ol>		</ol>
Line 70:		Line 70:
	<ol>		<ol>

	<li ~~value="1"~~> Backup your SD card to a folder to your PC (especially the Nintendo 3DS and DCIM folders)		<li> Backup your SD card to a folder to your PC (especially the Nintendo 3DS and DCIM folders) </li>
	<li ~~value="2"~~> Make sure that your data is correctly backed up before formatting		<li> Make sure that your data is correctly backed up before formatting </li>
	<li ~~value="3"~~> [[Formatting_an_SD_card\|Format the SD card as FAT32]] <br>{{critical\|1=Do '''not''' copy your data back to the SD card until after CFW is installed, or else the error is likely to keep happening.}}		<li> [[Formatting_an_SD_card\|Format the SD card as FAT32]] <br>{{critical\|1=Do '''not''' copy your data back to the SD card until after CFW is installed, or else the error is likely to keep happening.}} </li>
	<li ~~value="4"~~> Insert the formatted, '''blank''' SD card into your console		<li> Insert the formatted, '''blank''' SD card into your console </li>
	<li ~~value="5"~~> Return to [[3dsguide:installing-boot9strap-(mset9-cli)#section-i---prep-work\|Section I Step 1]] of the MSET9 CLI Guide and complete every step until the bottom of the page.		<li> Return to [[3dsguide:installing-boot9strap-(mset9-cli)#section-i---prep-work\|Section I Step 1]] of the MSET9 CLI Guide and complete every step until the bottom of the page. </li>
	<li ~~value="6"~~> After Luma3DS installs and your console boots to the HOME Menu, power off your console		<li> After Luma3DS installs and your console boots to the HOME Menu, power off your console </li>
	<li ~~value="7"~~> Eject the SD from your console and insert it into your PC		<li> Eject the SD from your console and insert it into your PC </li>
	<li ~~value="8"~~> [[Formatting_an_SD_card\|Format the SD card as FAT32 again]]		<li> [[Formatting_an_SD_card\|Format the SD card as FAT32 again]] </li>
	<li ~~value="9"~~> Restore your backup to the SD card and follow [[3dsguide:restoring-updating-cfw\|Restoring / Updating CFW]] to ensure you have Luma on your SD card, then continue to [[3dsguide:finalizing-setup\|Finalizing Setup]].		<li> Restore your backup to the SD card and follow [[3dsguide:restoring-updating-cfw\|Restoring / Updating CFW]] to ensure you have Luma on your SD card, then continue to [[3dsguide:finalizing-setup\|Finalizing Setup]]. </li>

	</ol>		</ol>
Line 89:		Line 89:
	<ol>		<ol>

	<li ~~value="1"~~>Eject the original SD card from your phone/tablet/computer </li>		<li> Eject the original SD card from your phone/tablet/computer </li>
	<li ~~value="2"~~>'''Put the original SD card away.''' <br>{{critical\|1=Do '''not''' use the original SD card at all until after CFW is installed, or else the error is likely to keep happening.}}</li>		<li> '''Put the original SD card away.''' <br>{{critical\|1=Do '''not''' use the original SD card at all until after CFW is installed, or else the error is likely to keep happening.}} </li>
	<li ~~value="3"~~>Insert your spare SD card into your phone/tablet/computer</li>		<li> Insert your spare SD card into your phone/tablet/computer </li>
	<li ~~value="4"~~>Make sure that this SD card is the spare and not the original</li>		<li> Make sure that this SD card is the spare and not the original </li>
	<li ~~value="5"~~>Delete everything from the SD card <br>{{critical\|1=Do '''not''' copy your data back to the spare SD card until after CFW is installed, or else the error is likely to keep happening.}}</li>		<li> Delete everything from the SD card <br>{{critical\|1=Do '''not''' copy your data back to the spare SD card until after CFW is installed, or else the error is likely to keep happening.}} </li>
	<li ~~value="6"~~>Insert the '''blank''' spare SD card into your console</li>		<li> Insert the '''blank''' spare SD card into your console </li>
	<li ~~value="7"~~>Return to [[3dsguide:installing-boot9strap-(mset9-play-store)#section-i---prep-work\|Section I Step 1]] of the MSET9 Play Store Guide and complete every step until the bottom of the page.</li>		<li> Return to [[3dsguide:installing-boot9strap-(mset9-play-store)#section-i---prep-work\|Section I Step 1]] of the MSET9 Play Store Guide and complete every step until the bottom of the page. </li>
	<li ~~value="8"~~>After Luma3DS installs and your console boots to the HOME Menu, power off the console and switch to your original SD card before continuing to [[3dsguide:finalizing-setup\|Finalizing Setup]]</li>		<li> After Luma3DS installs and your console boots to the HOME Menu, power off the console and switch to your original SD card before continuing to [[3dsguide:finalizing-setup\|Finalizing Setup]] </li>

	</ol>		</ol>

	</tabber>		</tabber>