Hacks Guide Wiki - User contributions [en]

3DS:Wireless streaming

2023-06-16T20:47:14Z

Javdu: fixing some stuff for cuteNTR on macos

{{shortcut|3DS:STREAM}}
{{Page WIP}}
{{Warning|text=The guides below can't be used to stream DS games, DSiWare, and GBA games. You will need a hardware capture card to do that.}}
{{Critical|text='''This only works for New 3DS.''' If you absolutely want a method for Old 3DS, there is [[/HzMod|HzMod]]. Keep in mind that performance is still very bad and it is not intended for practical use.}}

This page will show you how to stream your New 3DS console's screens to your computer over WiFi.

*Your console and your computer need to be on the same network.
*Streaming audio over WiFi currently isn't possible, you will need to use an AUX cable and a device with Line In to receive audio.
*If you have a poor connection, you may not get the best results. The receiving computer should be connected to the network via ethernet or a 5 GHz connection.

==Finding your Console's IP ==
You'll need to know the local IP address of your 3DS later, so it's a good idea to find it now.
{{3DS:Check local IP address}}

==Streaming with NTR==
{{Info
| text = At the time of writing this, BootNTR Selector is not compatible with the latest standard release of Luma3DS. To combat this, we will be using a custom build with support for BootNTR.
}}
<tabber>
|-|Windows - Snickerstream=
===What You Need===
*Your console's IP from the first section
*The latest release of [https://github.com/RattletraPM/Snickerstream/releases/latest Snickerstream]
*The latest release of [https://github.com/PabloMK7/Luma3DS_3GX/releases/latest Luma3DS 3GX Loader]
*The latest release of [https://github.com/Nanquitas/BootNTR/releases/latest BootNTR Selector]
*[https://github.com/Steveice10/FBI/releases/latest FBI] installed on your console

=== Section I: Prep Work===
#Ensure that your console and your computer are on the same network
# Download and extract the latest Snickerstream <code>.zip</code> file
# Download the latest Luma3DS 3GX Loader <code>boot.firm</code> file
# Download the latest BootNTR Selector <code>.cia</code> file
#Power off your console
# Take the SD card out of your console and put it into your computer
#Replace the <code>boot.firm</code> file on the root of your SD card with the Luma3DS 3GX Loader one you downloaded
# Copy the BootNTR selector <code>.cia</code> file to your SD card
#*You may put this file where you can easily access it
# Put your SD card back into your console

===Section II: Installing CIAs===
# Power on your console
#*If you are prompted with a Luma3DS configuration screen, just press <code>START</code>
#Open FBI
# Press A on <code>SD</code> at the top of your bottom screen
# Find the BootNTR Selector <code>.cia</code> file that you copied, press A on it and select <code>Install and delete CIA</code>
#Press START to exit FBI

===Section III: Streaming===
# Open the Snickerstream <code>.exe</code> file from where you extracted it
#On your console, open the gift that appeared on your home menu and launch BootNTR Selector
#*If you're prompted with 3 buttons on your bottom screen, tap "Use default"
#*If you're prompted to choose an NTR version, choose 3.6
#*Your console's screen should flash some colors, meaning that it's ready for streaming
#Input your console's IP from the first section into the IP box in the Snickerstream window
#*You may also [https://github.com/RattletraPM/Snickerstream/wiki/Settings-101 adjust your settings] to your liking if you wish
#Click <code>Connect!</code> in the Snickerstream window
#*Your console's screens should now be streamed to your computer
|-|macOS - cuteNTR-OSX=
===What You Need===
*Your console's IP from the first section
*The latest release of [https://github.com/EBLeifEricson/cuteNTR-OSX/releases/tag/0.3.2 cuteNTR-OSX]
*The latest release of [https://github.com/PabloMK7/Luma3DS_3GX/releases/latest Luma3DS 3GX Loader]
*The latest release of [https://github.com/Nanquitas/BootNTR/releases/latest BootNTR Selector]
*[https://github.com/Steveice10/FBI/releases/latest FBI] installed on your console

=== Section I: Prep Work===
#Ensure that your console and your computer are on the same network
# Download <code>cuteNTR-0.3.2.dmg</code>
# Download the latest Luma3DS 3GX Loader <code>boot.firm</code> file
# Download the latest BootNTR Selector <code>.cia</code> file
#Power off your console
# Take the SD card out of your console and put it into your computer
#Replace the <code>boot.firm</code> file on the root of your SD card with the Luma3DS 3GX Loader one you downloaded
# Copy the BootNTR selector <code>.cia</code> file to your SD card
#*You may put this file where you can easily access it
# Put your SD card back into your console

===Section II: Installing CIAs===
# Power on your console
#*If you are prompted with a Luma3DS configuration screen, just press START
#Open FBI
# Press A on <code>SD</code> at the top of your bottom screen
# Find the BootNTR Selector <code>.cia</code> file that you copied, press A on it and select <code>Install and delete CIA</code>
#Press START to exit FBI

===Section III: Streaming===
#On your console, open the gift that appeared on your home menu and launch BootNTR Selector
#*If you're prompted with 3 buttons on your bottom screen, tap "Use default"
#*If you're prompted to choose an NTR version, choose 3.6
#*Your console's screen should flash some colors, meaning that it's ready for streaming
# Open the cuteNTR <code>.dmg</code>, and copy the app to the Applications folder
#* You may be prompted to enter the admin password
# Right click on the app and click 'open'
#* You may be prompted to enter the admin password
#Input your console's IP from the first section into the IP box in the cuteNTR window
#Click <code>Connect!</code> in the cuteNTR window
#*Your console's screens should now be streamed to your computer. The top and bottom screens will be 2 different windows. If you cannot find them, on the bottom of the screen where the dock is located, right click the cuteNTR icon and select "Show All Windows"
|-|Debian Linux - cuteNTR=
===What You Need===
*Your console's IP from the first section
*sudo
*The latest release of [https://github.com/PabloMK7/Luma3DS_3GX/releases/latest Luma3DS 3GX Loader]
*The latest release of [https://github.com/Nanquitas/BootNTR/releases/latest BootNTR Selector]
*[https://github.com/Steveice10/FBI/releases/latest FBI] installed on your console

=== Section I: Prep Work===

#Ensure that your console and your computer are on the same network
# Download the latest Luma3DS 3GX Loader <code>boot.firm</code> file
# Download the latest BootNTR Selector <code>.cia</code> file
#Power off your console
# Take the SD card out of your console and put it into your computer
#Replace the <code>boot.firm</code> file on the root of your SD card with the Luma3DS 3GX Loader one you downloaded
# Copy the BootNTR selector <code>.cia</code> file to your SD card
#*You may put this file where you can easily access it
# Put your SD card back into your console

=== Section II: installing cuteNTR===
This section will add a [https://askubuntu.com/a/4990 PPA] to your sources in order to install cuteNTR. Proceed on your own risk.
# Open the terminal
# Run <code>sudo add-apt-repository ppa:joenosie/3ds</code> to add the PPA to your sources
# Run <code>sudo apt update && sudo apt upgrade</code> to update your setup
# Run <code>sudo apt install cutentr</code> to install cuteNTR

===Section III: Installing CIAs===
# Power on your console
#*If you are prompted with a Luma3DS configuration screen, just press START
#Open FBI
# Press A on <code>SD</code> at the top of your bottom screen
# Find the BootNTR Selector <code>.cia</code> file that you copied, press A on it and select <code>Install and delete CIA</code>
#Press START to exit FBI

===Section IV: Streaming===
# Launch cuteNTR, either from your window manager or with <code>cutentr</code> in the terminal
#On your console, open the gift that appeared on your home menu and launch BootNTR Selector
#*If you're prompted with 3 buttons on your bottom screen, tap "Use default"
#*If you're prompted to choose an NTR version, choose 3.6
#*Your console's screen should flash some colors, meaning that it's ready for streaming
#Input your console's IP from the first section into the IP box next to the <code>Stream</code> button
#Click <code>Stream</code> in the cuteNTR window
#*Your console's screens should now be streamed to your computer

|-|Arch Linux - cuteNTR=
===What You Need===
*Your console's IP from the first section
*sudo
*The latest release of [https://github.com/PabloMK7/Luma3DS_3GX/releases/latest Luma3DS 3GX Loader]
*The latest release of [https://github.com/Nanquitas/BootNTR/releases/latest BootNTR Selector]
*[https://github.com/Steveice10/FBI/releases/latest FBI] installed on your console

=== Section I: Prep Work===

#Ensure that your console and your computer are on the same network
# Download the latest Luma3DS 3GX Loader <code>boot.firm</code> file
# Download the latest BootNTR Selector <code>.cia</code> file
#Power off your console
# Take the SD card out of your console and put it into your computer
#Replace the <code>boot.firm</code> file on the root of your SD card with the Luma3DS 3GX Loader one you downloaded
# Copy the BootNTR selector <code>.cia</code> file to your SD card
#*You may put this file where you can easily access it
# Put your SD card back into your console

=== Section II: Installing cuteNTR===
This is a small tutorial for installing the popular AUR helper [https://github.com/Jguer/yay yay] and installing cuteNTR with it. If you already have a working AUR helper, or know how to install AUR packages in general, you can download and make <code>cutentr-git</code> yourself, then continue with the next section.

# Open the terminal
# Run <code>sudo pacman -S --needed git base-devel</code> to make sure that you have the base-devel package group and git installed
#* Confirm your password if prompted
# Run <code>git clone https://aur.archlinux.org/yay.git</code>
# Run <code>cd yay</code>
# Run <code>makepkg -si</code> to install yay
#* Confirm your password if prompted
# Run <code>yay -S cutentr-git</code> to install cuteNTR
#* Confirm your password if prompted

===Section III: Installing CIAs===
# Power on your console
#*If you are prompted with a Luma3DS configuration screen, just press START
#Open FBI
# Press A on <code>SD</code> at the top of your bottom screen
# Find the BootNTR Selector <code>.cia</code> file that you copied, press A on it and select <code>Install and delete CIA</code>
#Press START to exit FBI

===Section IV: Streaming===
# Launch cuteNTR, either from your window manager or with <code>cutentr</code> in the terminal
#On your console, open the gift that appeared on your home menu and launch BootNTR Selector
#*If you're prompted with 3 buttons on your bottom screen, tap "Use default"
#*If you're prompted to choose an NTR version, choose 3.6
#*Your console's screen should flash some colors, meaning that it's ready for streaming
#Input your console's IP from the first section into the IP box next to the <code>Stream</code> button
#Click <code>Stream</code> in the cuteNTR window
#*Your console's screens should now be streamed to your computer

|-|Other Linux - cuteNTR=
===What You Need===
*Your console's IP from the first section
*The latest release of [https://flatpak.org/setup/ flatpak] installed on your computer for your operating system
*The latest release of [https://github.com/PabloMK7/Luma3DS_3GX/releases/latest Luma3DS 3GX Loader]
*The latest release of [https://github.com/Nanquitas/BootNTR/releases/latest BootNTR Selector]
*[https://github.com/Steveice10/FBI/releases/latest FBI] installed on your console

=== Section I: Prep Work===

#Ensure that your console and your computer are on the same network
# Download the latest Luma3DS 3GX Loader <code>boot.firm</code> file
# Download the latest BootNTR Selector <code>.cia</code> file
#Power off your console
# Take the SD card out of your console and put it into your computer
#Replace the <code>boot.firm</code> file on the root of your SD card with the Luma3DS 3GX Loader one you downloaded
# Copy the BootNTR selector <code>.cia</code> file to your SD card
#*You may put this file where you can easily access it
# Put your SD card back into your console

=== Section II: Installing cuteNTR

# Open the terminal
# Run <code>mkdir cuteNTR && cd cuteNTR</code> to make a new directory and go into it
# Run <code>wget https://gitlab.com/BoltsJ/cuteNTR/uploads/da6b5bafbab68b45cc9bee0ae590a3ca/com.gitlab.BoltsJ.cuteNTR.flatpak</code>
# Run <code>flatpak install com.gitlab.BoltsJ.cuteNTR.flatpak</code> to install cuteNTR
# Confirm your password and all other prompts with yes
# Run <code>cd .. && rm -r cuteNTR</code> to delete the directory

===Section III: Installing CIAs===
# Power on your console
#*If you are prompted with a Luma3DS configuration screen, just press START
#Open FBI
# Press A on <code>SD</code> at the top of your bottom screen
# Find the BootNTR Selector <code>.cia</code> file that you copied, press A on it and select <code>Install and delete CIA</code>
#Press START to exit FBI

===Section IV: Streaming===
# Launch cuteNTR by running <code>flatpak run com.gitlab.BoltsJ.cuteNTR</code>
#On your console, open the gift that appeared on your home menu and launch BootNTR Selector
#*If you're prompted with 3 buttons on your bottom screen, tap "Use default"
#*If you're prompted to choose an NTR version, choose 3.6
#*Your console's screen should flash some colors, meaning that it's ready for streaming
#Input your console's IP from the first section into the IP box next to the <code>Stream</code> button
#Click <code>Stream</code> in the cuteNTR window
#*Your console's screens should now be streamed to your computer

</tabber>

==Using Line In to Receive Audio==
===What You Need===

*A 3.5mm to 3.5mm audio cable
*An audio in (line in or microphone in) port on your computer
**Some computers have a single "headphone" port that can be used for both audio output and input. To use one of these, you will need a Y splitter

===How to use===

#Connect your 3DS to your computer's audio input port with a 3.5mm to 3.5mm audio cable
#Pipe the audio from your audio input port into the software you intend to use
#*The exact steps will depend on the software you're using
#*If you are recording or streaming your game using [https://obsproject.com/ OBS], add a new Audio Input Capture
#*If you are streaming your game via a service such as Discord, you will need to use software such as [https://vb-audio.com/Voicemeeter/ Voicemeeter] to mix your microphone and 3DS audio inputs together
#**If you do not wish to speak while streaming, simply point the app at the 3DS's audio device
#**If you do not wish to mix your microphone and 3DS audio inputs together, you can set up a scene using [https://obsproject.com/ OBS], create a Windowed Projector Preview and share on Discord that window. Then, in [https://obsproject.com/kb/audio-mixer-guide#setting-audio-levels Advanced Audio Properties], turn on the Audio Monitoring for the 3DS Audio Input Capture so that viewers on Discord can hear the 3DS audio. Note that this last step will direct the 3DS audio also to your audio output device (headphones/speakers).
#*To simply listen to the audio, you can [https://www.tenforums.com/tutorials/126383-listen-microphone-through-playback-device-windows.html listen to the audio input device in Windows]

==Troubleshooting==

#*Games such as those in the Pokemon series, Smash Bros 3DS and many more will crash instantly uponing trying to load or after a loading screen. To avoid this issue, ensure that the debugger is enabled. To do this see [[3DS:Check local IP address|this]] page.

==Credits==

[[Category:Nintendo 3DS guides]]

Wii U:SaveMii WUT Port

2023-06-08T20:30:42Z

Javdu:

{{Infobox homebrew
| developers = DaThinkingChair
| forwiiu = 1
| image = SaveMiiLogo.png
| imagesize = 256px
| version = v1.5.8
| website = https://gbatemp.net/threads/release-savemii-wut-port-wii-u-vwii-savefile-manager.608824/ gbatemp/608824
| github = Xpl0itU/savemii
| }}

'''SaveMii''' is a save manager for the Wii U. You can use it to dump or inject saves from Wii U and vWii games. It was originally made by Ryuzaki-MrL but has been forked and improved by Xpl0itU/DaThinkingChair.

== Installation ==

</noinclude>
<tabber>

|-|Tiramisu=

#[https://github.com/Xpl0itU/savemii/releases/tag/1.5.8 Download] the latest release of the SaveMii WUT Port-HBL
#Extract it and drag the <code>wiiu</code> folder to the root of the SD card and merge it.

|-|Aroma=

#[https://github.com/Xpl0itU/savemii/releases/tag/1.5.8 Download] the latest release of the of SaveMii WUT Port-Aroma.
#Copy the file <code>savemii.wuhb</code> into <code>sd:/wiiu/apps</code>

</tabber>

== Usage ==

When opening the app, you will be met with a blue screen that says Wii U Save Managment and vWii Save Managment. Select whichever one you want to manage for and you will be met with another screen that has all your titles.

=== Backing Up Saves ===

#Select whichever you game want with the <code>A</code> button.
#Select <code>Backup savedata</code> and select any empty slot. It goes up to 255.
#Select which users save data to back up. If it says you have a common save, say yes to backing it up.
#You will be brought to a black screen where it will begin backing the save up. This shouldn't take to long.
#Once it is done, on inside of the <code>wiiu</code> folder there will be a folder named <code>backups</code> and inside of this folder, there will be another folder with the title ID of your game. An easy way to know what game is what is to remember the last for digits in the ID.
#Inside of the ID there will be another folder with the name of the slot you choose. Inside of there, there will be another folder that has the name of a few digits. That is your save file. If you choose to dump the common, it will also be there.

=== Injecting Saves ===

#Inside of the <code>backups</code> folder create a new folder with the ID of the game you're trying to inject. You can find them [http://wiiubrew.org/wiki/Title_database here].
#Inside of the ID create a new folder that is any number between 0 - 255. Put the save inside of here.
#You can eject the SD card and move to your Wii U.
#Reopen SaveMii and select the game you're injecting the save file into.
#Press <code>A</code> and select <code>savadata</code> and select which user to delete the save from.
#You will be prompted to backup your current savedata, chose whatever you want.
#When that is complete, select <code>Restore savadata</code>. Remember the number you chose? For the slot put it as whatever number you chose.
#For the <code>Select SD user to copy from</code> make it whatever the save was called.
#For <code>Select Wii U user to copy to</code> make it whichever user you want to have the save.
#For the <code>Include 'common save'</code> select yes or no depending on if you have one.
#Press <code>A</code> to inject the save. Once this is done you can exit the application.

Wii U:SaveMii WUT Port

2023-06-07T22:09:18Z

Javdu: Moved from https://wiki.hacks.guide/w/index.php?title=User:Javdu/Wii_U:SaveMii_WUT_Port

{{Infobox homebrew
| developers = DaThinkingChair
| forwiiu = 1
| image = SaveMiiLogo.png
| imagesize = 256px
| version = v1.5.8
| website = https://gbatemp.net/threads/release-savemii-wut-port-wii-u-vwii-savefile-manager.608824/ gbatemp/608824
| github = Xpl0itU/savemii
| }}

'''SaveMii''' is a safe manager for the Wii U. You can use it to dump or inject saves from Wii U and vWii games. It was originally made by Ryuzaki-MrL but has been forked and improved by Xpl0itU/DaThinkingChair.

== Installation ==

</noinclude>
<tabber>

|-|Tiramisu=

#[https://github.com/Xpl0itU/savemii/releases/tag/1.5.8 Download] the latest release of the SaveMii WUT Port-HBL
#Extract it and drag the <code>wiiu</code> folder to the root of the SD card and merge it.

|-|Aroma=

#[https://github.com/Xpl0itU/savemii/releases/tag/1.5.8 Download] the latest release of the of SaveMii WUT Port-Aroma.
#Copy the file <code>savemii.wuhb</code> into <code>sd:/wiiu/apps</code>

</tabber>

== Usage ==

When opening the app, you will be met with a blue screen that says Wii U Save Managment and vWii Save Managment. Select whichever one you want to manage for and you will be met with another screen that has all your titles.

=== Backing Up Saves ===

#Select whichever you game want with the <code>A</code> button.
#Select <code>Backup savedata</code> and select any empty slot. It goes up to 255.
#Select which users save data to back up. If it says you have a common save, say yes to backing it up.
#You will be brought to a black screen where it will begin backing the save up. This shouldn't take to long.
#Once it is done, on inside of the <code>wiiu</code> folder there will be a folder named <code>backups</code> and inside of this folder, there will be another folder with the title ID of your game. An easy way to know what game is what is to remember the last for digits in the ID.
#Inside of the ID there will be another folder with the name of the slot you choose. Inside of there, there will be another folder that has the name of a few digits. That is your save file. If you choose to dump the common, it will also be there.

=== Injecting Saves ===

#Inside of the <code>backups</code> folder create a new folder with the ID of the game you're trying to inject. You can find them [http://wiiubrew.org/wiki/Title_database here].
#Inside of the ID create a new folder that is any number between 0 - 255. Put the save inside of here.
#You can eject the SD card and move to your Wii U.
#Reopen SaveMii and select the game you're injecting the save file into.
#Press <code>A</code> and select <code>savadata</code> and select which user to delete the save from.
#You will be prompted to backup your current savedata, chose whatever you want.
#When that is complete, select <code>Restore savadata</code>. Remember the number you chose? For the slot put it as whatever number you chose.
#For the <code>Select SD user to copy from</code> make it whatever the save was called.
#For <code>Select Wii U user to copy to</code> make it whichever user you want to have the save.
#For the <code>Include 'common save'</code> select yes or no depending on if you have one.
#Press <code>A</code> to inject the save. Once this is done you can exit the application.

Wii U:SDCafiine

2023-06-07T22:09:03Z

Javdu: sdcafiine page moved from https://wiki.hacks.guide/wiki/User:Javdu/Wii_U:SDCafiine#Aroma-0

{{Infobox homebrew
| developers = Maschell
| forwiiu = 1
| image = Sdcafiine-icon.png
| imagealt = ModMoon logo
| imagesize = 256px
| version = v0.1.2
| website = https://gbatemp.net/threads/sdcafiine.471360/ gbatemp/471630
| github = wiiu-env/sdcafiine_plugin
|
}}

'''SDCafiine''' is a mod manager for the Wii U. It can overwrite textures, audio and much more. It can do mods for any title on the Wii U - including system software for things like custom Themes or reinjecting life into Wara Wara Plaza.

== Installation ==

</noinclude>
<tabber>

|-|Tiramisu=

#[https://github.com/Maschell/SDCafiine Download] the latest release of the legacy edition of SDCafiine.
#Extract it and drag the <code>wiiu</code> folder to the root of the SD card and merge it.

|-|Aroma=

#[https://github.com/wiiu-env/sdcafiine_plugin Download] the latest release of the of SDCafiine.
#Copy the file <code>sdcafiine.wps</code> into <code>sd:/wiiu/environments/aroma/plugins</code>

</tabber>

== Usage ==

</noinclude>
<tabber>

|-|Tiramisu=

#Create a folder named <code>sdcafiine</code> on the root of your SD card.
#Find a mod you would like to use. [https://gamebanana.com/ Game Banana] is the best place to get these.
#Find the title ID for your game. You can find it [http://wiiubrew.org/wiki/Title%20database here].
#Create a folder inside of the <code>sdcafiine</code> folder you created earlier with the name being the title ID for whatever game you're modding.
#Drag the <code>content</code> part of your modpack into the folder you just created.
#If you want multiple mod packs, create a folder inside of the game ID for each mod pack.
#Eject the SD card from the PC and put it in the Wii U and power on. Launch the SDCafiine app in the Homebrew Launcher and launch the game you modded.
|-|Aroma=

#Create a folder named <code>sdcafiine</code> inside the <code>wiiu</code> folder on your SD card.
#Find a mod you would like to use. [https://gamebanana.com/ Game Banana] is the best place to get these.
#Find the title ID for your game. You can find it [http://wiiubrew.org/wiki/Title%20database here].
#Create a folder inside of the <code>wiiu/sdcafiine</code> folder you created earlier with the name being the title ID for whatever game you're modding.
#Drag the <code>content</code> part of your modpack into the folder you just created.
#If you want multiple mod packs, create a folder inside of the game ID for each mod pack.
#Eject the SD card from the PC and put it in the Wii U and power on. Launch your game of choice and SDCafiine should be automatically launched.

</tabber>

==SD File layout==

</noinclude>
<tabber>

|-|Tiramisu=
{{Tree list}}

* [[File:Gnome-media-flash.svg|20px|link=]] (root)
** [[File:Icons8 flat opened folder.svg|20px|link=]] wiiu
** [[File:Icons8 flat opened folder.svg|20px|link=]] apps
** [[File:Icons8 flat opened folder.svg|20px|link=]] SDCafiine
**** [[File:Icons8 flat file.svg|20px|link=]] '''sdcafiine.elf'''
**** [[File:Icons8 flat file.svg|20px|link=]] '''icon.png'''
**** [[File:Icons8 flat file.svg|20px|link=]] '''meta.xml'''
{{Tree list}}

** [[File:Icons8 flat opened folder.svg|20px|link=]] sdcafiine
*** [[File:Icons8 flat opened folder.svg|20px|link=]] (gameid)
**** [[File:Icons8 flat opened folder.svg|20px|link=]] content
{{Tree list}}

|-|Aroma=
{{Tree list}}
* [[File:Gnome-media-flash.svg|20px|link=]] (root)
** [[File:Icons8 flat opened folder.svg|20px|link=]] wiiu
*** [[File:Icons8 flat opened folder.svg|20px|link=]] sdcafiine
**** [[File:Icons8 flat opened folder.svg|20px|link=]] (gameid)
***** [[File:Icons8 flat opened folder.svg|20px|link=]] content
*** [[File:Icons8 flat opened folder.svg|20px|link=]] environments
**** [[File:Icons8 flat opened folder.svg|20px|link=]] aroma
***** [[File:Icons8 flat opened folder.svg|20px|link=]] plugins
****** [[File:Icons8 flat file.svg|20px|link=]] '''sdcafiine.wps'''
***** [[File:Icons8 flat file.svg|20px|link=]] root.rpx
{{Tree list/end}}

</tabber>

User:Javdu/Wii U:SDCafiine

2023-05-14T18:23:56Z

Javdu:

{{Infobox homebrew
| developers = Maschell
| forwiiu = 1
| image = Sdcafiine-icon.png
| imagealt = ModMoon logo
| imagesize = 256px
| version = v0.1.2
| website = https://gbatemp.net/threads/sdcafiine.471360/ gbatemp/471630
| github = wiiu-env/sdcafiine_plugin
|
}}

'''SDCafiine''' is a mod manager for the Wii U. It can overwrite textures, audio and much more. It can do mods for any title on the Wii U - including system software for things like custom Themes or reinjecting life into Wara Wara Plaza.

== Installation ==

</noinclude>
<tabber>

|-|Tiramisu=

#[https://github.com/Maschell/SDCafiine Download] the latest release of the legacy edition of SDCafiine.
#Extract it and drag the <code>wiiu</code> folder to the root of the SD card and merge it.

|-|Aroma=

#[https://github.com/wiiu-env/sdcafiine_plugin Download] the latest release of the of SDCafiine.
#Copy the file <code>sdcafiine.wps</code> into <code>sd:/wiiu/environments/aroma/plugins</code>

</tabber>

== Usage ==

</noinclude>
<tabber>

|-|Tiramisu=

#Create a folder named <code>sdcafiine</code> on the root of your SD card.
#Find a mod you would like to use. [https://gamebanana.com/ Game Banana] is the best place to get these.
#Find the title ID for your game. You can find it [http://wiiubrew.org/wiki/Title%20database here].
#Create a folder inside of the <code>sdcafiine</code> folder you created earlier with the name being the title ID for whatever game you're modding.
#Drag the <code>content</code> part of your modpack into the folder you just created.
#If you want multiple mod packs, create a folder inside of the game ID for each mod pack.
#Eject the SD card from the PC and put it in the Wii U and power on. Launch the SDCafiine app in the Homebrew Launcher and launch the game you modded.
|-|Aroma=

#Create a folder named <code>sdcafiine</code> inside the <code>wiiu</code> folder on your SD card.
#Find a mod you would like to use. [https://gamebanana.com/ Game Banana] is the best place to get these.
#Find the title ID for your game. You can find it [http://wiiubrew.org/wiki/Title%20database here].
#Create a folder inside of the <code>wiiu/sdcafiine</code> folder you created earlier with the name being the title ID for whatever game you're modding.
#Drag the <code>content</code> part of your modpack into the folder you just created.
#If you want multiple mod packs, create a folder inside of the game ID for each mod pack.
#Eject the SD card from the PC and put it in the Wii U and power on. Laucnh your game of choice and SDCafiine should be automatically launched.

</tabber>

==SD File layout==

</noinclude>
<tabber>

|-|Tiramisu=
{{Tree list}}

* [[File:Gnome-media-flash.svg|20px|link=]] (root)
** [[File:Icons8 flat opened folder.svg|20px|link=]] wiiu
** [[File:Icons8 flat opened folder.svg|20px|link=]] apps
** [[File:Icons8 flat opened folder.svg|20px|link=]] SDCafiine
**** [[File:Icons8 flat file.svg|20px|link=]] '''sdcafiine.elf'''
**** [[File:Icons8 flat file.svg|20px|link=]] '''icon.png'''
**** [[File:Icons8 flat file.svg|20px|link=]] '''meta.xml'''
{{Tree list}}

** [[File:Icons8 flat opened folder.svg|20px|link=]] sdcafiine
*** [[File:Icons8 flat opened folder.svg|20px|link=]] (gameid)
**** [[File:Icons8 flat opened folder.svg|20px|link=]] content
{{Tree list}}

|-|Aroma=
{{Tree list}}
* [[File:Gnome-media-flash.svg|20px|link=]] (root)
** [[File:Icons8 flat opened folder.svg|20px|link=]] wiiu
*** [[File:Icons8 flat opened folder.svg|20px|link=]] sdcafiine
**** [[File:Icons8 flat opened folder.svg|20px|link=]] (gameid)
***** [[File:Icons8 flat opened folder.svg|20px|link=]] content
*** [[File:Icons8 flat opened folder.svg|20px|link=]] environments
**** [[File:Icons8 flat opened folder.svg|20px|link=]] aroma
***** [[File:Icons8 flat opened folder.svg|20px|link=]] plugins
****** [[File:Icons8 flat file.svg|20px|link=]] '''sdcafiine.wps'''
***** [[File:Icons8 flat file.svg|20px|link=]] root.rpx
{{Tree list/end}}

</tabber>

User:Javdu/Wii U:SaveMii WUT Port

2023-05-13T22:53:35Z

Javdu:

{{Infobox homebrew
| developers = DaThinkingChair
| forwiiu = 1
| image = SaveMiiLogo.png
| imagesize = 256px
| version = v1.5.8
| website = https://gbatemp.net/threads/release-savemii-wut-port-wii-u-vwii-savefile-manager.608824/ gbatemp/608824
| github = Xpl0itU/savemii
| }}

'''SaveMii''' is a safe manager for the Wii U. You can use it to dump or inject saves from Wii U and vWii games. It was originally made by Ryuzaki-MrL but has been forked and improved by Xpl0itU/DaThinkingChair.

== Installation ==

</noinclude>
<tabber>

|-|Tiramisu=

#[https://github.com/Xpl0itU/savemii/releases/tag/1.5.8 Download] the latest release of the SaveMii WUT Port-HBL
#Extract it and drag the <code>wiiu</code> folder to the root of the SD card and merge it.

|-|Aroma=

#[https://github.com/Xpl0itU/savemii/releases/tag/1.5.8 Download] the latest release of the of SaveMii WUT Port-Aroma.
#Copy the file <code>savemii.wuhb</code> into <code>sd:/wiiu/apps</code>

</tabber>

== Usage ==

When opening the app, you will be met with a blue screen that says Wii U Save Managment and vWii Save Managment. Select whichever one you want to manage for and you will be met with another screen that has all your titles.

=== Backing Up Saves ===

#Select whichever you game want with the <code>A</code> button.
#Select <code>Backup savedata</code> and select any empty slot. It goes up to 255.
#Select which users save data to back up. If it says you have a common save, say yes to backing it up.
#You will be brought to a black screen where it will begin backing the save up. This shouldn't take to long.
#Once it is done, on inside of the <code>wiiu</code> folder there will be a folder named <code>backups</code> and inside of this folder, there will be another folder with the title ID of your game. An easy way to know what game is what is to remember the last for digits in the ID.
#Inside of the ID there will be another folder with the name of the slot you choose. Inside of there, there will be another folder that has the name of a few digits. That is your save file. If you choose to dump the common, it will also be there.

=== Injecting Saves ===

#Inside of the <code>backups</code> folder create a new folder with the ID of the game you're trying to inject. You can find them [http://wiiubrew.org/wiki/Title_database here].
#Inside of the ID create a new folder that is any number between 0 - 255. Put the save inside of here.
#You can eject the SD card and move to your Wii U.
#Reopen SaveMii and select the game you're injecting the save file into.
#Press <code>A</code> and select <code>savadata</code> and select which user to delete the save from.
#You will be prompted to backup your current savedata, chose whatever you want.
#When that is complete, select <code>Restore savadata</code>. Remember the number you chose? For the slot put it as whatever number you chose.
#For the <code>Select SD user to copy from</code> make it whatever the save was called.
#For <code>Select Wii U user to copy to</code> make it whichever user you want to have the save.
#For the <code>Include 'common save'</code> select yes or no depending on if you have one.
#Press <code>A</code> to inject the save. Once this is done you can exit the application.

User:Javdu/Wii U:SaveMii WUT Port

2023-05-13T22:50:56Z

Javdu:

{{Infobox homebrew
| developers = DaThinkingChair
| forwiiu = 1
| image = SaveMiiLogo.png
| imagesize = 256px
| version = v1.5.8
| website = https://gbatemp.net/threads/release-savemii-wut-port-wii-u-vwii-savefile-manager.608824/ gbatemp/608824
| github = Xpl0itU/savemii
| }}

'''SaveMii''' is a safe manager for the Wii U. You can use it to dump or inject saves from Wii U and vWii games. It was originally made by Ryuzaki-MrL but has been forked and improved by Xpl0itU or DaThinkingChair.

== Installation ==

</noinclude>
<tabber>

|-|Tiramisu=

#[https://github.com/Xpl0itU/savemii/releases/tag/1.5.8 Download] the latest release of the SaveMii WUT Port-HBL
#Extract it and drag the <code>wiiu</code> folder to the root of the SD card and merge it.

|-|Aroma=

#[https://github.com/Xpl0itU/savemii/releases/tag/1.5.8 Download] the latest release of the of SaveMii WUT Port-Aroma.
#Copy the file <code>savemii.wuhb</code> into <code>sd:/wiiu/apps</code>

</tabber>

== Usage ==

When opening the app, you will be met with a blue screen that says Wii U Save Managment and vWii Save Managment. Select whichever one you want to manage for and you will be met with another screen that has all your titles.

=== Backing Up Saves ===

#Select whichever you game want with the <code>A</code> button.
#Select <code>Backup savedata</code> and select any empty slot. It goes up to 255.
#Select which users save data to back up. If it says you have a common save, say yes to backing it up.
#You will be brought to a black screen where it will begin backing the save up. This shouldn't take to long.
#Once it is done, on inside of the <code>wiiu</code> folder there will be a folder named <code>backups</code> and inside of this folder, there will be another folder with the title ID of your game. An easy way to know what game is what is to remember the last for digits in the ID.
#Inside of the ID there will be another folder with the name of the slot you choose. Inside of there, there will be another folder that has the name of a few digits. That is your save file. If you choose to dump the common, it will also be there.

=== Injecting Saves ===

#Inside of the <code>backups</code> folder create a new folder with the ID of the game you're trying to inject. You can find them [http://wiiubrew.org/wiki/Title_database here].
#Inside of the ID create a new folder that is any number between 0 - 255. Put the save inside of here.
#You can eject the SD card and move to your Wii U.
#Reopen SaveMii and select the game you're injecting the save file into.
#Press <code>A</code> and select <code>savadata</code> and select which user to delete the save from.
#You will be prompted to backup your current savedata, chose whatever you want.
#When that is complete, select <code>Restore savadata</code>. Remember the number you chose? For the slot put it as whatever number you chose.
#For the <code>Select SD user to copy from</code> make it whatever the save was called.
#For <code>Select Wii U user to copy to</code> make it whichever user you want to have the save.
#For the <code>Include 'common save'</code> select yes or no depending on if you have one.
#Press <code>A</code> to inject the save. Once this is done you can exit the application.

User:Javdu/Wii U:SaveMii WUT Port

2023-05-13T22:49:41Z

Javdu: /* Installation */

{{Infobox homebrew
| developers = DaThinkingChair
| forwiiu = 1
| image = SaveMiiLogo.png
| imagesize = 256px
| version = v1.5.8
| website = https://gbatemp.net/threads/release-savemii-wut-port-wii-u-vwii-savefile-manager.608824/ gbatemp/608824
| github = Xpl0itU/savemii
| }}

'''SaveMii''' is a safe manager for the Wii U. You can use it to dump or inject saves from Wii U and vWii games. It was originally made by Ryuzaki-MrL but has been forked and improved by Xpl0itU or DaThinkingChair.

== Installation ==

</noinclude>
<tabber>

|-|Tiramisu=

#[https://github.com/Xpl0itU/savemii/releases/tag/1.5.8 Download] the latest release of the SaveMii WUT Port-HBL
#Extract it and drag the <code>wiiu</code> folder to the root of the SD card and merge it.

|-|Aroma=

#[https://github.com/Xpl0itU/savemii/releases/tag/1.5.8 Download] the latest release of the of SaveMii WUT Port-Aroma.
#Copy the file <code>savemii.wuhb</code> into <code>sd:/wiiu/apps</code>

</tabber>

== Usage ==

When opening the app, you will be met with a blue screen that says Wii U Save Managment and vWii Save Managment. Select whichever one you want to manage for and you will be met with another screen that has all your titles.

=== Backing Up Saves ===

*Select whichever you game want with the <code>A</code> button.
*Select <code>Backup savedata</code> and select any empty slot. It goes up to 255.
*Select which users save data to back up. If it says you have a common save, say yes to backing it up.
*You will be brought to a black screen where it will begin backing the save up. This shouldn't take to long.
*Once it is done, on inside of the <code>wiiu</code> folder there will be a folder named <code>backups</code> and inside of this folder, there will be another folder with the title ID of your game. An easy way to know what game is what is to remember the last for digits in the ID.
*Inside of the ID there will be another folder with the name of the slot you choose. Inside of there, there will be another folder that has the name of a few digits. That is your save file. If you choose to dump the common, it will also be there.

=== Injecting Saves ===

*Inside of the <code>backups</code> folder create a new folder with the ID of the game you're trying to inject. You can find them [http://wiiubrew.org/wiki/Title_database here].
*Inside of the ID create a new folder that is any number between 0 - 255. Put the save inside of here.
*You can eject the SD card and move to your Wii U.
*Reopen SaveMii and select the game you're injecting the save file into.
*Press <code>A</code> and select <code>savadata</code> and select which user to delete the save from.
*You will be prompted to backup your current savedata, chose whatever you want.
*When that is complete, select <code>Restore savadata</code>. Remember the number you chose? For the slot put it as whatever number you chose.
*For the <code>Select SD user to copy from</code> make it whatever the save was called.
*For <code>Select Wii U user to copy to</code> make it whichever user you want to have the save.
*For the <code>Include 'common save' select yes or no depending on if you have one.
*Press <code>A</code> to inject the save. Once this is done you can exit the application.

User:Javdu/Wii U:SaveMii WUT Port

2023-05-13T22:35:11Z

Javdu:

{{Infobox homebrew
| developers = DaThinkingChair
| forwiiu = 1
| image = SaveMiiLogo.png
| imagesize = 256px
| version = v1.5.8
| website = https://gbatemp.net/threads/release-savemii-wut-port-wii-u-vwii-savefile-manager.608824/ gbatemp/608824
| github = Xpl0itU/savemii
| }}

'''SaveMii''' is a safe manager for the Wii U. You can use it to dump or inject saves from Wii U and vWii games. It was originally made by Ryuzaki-MrL but has been forked and improved by Xpl0itU or DaThinkingChair.

== Installation ==

</noinclude>
<tabber>

|-|Tiramisu=

#[https://github.com/Xpl0itU/savemii/releases/tag/1.5.8 Download] the latest release of the SaveMii WUT Port-HBL
#Extract it and drag the <code>wiiu</code> folder to the root of the SD card and merge it.

|-|Aroma=

#[https://github.com/Xpl0itU/savemii/releases/tag/1.5.8 Download] the latest release of the of SaveMii WUT Port-Aroma.
#Copy the file <code>savemii.wuhb</code> into <code>sd:/wiiu/environments/aroma/plugins</code>

</tabber>

== Usage ==

When opening the app, you will be met with a blue screen that says Wii U Save Managment and vWii Save Managment. Select whichever one you want to manage for and you will be met with another screen that has all your titles.

=== Backing Up Saves ===

*Select whichever you game want with the <code>A</code> button.
*Select <code>Backup savedata</code> and select any empty slot. It goes up to 255.
*Select which users save data to back up. If it says you have a common save, say yes to backing it up.
*You will be brought to a black screen where it will begin backing the save up. This shouldn't take to long.
*Once it is done, on inside of the <code>wiiu</code> folder there will be a folder named <code>backups</code> and inside of this folder, there will be another folder with the title ID of your game. An easy way to know what game is what is to remember the last for digits in the ID.
*Inside of the ID there will be another folder with the name of the slot you choose. Inside of there, there will be another folder that has the name of a few digits. That is your save file. If you choose to dump the common, it will also be there.

=== Injecting Saves ===

*Inside of the <code>backups</code> folder create a new folder with the ID of the game you're trying to inject. You can find them [http://wiiubrew.org/wiki/Title_database here].
*Inside of the ID create a new folder that is any number between 0 - 255. Put the save inside of here.
*You can eject the SD card and move to your Wii U.
*Reopen SaveMii and select the game you're injecting the save file into.
*Press <code>A</code> and select <code>savadata</code> and select which user to delete the save from.
*You will be prompted to backup your current savedata, chose whatever you want.
*When that is complete, select <code>Restore savadata</code>. Remember the number you chose? For the slot put it as whatever number you chose.
*For the <code>Select SD user to copy from</code> make it whatever the save was called.
*For <code>Select Wii U user to copy to</code> make it whichever user you want to have the save.
*For the <code>Include 'common save' select yes or no depending on if you have one.
*Press <code>A</code> to inject the save. Once this is done you can exit the application.

User:Javdu/Wii U:SaveMii WUT Port

2023-05-13T22:33:16Z

Javdu: savemii page

{{Infobox homebrew
| developers = DaThinkingChair
| forwiiu = 1
| image = SaveMiiLogo.png
| imagesize = 256px
| version = v1.5.8
| website = https://gbatemp.net/threads/release-savemii-wii-u-vwii-savefile-manager.466644/ gbatemp/466644
| github = Xpl0itU/savemii
| }}

'''SaveMii''' is a safe manager for the Wii U. You can use it to dump or inject saves from Wii U and vWii games. It was originally made by Ryuzaki-MrL but has been forked and improved by Xpl0itU or DaThinkingChair.

== Installation ==

</noinclude>
<tabber>

|-|Tiramisu=

#[https://github.com/Xpl0itU/savemii/releases/tag/1.5.8 Download] the latest release of the SaveMii WUT Port-HBL
#Extract it and drag the <code>wiiu</code> folder to the root of the SD card and merge it.

|-|Aroma=

#[https://github.com/Xpl0itU/savemii/releases/tag/1.5.8 Download] the latest release of the of SaveMii WUT Port-Aroma.
#Copy the file <code>savemii.wuhb</code> into <code>sd:/wiiu/environments/aroma/plugins</code>

</tabber>

== Usage ==

When opening the app, you will be met with a blue screen that says Wii U Save Managment and vWii Save Managment. Select whichever one you want to manage for and you will be met with another screen that has all your titles.

=== Backing Up Saves ===

*Select whichever you game want with the <code>A</code> button.
*Select <code>Backup savedata</code> and select any empty slot. It goes up to 255.
*Select which users save data to back up. If it says you have a common save, say yes to backing it up.
*You will be brought to a black screen where it will begin backing the save up. This shouldn't take to long.
*Once it is done, on inside of the <code>wiiu</code> folder there will be a folder named <code>backups</code> and inside of this folder, there will be another folder with the title ID of your game. An easy way to know what game is what is to remember the last for digits in the ID.
*Inside of the ID there will be another folder with the name of the slot you choose. Inside of there, there will be another folder that has the name of a few digits. That is your save file. If you choose to dump the common, it will also be there.

=== Injecting Saves ===

*Inside of the <code>backups</code> folder create a new folder with the ID of the game you're trying to inject. You can find them [http://wiiubrew.org/wiki/Title_database here].
*Inside of the ID create a new folder that is any number between 0 - 255. Put the save inside of here.
*You can eject the SD card and move to your Wii U.
*Reopen SaveMii and select the game you're injecting the save file into.
*Press <code>A</code> and select <code>savadata</code> and select which user to delete the save from.
*You will be prompted to backup your current savedata, chose whatever you want.
*When that is complete, select <code>Restore savadata</code>. Remember the number you chose? For the slot put it as whatever number you chose.
*For the <code>Select SD user to copy from</code> make it whatever the save was called.
*For <code>Select Wii U user to copy to</code> make it whichever user you want to have the save.
*For the <code>Include 'common save' select yes or no depending on if you have one.
*Press <code>A</code> to inject the save. Once this is done you can exit the application.

File:SaveMiiLogo.png

2023-05-13T20:14:40Z

Javdu:

3DS:Remove Parental Controls

2023-05-13T19:56:17Z

Javdu:

This page is about how to remove Parental Controls, assuming you do not know the PIN or the answer to the secret question.

{{warning|text='''Disclaimer:''' You should only do this on consoles that you fully own. We are not liable for any consequences that may come from removing Parental Controls on someone else's console.}}

== Using mkey generator ==

mkey generator at [https://mkey.eiphax.tech/ eiphax] is able to generate a master key.

{{Clickable button 2|Go to mkey generator|url=https://mkey.eiphax.tech/|class=mw-ui-progressive}}

[[Category:Nintendo 3DS guides]]

3DS:Remove Parental Controls

2023-05-13T19:54:34Z

Javdu: still telling us to use salthax, updated to eiphax

This page is about how to remove Parental Controls, assuming you do not know the PIN or the answer to the secret question.

{{warning|text='''Disclaimer:''' You should only do this on consoles that you fully own. We are not liable for any consequences that may come from removing Parental Controls on someone else's console.}}

== Using mkey generator ==

mkey generator at [https://mkey.eiphax.tech/] is able to generate a master key.

{{Clickable button 2|Go to mkey generator|url=https://mkey.eiphax.tech/|class=mw-ui-progressive}}

[[Category:Nintendo 3DS guides]]

User:Javdu/Wii U:SDCafiine

2023-05-13T03:56:50Z

Javdu: /* SD File layout */

{{Infobox homebrew
| developers = Maschell
| forwiiu = 1
| image = Sdcafiine-icon.png
| imagealt = ModMoon logo
| imagesize = 256px
| version = v0.1.2
| website = https://gbatemp.net/threads/sdcafiine.471360/ gbatemp/471630
| github = wiiu-env/sdcafiine_plugin
|
}}

'''SDCafiine''' is a mod manager for the Wii U. It can overwrite textures, audio and much more. It can do mods for any title on the Wii U - including system software for things like custom Themes or reinjecting life into Wara Wara Plaza.

== Installation ==

</noinclude>
<tabber>

|-|Tiramisu=

#[https://github.com/Maschell/SDCafiine Download] the latest release of the legacy edition of SDCafiine.
#Extract it and drag the <code>wiiu</code> folder to the root of the SD card and merge it.

|-|Aroma=

#[https://github.com/wiiu-env/sdcafiine_plugin Download] the latest release of the of SDCafiine.
#Copy the file <code>sdcafiine.wps</code> into <code>sd:/wiiu/environments/aroma/plugins</code>

</tabber>

== Usage ==

</noinclude>
<tabber>

|-|Tiramisu=

#Create a folder named <code>sdcafiine</code> on the root of your SD card.
#Find a mod you would like to use. [https://gamebanana.com/ Game Banana] is the best place to get these.
#Find the title ID for your game. You can find it [http://wiiubrew.org/wiki/Title%20database here].
#Create a folder inside of the <code>sdcafiine</code> folder you created earlier with the name being the title ID for whatever game you're modding.
#Drag the <code>content</code> part of your modpack into the folder you just created.
#If you want multiple mod packs, create a folder inside of the game ID for each mod pack.
#Eject the SD card from the PC and put it in the Wii U and power on. Launch the SDCafiine app in the Homebrew Launcher and launch the game you modded.
|-|Aroma=

#Create a folder named <code>sdcafiine</code> inside the <code>wiiu</code> folder on your SD card.
#Find a mod you would like to use. [https://gamebanana.com/ Game Banana] is the best place to get these.
#Find the title ID for your game. You can find it [http://wiiubrew.org/wiki/Title%20database here].
#Create a folder inside of the <code>wiiu/sdcafiine</code> folder you created earlier with the name being the title ID for whatever game you're modding.
#Drag the <code>content</code> part of your modpack into the folder you just created.
#If you want multiple mod packs, create a folder inside of the game ID for each mod pack.
#Eject the SD card from the PC and put it in the Wii U and power on. Laucnh your game of choice and SDCafiine should be automatically launched.

</tabber>

==SD File layout==

</noinclude>
<tabber>

|-|Tiramisu=
{{Tree list}}

* [[File:Gnome-media-flash.svg|20px|link=]] (root)
** [[File:Icons8 flat opened folder.svg|20px|link=]] wiiu
** [[File:Icons8 flat opened folder.svg|20px|link=]] apps
** [[File:Icons8 flat opened folder.svg|20px|link=]] SDCafiine
**** [[File:Icons8 flat file.svg|20px|link=]] '''sdcafiine.elf'''
**** [[File:Icons8 flat file.svg|20px|link=]] '''icon.png'''
**** [[File:Icons8 flat file.svg|20px|link=]] '''meta.xml'''
{{Tree list}}

** [[File:Icons8 flat opened folder.svg|20px|link=]] sdcafiine
*** [[File:Icons8 flat opened folder.svg|20px|link=]] (gameid)
**** [[File:Icons8 flat opened folder.svg|20px|link=]] content
{{Tree list}}

|-|Aroma=
{{Tree list}}
* [[File:Gnome-media-flash.svg|20px|link=]] (root)
** [[File:Icons8 flat opened folder.svg|20px|link=]] wiiu
*** [[File:Icons8 flat opened folder.svg|20px|link=]] sdcafiine
**** [[File:Icons8 flat opened folder.svg|20px|link=]] sdcafiine
***** [[File:Icons8 flat opened folder.svg|20px|link=]] (gameid)
****** [[File:Icons8 flat opened folder.svg|20px|link=]] content
*** [[File:Icons8 flat opened folder.svg|20px|link=]] environments
**** [[File:Icons8 flat opened folder.svg|20px|link=]] aroma
***** [[File:Icons8 flat opened folder.svg|20px|link=]] plugins
****** [[File:Icons8 flat file.svg|20px|link=]] '''sdcafiine.wps'''
***** [[File:Icons8 flat file.svg|20px|link=]] root.rpx
{{Tree list/end}}

</tabber>

User:Javdu/Wii U:SDCafiine

2023-05-13T03:53:43Z

Javdu: /* SD File layout */

{{Infobox homebrew
| developers = Maschell
| forwiiu = 1
| image = Sdcafiine-icon.png
| imagealt = ModMoon logo
| imagesize = 256px
| version = v0.1.2
| website = https://gbatemp.net/threads/sdcafiine.471360/ gbatemp/471630
| github = wiiu-env/sdcafiine_plugin
|
}}

'''SDCafiine''' is a mod manager for the Wii U. It can overwrite textures, audio and much more. It can do mods for any title on the Wii U - including system software for things like custom Themes or reinjecting life into Wara Wara Plaza.

== Installation ==

</noinclude>
<tabber>

|-|Tiramisu=

#[https://github.com/Maschell/SDCafiine Download] the latest release of the legacy edition of SDCafiine.
#Extract it and drag the <code>wiiu</code> folder to the root of the SD card and merge it.

|-|Aroma=

#[https://github.com/wiiu-env/sdcafiine_plugin Download] the latest release of the of SDCafiine.
#Copy the file <code>sdcafiine.wps</code> into <code>sd:/wiiu/environments/aroma/plugins</code>

</tabber>

== Usage ==

</noinclude>
<tabber>

|-|Tiramisu=

#Create a folder named <code>sdcafiine</code> on the root of your SD card.
#Find a mod you would like to use. [https://gamebanana.com/ Game Banana] is the best place to get these.
#Find the title ID for your game. You can find it [http://wiiubrew.org/wiki/Title%20database here].
#Create a folder inside of the <code>sdcafiine</code> folder you created earlier with the name being the title ID for whatever game you're modding.
#Drag the <code>content</code> part of your modpack into the folder you just created.
#If you want multiple mod packs, create a folder inside of the game ID for each mod pack.
#Eject the SD card from the PC and put it in the Wii U and power on. Launch the SDCafiine app in the Homebrew Launcher and launch the game you modded.
|-|Aroma=

#Create a folder named <code>sdcafiine</code> inside the <code>wiiu</code> folder on your SD card.
#Find a mod you would like to use. [https://gamebanana.com/ Game Banana] is the best place to get these.
#Find the title ID for your game. You can find it [http://wiiubrew.org/wiki/Title%20database here].
#Create a folder inside of the <code>wiiu/sdcafiine</code> folder you created earlier with the name being the title ID for whatever game you're modding.
#Drag the <code>content</code> part of your modpack into the folder you just created.
#If you want multiple mod packs, create a folder inside of the game ID for each mod pack.
#Eject the SD card from the PC and put it in the Wii U and power on. Laucnh your game of choice and SDCafiine should be automatically launched.

</tabber>

==SD File layout==

</noinclude>
<tabber>

|-|Tiramisu=
{{Tree list}}

* [[File:Gnome-media-flash.svg|20px|link=]] (root)
** [[File:Icons8 flat opened folder.svg|20px|link=]] wiiu
** [[File:Icons8 flat opened folder.svg|20px|link=]] apps
** [[File:Icons8 flat opened folder.svg|20px|link=]] SDCafiine
**** [[File:Icons8 flat file.svg|20px|link=]] '''sdcafiine.elf'''
**** [[File:Icons8 flat file.svg|20px|link=]] '''icon.png'''
**** [[File:Icons8 flat file.svg|20px|link=]] '''meta.xml'''
{{Tree list}}

** [[File:Icons8 flat opened folder.svg|20px|link=]] sdcafiine
*** [[File:Icons8 flat opened folder.svg|20px|link=]] (gameid)
**** [[File:Icons8 flat opened folder.svg|20px|link=]] content
{{Tree list}}

|-|Aroma=
{{Tree list}}
* [[File:Gnome-media-flash.svg|20px|link=]] (root)
** [[File:Icons8 flat opened folder.svg|20px|link=]] wiiu
*** [[File:Icons8 flat opened folder.svg|20px|link=]] sdcafiine
**** [[File:Icons8 flat opened folder.svg|20px|link=]] sdcafiine
***** [[File:Icons8 flat opened folder.svg|20px|link=]] (gameid)
****** [[File:Icons8 flat opened folder.svg|20px|link=]] content
*** [[File:Icons8 flat opened folder.svg|20px|link=]] environments
**** [[File:Icons8 flat opened folder.svg|20px|link=]] aroma
***** [[File:Icons8 flat opened folder.svg|20px|link=]] plugins
****** [[File:Icons8 flat file.svg|20px|link=]] sdcafiine.wps
***** [[File:Icons8 flat file.svg|20px|link=]] root.rpx
{{Tree list/end}}

</tabber>

User:Javdu/Wii U:SDCafiine

2023-05-13T03:52:10Z

Javdu: silly typos and new file folders

{{Infobox homebrew
| developers = Maschell
| forwiiu = 1
| image = Sdcafiine-icon.png
| imagealt = ModMoon logo
| imagesize = 256px
| version = v0.1.2
| website = https://gbatemp.net/threads/sdcafiine.471360/ gbatemp/471630
| github = wiiu-env/sdcafiine_plugin
|
}}

'''SDCafiine''' is a mod manager for the Wii U. It can overwrite textures, audio and much more. It can do mods for any title on the Wii U - including system software for things like custom Themes or reinjecting life into Wara Wara Plaza.

== Installation ==

</noinclude>
<tabber>

|-|Tiramisu=

#[https://github.com/Maschell/SDCafiine Download] the latest release of the legacy edition of SDCafiine.
#Extract it and drag the <code>wiiu</code> folder to the root of the SD card and merge it.

|-|Aroma=

#[https://github.com/wiiu-env/sdcafiine_plugin Download] the latest release of the of SDCafiine.
#Copy the file <code>sdcafiine.wps</code> into <code>sd:/wiiu/environments/aroma/plugins</code>

</tabber>

== Usage ==

</noinclude>
<tabber>

|-|Tiramisu=

#Create a folder named <code>sdcafiine</code> on the root of your SD card.
#Find a mod you would like to use. [https://gamebanana.com/ Game Banana] is the best place to get these.
#Find the title ID for your game. You can find it [http://wiiubrew.org/wiki/Title%20database here].
#Create a folder inside of the <code>sdcafiine</code> folder you created earlier with the name being the title ID for whatever game you're modding.
#Drag the <code>content</code> part of your modpack into the folder you just created.
#If you want multiple mod packs, create a folder inside of the game ID for each mod pack.
#Eject the SD card from the PC and put it in the Wii U and power on. Launch the SDCafiine app in the Homebrew Launcher and launch the game you modded.
|-|Aroma=

#Create a folder named <code>sdcafiine</code> inside the <code>wiiu</code> folder on your SD card.
#Find a mod you would like to use. [https://gamebanana.com/ Game Banana] is the best place to get these.
#Find the title ID for your game. You can find it [http://wiiubrew.org/wiki/Title%20database here].
#Create a folder inside of the <code>wiiu/sdcafiine</code> folder you created earlier with the name being the title ID for whatever game you're modding.
#Drag the <code>content</code> part of your modpack into the folder you just created.
#If you want multiple mod packs, create a folder inside of the game ID for each mod pack.
#Eject the SD card from the PC and put it in the Wii U and power on. Laucnh your game of choice and SDCafiine should be automatically launched.

</tabber>

==SD File layout==

</noinclude>
<tabber>

|-|Tiramisu=
{{Tree list}}

* [[File:Gnome-media-flash.svg|20px|link=]] (root)
** [[File:Icons8 flat opened folder.svg|20px|link=]] wiiu
** [[File:Icons8 flat opened folder.svg|20px|link=]] apps
** [[File:Icons8 flat opened folder.svg|20px|link=]] SDCafiine
**** [[File:Icons8 flat file.svg|20px|link=]] '''sdcafiine.elf'''
**** [[File:Icons8 flat file.svg|20px|link=]] '''icon.png'''
**** [[File:Icons8 flat file.svg|20px|link=]] '''meta.xml'''
{{Tree list}}

** [[File:Icons8 flat opened folder.svg|20px|link=]] sdcafiine
*** [[File:Icons8 flat opened folder.svg|20px|link=]] (gameid)
**** [[File:Icons8 flat opened folder.svg|20px|link=]] content
{{Tree list}}

|-|Aroma=
�Gnome-media-flash.svg (root):
{{Tree list}}
* [[File:Gnome-media-flash.svg|20px|link=]] (root)
** [[File:Icons8 flat opened folder.svg|20px|link=]] wiiu
*** [[File:Icons8 flat opened folder.svg|20px|link=]] sdcafiine
**** [[File:Icons8 flat opened folder.svg|20px|link=]] sdcafiine
***** [[File:Icons8 flat opened folder.svg|20px|link=]] (gameid)
****** [[File:Icons8 flat opened folder.svg|20px|link=]] content
*** [[File:Icons8 flat opened folder.svg|20px|link=]] environments
**** [[File:Icons8 flat opened folder.svg|20px|link=]] aroma
***** [[File:Icons8 flat opened folder.svg|20px|link=]] plugins
****** [[File:Icons8 flat file.svg|20px|link=]] sdcafiine.wps
***** [[File:Icons8 flat file.svg|20px|link=]] root.rpx
{{Tree list/end}}

</tabber>

User:Javdu/Wii U:SDCafiine

2023-05-13T03:45:44Z

Javdu:

{{Infobox homebrew
| developers = Maschell
| forwiiu = 1
| image = Sdcafiine-icon.png
| imagealt = ModMoon logo
| imagesize = 256px
| version = v0.1.2
| website = https://gbatemp.net/threads/sdcafiine.471360/ gbatemp/471630
| github = wiiu-env/sdcafiine_plugin
|
}}

'''SDCafiine''' is a mod manager for the Wii U. It can overwrite textures, audio and much more. It can do mods for any title on the Wii U - including system software for things like custom Themes or reinjecting life into Wara Wara Plaza.

== Installation ==

</noinclude>
<tabber>

|-|Tiramisu=

#[https://github.com/Maschell/SDCafiine Download] the latest release of the legacy edition of SDCafiine.
#Extract it and drag the <code>wiiu</code> folder to the root of the SD card and merge it.

|-|Aroma=

#[https://github.com/wiiu-env/sdcafiine_plugin Download] the latest release of the of SDCafiine.
#Copy the file <code>sdcafiine.wps</code> into <code>sd:/wiiu/environments/aroma/plugins</code>

</tabber>

== Usage ==

</noinclude>
<tabber>

|-|Tiramisu=

#Create a folder named <code>sdcafiine</code> on the root of your SD card.
#Find a mod you would like to use. [https://gamebanana.com/ Game Banana] is the best place to get these.
#Find the title ID for your game. You can find it [http://wiiubrew.org/wiki/Title%20database here].
#Create a folder inside of the <code>sdcafiine</code> folder you created earlier with the name being the title ID for whatever game you're modding.
#Drag the <code>content</code> part of your modpack into the folder you just created.
#If you want multiple mod packs, create a folder inside of the game ID for each mod pack.
#Eject the SD card from the PC and put it in the Wii U and power on. Launch the SDCafiine app in the Homebrew Launcher and launch the game you modded.
|-|Aroma=

#Create a folder named <code>sdcafiine</code> inside the <code>wiiu</code> folder on your SD card.
#Find a mod you would like to use. [https://gamebanana.com/ Game Banana] is the best place to get these.
#Find the title ID for your game. You can find it [http://wiiubrew.org/wiki/Title%20database here].
#Create a folder inside of the <code>wiiu/sdcafiine</code> folder you created earlier with the name being the title ID for whatever game you're modding.
#Drag the <code>content</code> part of your modpack into the folder you just created.
#If you want multiple mod packs, create a folder inside of the game ID for each mod pack.
#Eject the SD card from the PC and put it in the Wii U and power on. Laucnh your game of choice and SDCafiine should be automatically launched.

</tabber>

==SD File layout==

</noinclude>
<tabber>

|-|Tiramisu=

💾sd:
┗ 📂wiiu
┣ 📂apps
┃ ┣ 📂SDcafiine
┃ ┃ ┣ 📜sdcafiine.elf
┃ ┃ ┣ 📜icon.png
┃ ┃ ┗ 📜meta.xml
┗ 📂sdcafiine
┗ 📂 (gameid)
┗ 📂 content
|-|Aroma=
💾sd:
┗ 📂wiiu
┣ 📂sdcafiine
┃ ┗ 📂sdcafiine
┃ ┗ 📂 (gameid)
┃ ┗ 📂 content
┣ 📂environments
┃ ┗ 📂aroma
┃ ┣ 📂plugins
┃ ┃ ┣ 📜sdcafiine.wps
┃ ┗ 📜root.rpx

</tabber>

User:Javdu/Wii U:SDCafiine

2023-05-13T03:43:59Z

Javdu: gotta learn how to proofread

{{Infobox homebrew
| developers = Maschell
| forwiiu = 1
| image = Sdcafiine-icon.png
| imagealt = ModMoon logo
| imagesize = 256px
| version = v0.1.2
| website = https://gbatemp.net/threads/sdcafiine.471360/ gbatemp/471630
| github = wiiu-env/sdcafiine_plugin
|
}}

'''SDCafiine''' is a mod manager for the Wii U. It can overwrite textures, audio and much more. It can do mods for any title on the Wii U - including system software for things like custom Themes or reinjecting life into Wara Wara Plaza.

== Installation ==

</noinclude>
<tabber>

|-|Tiramisu=

#[https://github.com/Maschell/SDCafiine Download] the latest release of the legacy edition of SDCafiine.
#Extract it and drag the <code>wiiu</code> folder to the root of the SD card and merge it.

|-|Aroma=

#[https://github.com/wiiu_env/SDCafiine Download] the latest release of the of SDCafiine.
#Copy the file <code>sdcafiine.wps</code> into <code>sd:/wiiu/environments/aroma/plugins</code>

</tabber>

== Usage ==

</noinclude>
<tabber>

|-|Tiramisu=

#Create a folder named <code>sdcafiine</code> on the root of your SD card.
#Find a mod you would like to use. [https://gamebanana.com/ Game Banana] is the best place to get these.
#Find the title ID for your game. You can find it [http://wiiubrew.org/wiki/Title%20database here].
#Create a folder inside of the <code>sdcafiine</code> folder you created earlier with the name being the title ID for whatever game you're modding.
#Drag the <code>content</code> part of your modpack into the folder you just created.
#If you want multiple mod packs, create a folder inside of the game ID for each mod pack.
#Eject the SD card from the PC and put it in the Wii U and power on. Launch the SDCafiine app in the Homebrew Launcher and launch the game you modded.
|-|Aroma=

#Create a folder named <code>sdcafiine</code> inside the <code>wiiu</code> folder on your SD card.
#Find a mod you would like to use. [https://gamebanana.com/ Game Banana] is the best place to get these.
#Find the title ID for your game. You can find it [http://wiiubrew.org/wiki/Title%20database here].
#Create a folder inside of the <code>wiiu/sdcafiine</code> folder you created earlier with the name being the title ID for whatever game you're modding.
#Drag the <code>content</code> part of your modpack into the folder you just created.
#If you want multiple mod packs, create a folder inside of the game ID for each mod pack.
#Eject the SD card from the PC and put it in the Wii U and power on. Laucnh your game of choice and SDCafiine should be automatically launched.

</tabber>

==SD File layout==

</noinclude>
<tabber>

|-|Tiramisu=

💾sd:
┗ 📂wiiu
┣ 📂apps
┃ ┣ 📂SDcafiine
┃ ┃ ┣ 📜sdcafiine.elf
┃ ┃ ┣ 📜icon.png
┃ ┃ ┗ 📜meta.xml
┗ 📂sdcafiine
┗ 📂 (gameid)
┗ 📂 content
|-|Aroma=
💾sd:
┗ 📂wiiu
┣ 📂sdcafiine
┃ ┗ 📂sdcafiine
┃ ┗ 📂 (gameid)
┃ ┗ 📂 content
┣ 📂environments
┃ ┗ 📂aroma
┃ ┣ 📂plugins
┃ ┃ ┣ 📜sdcafiine.wps
┃ ┗ 📜root.rpx

</tabber>

User:Javdu/Wii U:SDCafiine

2023-05-13T03:33:55Z

Javdu: oops typ

{{Infobox homebrew
| developers = Maschell
| forwiiu = 1
| image = Sdcafiine-icon.png
| imagealt = ModMoon logo
| imagesize = 256px
| version = v0.1.2
| website = https://gbatemp.net/threads/sdcafiine.471360/ gbatemp/471630
| github = wiiu-env/sdcafiine_plugin
|
}}

'''SDCafiine''' is a mod manager for the Wii U. It can overwrite textures, audio and much more. Tt can do mods for any title on the Wii U - including system software for things like themes or reinjecting life into wara wara plaza.

== Installation ==

</noinclude>
<tabber>

|-|Tiramisu=

#[https://github.com/Maschell/SDCafiine Download] the latest release of the legacy edition of SDCafiine.
#Extract it and drag the <code>wiiu</code> folder to the root of the SD card and merge it.

|-|Aroma=

#[https://github.com/wiiu_env/SDCafiine Download] the latest release of the of SDCafiine.
#Copy the file <code>sdcafiine.wps</code> into <code>sd:/wiiu/environments/aroma/plugins</code>

</tabber>

== Usage ==

</noinclude>
<tabber>

|-|Tiramisu=

#Create a folder named <code>sdcafiine</code> on the root of your SD card.
#Find a mod you would like to use. [https://gamebanana.com/ Game Banana] is the best place to get these.
#Find the title ID for your game. You can find it [http://wiiubrew.org/wiki/Title%20database here].
#Create a folder inside of the <code>sdcafiine</code> folder you created earlier with the name being the title ID for whatever game you're modding.
#Drag the <code>content</code> part of your modpack into the folder you just created.
#If you want multiple mod packs, create a folder inside of the game ID for each mod pack.
#Eject the SD card from the PC and put it in the Wii U and power on. Launch the SDCafiine app in the Homebrew Launcher and launch the game you modded.
|-|Aroma=

#Create a folder named <code>sdcafiine</code> inside the <code>wiiu</code> folder on your SD card.
#Find a mod you would like to use. [https://gamebanana.com/ Game Banana] is the best place to get these.
#Find the title ID for your game. You can find it [http://wiiubrew.org/wiki/Title%20database here].
#Create a folder inside of the <code>wiiu/sdcafiine</code> folder you created earlier with the name being the title ID for whatever game you're modding.
#Drag the <code>content</code> part of your modpack into the folder you just created.
#If you want multiple mod packs, create a folder inside of the game ID for each mod pack.
#Eject the SD card from the PC and put it in the Wii U and power on. Laucnh your game of choice and SDCafiine should be automatically launched.

</tabber>

==SD File layout==

</noinclude>
<tabber>

|-|Tiramisu=

💾sd:
┗ 📂wiiu
┣ 📂apps
┃ ┣ 📂SDcafiine
┃ ┃ ┣ 📜sdcafiine.elf
┃ ┃ ┣ 📜icon.png
┃ ┃ ┗ 📜meta.xml
┗ 📂sdcafiine
┗ 📂 (gameid)
┗ 📂 content
|-|Aroma=
💾sd:
┗ 📂wiiu
┣ 📂sdcafiine
┃ ┗ 📂sdcafiine
┃ ┗ 📂 (gameid)
┃ ┗ 📂 content
┣ 📂environments
┃ ┗ 📂aroma
┃ ┣ 📂plugins
┃ ┃ ┣ 📜sdcafiine.wps
┃ ┗ 📜root.rpx

</tabber>

User:Javdu/Wii U:SDCafiine

2023-05-13T02:35:38Z

Javdu: thats what i get for a dirty copy and paste

{{Infobox homebrew
| developers = Maschell
| forwiiu = 1
| image = Sdcafiine-icon.png
| imagealt = ModMoon logo
| imagesize = 256px
| version = v0.1.2
| website = https://gbatemp.net/threads/sdcafiine.471360/ gbatemp/471630
| github = wiiu-env/sdcafiine_plugin
|
}}

'''SDCafiine''' is a mod manager for the Wii U. It can overwrite textures, audio and much more. Tt can do mods for any title on the Wii U - including system software for things like themes.

== Installation ==

</noinclude>
<tabber>

|-|Tiramisu=

#[https://github.com/Maschell/SDCafiine Download] the latest release of the legacy edition of SDCafiine.
#Extract it and drag the <code>wiiu</code> folder to the root of the SD card and merge it.

|-|Aroma=

#[https://github.com/wiiu_env/SDCafiine Download] the latest release of the of SDCafiine.
#Copy the file <code>sdcafiine.wps</code> into <code>sd:/wiiu/environments/aroma/plugins</code>

</tabber>

== Usage ==

</noinclude>
<tabber>

|-|Tiramisu=

#Create a folder named <code>sdcafiine</code> on the root of your SD card.
#Find a mod you would like to use. [https://gamebanana.com/ Game Banana] is the best place to get these.
#Find the title ID for your game. You can find it [http://wiiubrew.org/wiki/Title%20database here].
#Create a folder inside of the <code>sdcafiine</code> folder you created earlier with the name being the title ID for whatever game you're modding.
#Drag the <code>content</code> part of your modpack into the folder you just created.
#If you want multiple mod packs, create a folder inside of the game ID for each mod pack.
#Eject the SD card from the PC and put it in the Wii U and power on. Launch the SDCafiine app in the Homebrew Launcher and launch the game you modded.
|-|Aroma=

#Create a folder named <code>sdcafiine</code> inside the <code>wiiu</code> folder on your SD card.
#Find a mod you would like to use. [https://gamebanana.com/ Game Banana] is the best place to get these.
#Find the title ID for your game. You can find it [http://wiiubrew.org/wiki/Title%20database here].
#Create a folder inside of the <code>wiiu/sdcafiine</code> folder you created earlier with the name being the title ID for whatever game you're modding.
#Drag the <code>content</code> part of your modpack into the folder you just created.
#If you want multiple mod packs, create a folder inside of the game ID for each mod pack.
#Eject the SD card from the PC and put it in the Wii U and power on. Laucnh your game of choice and SDCafiine should be automatically launched.

</tabber>

==SD File layout==

</noinclude>
<tabber>

|-|Tiramisu=

💾sd:
┗ 📂wiiu
┣ 📂apps
┃ ┣ 📂SDcafiine
┃ ┃ ┣ 📜sdcafiine.elf
┃ ┃ ┣ 📜icon.png
┃ ┃ ┗ 📜meta.xml
┗ 📂sdcafiine
┗ 📂 (gameid)
┗ 📂 content
|-|Aroma=
💾sd:
┗ 📂wiiu
┣ 📂sdcafiine
┃ ┗ 📂sdcafiine
┃ ┗ 📂 (gameid)
┃ ┗ 📂 content
┣ 📂environments
┃ ┗ 📂aroma
┃ ┣ 📂plugins
┃ ┃ ┣ 📜sdcafiine.wps
┃ ┗ 📜root.rpx

</tabber>

User:Javdu

2023-05-13T02:34:10Z

Javdu: Created page with "hello"

hello

User:Javdu/Wii U:SDCafiine

2023-05-13T02:32:14Z

Javdu: created sdcafiine

{{Infobox homebrew
| developers = Maschell
| forwiiu = 1
| image = Sdcafiine-icon.png
| imagealt = ModMoon logo
| imagesize = 256px
| version = v0.1.2
| website = https://gbatemp.net/threads/sdcafiine.471360/ gbatemp/471630
| github = wiiu-env/sdcafiine_plugin
|
}}

'''SDCafiine''' is a mod manager for the Wii U. It can overwrite textures, audio and much more. Tt can do mods for any title on the Wii U - including system software for things like themes.

== Installation ==

</noinclude>
<tabber>

|-|Tiramisu=

#[https://github.com/Maschell/SDCafiine Download] the latest release of the legacy edition of SDCafiine.
#Extract it and drag the <code>wiiu</code> folder to the root of the SD card and merge it.

|-|Aroma=

#[https://github.com/wiiu_env/SDCafiine Download] the latest release of the of SDCafiine.
#Copy the file <code>sdcafiine.wps</code> into <code>sd:/wiiu/environments/aroma/plugins</code>

</tabber>

== Usage ==

</noinclude>
<tabber>

|-|Tiramisu=

#Create a folder named <code>sdcafiine</code> on the root of your SD card.
#Find a mod you would like to use. [https://gamebanana.com/ Game Banana] is the best place to get these.
#Find the title ID for your game. You can find it [http://wiiubrew.org/wiki/Title%20database here].
#Create a folder inside of the <code>sdcafiine</code> folder you created earlier with the name being the title ID for whatever game you're modding.
#Drag the <code>content</code> part of your modpack into the folder you just created.
#If you want multiple mod packs, create a folder inside of the game ID for each mod pack.
#Eject the SD card from the PC and put it in the Wii U and power on. Launch the SDCafiine app in the Homebrew Launcher and launch the game you modded.
|-|Aroma=

#Create a folder named <code>sdcafiine</code> inside the <code>wiiu</code> folder on your SD card.
#Find a mod you would like to use. [https://gamebanana.com/ Game Banana] is the best place to get these.
#Find the title ID for your game. You can find it [http://wiiubrew.org/wiki/Title%20database here].
#Create a folder inside of the <code>wiiu/sdcafiine</code> folder you created earlier with the name being the title ID for whatever game you're modding.
#Drag the <code>content</code> part of your modpack into the folder you just created.
#If you want multiple mod packs, create a folder inside of the game ID for each mod pack.
#Eject the SD card from the PC and put it in the Wii U and power on. Laucnh your game of choice and SDCafiine should be automatically launched.

</tabber>

==SD File layout==

</noinclude>
<tabber>

|-|Tiramisu=

💾sd:
┗ 📂wiiu
┣ 📂apps
┃ ┣ 📂SDcafiine
┃ ┃ ┣ 📜sdcafiine.elf
┃ ┃ ┣ 📜icon.png
┃ ┃ ┗ 📜meta.xml
┗ 📂sdcafiine
┗ 📂 (gameid)
┗ 📂 content
|-|Aroma=
💾sd:
┗ 📂wiiu
┣ 📂sdcafiine
┃ ┗ 📂sdcafiine
┃ ┗ 📂 (gameid)
┃ ┗ 📂 content
┣ 📂environments
┃ ┗ 📂aroma
┃ ┣ 📂plugins
┃ ┃ ┣ 📜sdcafiine.wps
┃ ┗ 📜root.rpx

#[https://github.com/wiiu_env/SDCafiine Download] the latest release of the of SDCafiine.
#Copy the file <code>sdcafiine.wps</code> into <code>sd:/wiiu/environments/aroma/plugins</code>

</tabber>

File:Sdcafiine-icon.png

2023-05-13T01:22:46Z

Javdu: for potential sdcafiine page

== Summary ==
for potential sdcafiine page

3DS:Wireless streaming

2023-05-13T00:12:35Z

Javdu: added cuteNTR for mac

{{shortcut|3DS:STREAM}}
{{Page WIP}}
{{Warning|text=The guides below can't be used to stream DS games, DSiWare, and GBA games. You will need a hardware capture card to do that.}}
{{Critical|text='''This only works for New 3DS.''' If you absolutely want a method for Old 3DS, there is [[/HzMod|HzMod]]. Keep in mind that performance is still very bad and it is not intended for practical use.}}

This page will show you how to stream your New 3DS console's screens to your computer over WiFi.

*Your console and your computer need to be on the same network.
*Streaming audio over WiFi currently isn't possible, you will need to use an AUX cable and a device with Line In to receive audio.
*If you have a poor connection, you may not get the best results. The receiving computer should be connected to the network via ethernet or a 5 GHz connection.

==Finding your Console's IP ==
You'll need to know the local IP address of your 3DS later, so it's a good idea to find it now.
{{3DS:Check local IP address}}

==Streaming with NTR==
{{Info
| text = At the time of writing this, BootNTR Selector is not compatible with the latest standard release of Luma3DS. To combat this, we will be using a custom build with support for BootNTR.
}}
<tabber>
|-|Windows - Snickerstream=
===What You Need===
*Your console's IP from the first section
*The latest release of [https://github.com/RattletraPM/Snickerstream/releases/latest Snickerstream]
*The latest release of [https://github.com/PabloMK7/Luma3DS_3GX/releases/latest Luma3DS 3GX Loader]
*The latest release of [https://github.com/Nanquitas/BootNTR/releases/latest BootNTR Selector]
*[https://github.com/Steveice10/FBI/releases/latest FBI] installed on your console

=== Section I: Prep Work===
#Ensure that your console and your computer are on the same network
# Download and extract the latest Snickerstream <code>.zip</code> file
# Download the latest Luma3DS 3GX Loader <code>boot.firm</code> file
# Download the latest BootNTR Selector <code>.cia</code> file
#Power off your console
# Take the SD card out of your console and put it into your computer
#Replace the <code>boot.firm</code> file on the root of your SD card with the Luma3DS 3GX Loader one you downloaded
# Copy the BootNTR selector <code>.cia</code> file to your SD card
#*You may put this file where you can easily access it
# Put your SD card back into your console

===Section II: Installing CIAs===
# Power on your console
#*If you are prompted with a Luma3DS configuration screen, just press <code>START</code>
#Open FBI
# Press A on <code>SD</code> at the top of your bottom screen
# Find the BootNTR Selector <code>.cia</code> file that you copied, press A on it and select <code>Install and delete CIA</code>
#Press START to exit FBI

===Section III: Streaming===
# Open the Snickerstream <code>.exe</code> file from where you extracted it
#On your console, open the gift that appeared on your home menu and launch BootNTR Selector
#*If you're prompted with 3 buttons on your bottom screen, tap "Use default"
#*If you're prompted to choose an NTR version, choose 3.6
#*Your console's screen should flash some colors, meaning that it's ready for streaming
#Input your console's IP from the first section into the IP box in the Snickerstream window
#*You may also [https://github.com/RattletraPM/Snickerstream/wiki/Settings-101 adjust your settings] to your liking if you wish
#Click <code>Connect!</code> in the Snickerstream window
#*Your console's screens should now be streamed to your computer
|-|macOS - cuteNTR-OSX=
===What You Need===
*Your console's IP from the first section
*The latest release of [https://github.com/EBLeifEricson/cuteNTR-OSX/releases/tag/0.3.2 cuteNTR]
*The latest release of [https://github.com/PabloMK7/Luma3DS_3GX/releases/latest Luma3DS 3GX Loader]
*The latest release of [https://github.com/Nanquitas/BootNTR/releases/latest BootNTR Selector]
*[https://github.com/Steveice10/FBI/releases/latest FBI] installed on your console

=== Section I: Prep Work===
#Ensure that your console and your computer are on the same network
# Download <code>cuteNTR-0.3.2.dmg</code> and launch it. You do not need to drag cuteNTR to the apps folder for it work properly.
# Download the latest Luma3DS 3GX Loader <code>boot.firm</code> file
# Download the latest BootNTR Selector <code>.cia</code> file
#Power off your console
# Take the SD card out of your console and put it into your computer
#Replace the <code>boot.firm</code> file on the root of your SD card with the Luma3DS 3GX Loader one you downloaded
# Copy the BootNTR selector <code>.cia</code> file to your SD card
#*You may put this file where you can easily access it
# Put your SD card back into your console

===Section II: Installing CIAs===
# Power on your console
#*If you are prompted with a Luma3DS configuration screen, just press START
#Open FBI
# Press A on <code>SD</code> at the top of your bottom screen
# Find the BootNTR Selector <code>.cia</code> file that you copied, press A on it and select <code>Install and delete CIA</code>
#Press START to exit FBI

===Section III: Streaming===
#On your console, open the gift that appeared on your home menu and launch BootNTR Selector
#*If you're prompted with 3 buttons on your bottom screen, tap "Use default"
#*If you're prompted to choose an NTR version, choose 3.6
#*Your console's screen should flash some colors, meaning that it's ready for streaming
#Input your console's IP from the first section into the IP box in the cuteNTR window
#Click <code>Connect!</code> in the Snickerstream window
#*Your console's screens should now be streamed to your computer. The top and bottom screens will be 2 different windows. If you cannot find them, on the dock right click cuteNTR and select "Show All Windows"
|-|Debian Linux - cuteNTR=
===What You Need===
*Your console's IP from the first section
*sudo
*The latest release of [https://github.com/PabloMK7/Luma3DS_3GX/releases/latest Luma3DS 3GX Loader]
*The latest release of [https://github.com/Nanquitas/BootNTR/releases/latest BootNTR Selector]
*[https://github.com/Steveice10/FBI/releases/latest FBI] installed on your console

=== Section I: Prep Work===

#Ensure that your console and your computer are on the same network
# Download the latest Luma3DS 3GX Loader <code>boot.firm</code> file
# Download the latest BootNTR Selector <code>.cia</code> file
#Power off your console
# Take the SD card out of your console and put it into your computer
#Replace the <code>boot.firm</code> file on the root of your SD card with the Luma3DS 3GX Loader one you downloaded
# Copy the BootNTR selector <code>.cia</code> file to your SD card
#*You may put this file where you can easily access it
# Put your SD card back into your console

=== Section II: installing cuteNTR===
This section will add a [https://askubuntu.com/a/4990 PPA] to your sources in order to install cuteNTR. Proceed on your own risk.
# Open the terminal
# Run <code>sudo add-apt-repository ppa:joenosie/3ds</code> to add the PPA to your sources
# Run <code>sudo apt update && sudo apt upgrade</code> to update your setup
# Run <code>sudo apt install cutentr</code> to install cuteNTR

===Section III: Installing CIAs===
# Power on your console
#*If you are prompted with a Luma3DS configuration screen, just press START
#Open FBI
# Press A on <code>SD</code> at the top of your bottom screen
# Find the BootNTR Selector <code>.cia</code> file that you copied, press A on it and select <code>Install and delete CIA</code>
#Press START to exit FBI

===Section IV: Streaming===
# Launch cuteNTR, either from your window manager or with <code>cutentr</code> in the terminal
#On your console, open the gift that appeared on your home menu and launch BootNTR Selector
#*If you're prompted with 3 buttons on your bottom screen, tap "Use default"
#*If you're prompted to choose an NTR version, choose 3.6
#*Your console's screen should flash some colors, meaning that it's ready for streaming
#Input your console's IP from the first section into the IP box next to the <code>Stream</code> button
#Click <code>Stream</code> in the cuteNTR window
#*Your console's screens should now be streamed to your computer

|-|Arch Linux - cuteNTR=
===What You Need===
*Your console's IP from the first section
*sudo
*The latest release of [https://github.com/PabloMK7/Luma3DS_3GX/releases/latest Luma3DS 3GX Loader]
*The latest release of [https://github.com/Nanquitas/BootNTR/releases/latest BootNTR Selector]
*[https://github.com/Steveice10/FBI/releases/latest FBI] installed on your console

=== Section I: Prep Work===

#Ensure that your console and your computer are on the same network
# Download the latest Luma3DS 3GX Loader <code>boot.firm</code> file
# Download the latest BootNTR Selector <code>.cia</code> file
#Power off your console
# Take the SD card out of your console and put it into your computer
#Replace the <code>boot.firm</code> file on the root of your SD card with the Luma3DS 3GX Loader one you downloaded
# Copy the BootNTR selector <code>.cia</code> file to your SD card
#*You may put this file where you can easily access it
# Put your SD card back into your console

=== Section II: Installing cuteNTR===
This is a small tutorial for installing the popular AUR helper [https://github.com/Jguer/yay yay] and installing cuteNTR with it. If you already have a working AUR helper, or know how to install AUR packages in general, you can download and make <code>cutentr-git</code> yourself, then continue with the next section.

# Open the terminal
# Run <code>sudo pacman -S --needed git base-devel</code> to make sure that you have the base-devel package group and git installed
#* Confirm your password if prompted
# Run <code>git clone https://aur.archlinux.org/yay.git</code>
# Run <code>cd yay</code>
# Run <code>makepkg -si</code> to install yay
#* Confirm your password if prompted
# Run <code>yay -S cutentr-git</code> to install cuteNTR
#* Confirm your password if prompted

===Section III: Installing CIAs===
# Power on your console
#*If you are prompted with a Luma3DS configuration screen, just press START
#Open FBI
# Press A on <code>SD</code> at the top of your bottom screen
# Find the BootNTR Selector <code>.cia</code> file that you copied, press A on it and select <code>Install and delete CIA</code>
#Press START to exit FBI

===Section IV: Streaming===
# Launch cuteNTR, either from your window manager or with <code>cutentr</code> in the terminal
#On your console, open the gift that appeared on your home menu and launch BootNTR Selector
#*If you're prompted with 3 buttons on your bottom screen, tap "Use default"
#*If you're prompted to choose an NTR version, choose 3.6
#*Your console's screen should flash some colors, meaning that it's ready for streaming
#Input your console's IP from the first section into the IP box next to the <code>Stream</code> button
#Click <code>Stream</code> in the cuteNTR window
#*Your console's screens should now be streamed to your computer

|-|Other Linux - cuteNTR=
===What You Need===
*Your console's IP from the first section
*The latest release of [https://flatpak.org/setup/ flatpak] installed on your computer for your operating system
*The latest release of [https://github.com/PabloMK7/Luma3DS_3GX/releases/latest Luma3DS 3GX Loader]
*The latest release of [https://github.com/Nanquitas/BootNTR/releases/latest BootNTR Selector]
*[https://github.com/Steveice10/FBI/releases/latest FBI] installed on your console

=== Section I: Prep Work===

#Ensure that your console and your computer are on the same network
# Download the latest Luma3DS 3GX Loader <code>boot.firm</code> file
# Download the latest BootNTR Selector <code>.cia</code> file
#Power off your console
# Take the SD card out of your console and put it into your computer
#Replace the <code>boot.firm</code> file on the root of your SD card with the Luma3DS 3GX Loader one you downloaded
# Copy the BootNTR selector <code>.cia</code> file to your SD card
#*You may put this file where you can easily access it
# Put your SD card back into your console

=== Section II: Installing cuteNTR

# Open the terminal
# Run <code>mkdir cuteNTR && cd cuteNTR</code> to make a new directory and go into it
# Run <code>wget https://gitlab.com/BoltsJ/cuteNTR/uploads/da6b5bafbab68b45cc9bee0ae590a3ca/com.gitlab.BoltsJ.cuteNTR.flatpak</code>
# Run <code>flatpak install com.gitlab.BoltsJ.cuteNTR.flatpak</code> to install cuteNTR
# Confirm your password and all other prompts with yes
# Run <code>cd .. && rm -r cuteNTR</code> to delete the directory

===Section III: Installing CIAs===
# Power on your console
#*If you are prompted with a Luma3DS configuration screen, just press START
#Open FBI
# Press A on <code>SD</code> at the top of your bottom screen
# Find the BootNTR Selector <code>.cia</code> file that you copied, press A on it and select <code>Install and delete CIA</code>
#Press START to exit FBI

===Section IV: Streaming===
# Launch cuteNTR by running <code>flatpak run com.gitlab.BoltsJ.cuteNTR</code>
#On your console, open the gift that appeared on your home menu and launch BootNTR Selector
#*If you're prompted with 3 buttons on your bottom screen, tap "Use default"
#*If you're prompted to choose an NTR version, choose 3.6
#*Your console's screen should flash some colors, meaning that it's ready for streaming
#Input your console's IP from the first section into the IP box next to the <code>Stream</code> button
#Click <code>Stream</code> in the cuteNTR window
#*Your console's screens should now be streamed to your computer

</tabber>

==Using Line In to Receive Audio==
===What You Need===

*A 3.5mm to 3.5mm audio cable
*An audio in (line in or microphone in) port on your computer
**Some computers have a single "headphone" port that can be used for both audio output and input. To use one of these, you will need a Y splitter

===How to use===

#Connect your 3DS to your computer's audio input port with a 3.5mm to 3.5mm audio cable
#Pipe the audio from your audio input port into the software you intend to use
#*The exact steps will depend on the software you're using
#*If you are recording or streaming your game using [https://obsproject.com/ OBS], add a new Audio Input Capture
#*If you are streaming your game via a service such as Discord, you will need to use software such as [https://vb-audio.com/Voicemeeter/ Voicemeeter] to mix your microphone and 3DS audio inputs together
#**If you do not wish to speak while streaming, simply point the app at the 3DS's audio device
#**If you do not wish to mix your microphone and 3DS audio inputs together, you can set up a scene using [https://obsproject.com/ OBS], create a Windowed Projector Preview and share on Discord that window. Then, in [https://obsproject.com/kb/audio-mixer-guide#setting-audio-levels Advanced Audio Properties], turn on the Audio Monitoring for the 3DS Audio Input Capture so that viewers on Discord can hear the 3DS audio. Note that this last step will direct the 3DS audio also to your audio output device (headphones/speakers).
#*To simply listen to the audio, you can [https://www.tenforums.com/tutorials/126383-listen-microphone-through-playback-device-windows.html listen to the audio input device in Windows]

==Troubleshooting==

#*Games such as those in the Pokemon series, Smash Bros 3DS and many more will crash instantly uponing trying to load or after a loading screen. To avoid this issue, ensure that the debugger is enabled. To do this see [[3DS:Check local IP address|this]] page.

==Credits==

[[Category:Nintendo 3DS guides]]

SD Clean/Mac

2023-05-06T04:44:22Z

Javdu: /* Disk Utility */

{{Page WIP|notes=Add instructions for formatting via Disk Utility's GUI on macOS versions 10.10 and before.}}
This is an add-on section for completely recreating an SD card's filesystem using Disk Utility. This should only be done if formatting does not fix your issue or is not possible for some reason.

This page is for Mac users only. If you are not on Mac, see the [[SD Clean/Windows|Windows]] and/or [[SD Clean/Linux|Linux]] pages instead.

== Instructions ==

{{warning|Before beginning these steps, copy all of your SD card's contents to a folder on your computer.}}

=== Terminal ===
# Open the Terminal app.
# Type <code>diskutil list external physical</code>, then find the SD card and take note of its disk name. It will look like <code>disk2</code> or <code>disk3</code>.
# Once you are sure of the SD card's disk name, type <code>diskutil unmountDisk /dev/disk#</code>, where # is the number in the disk name you found.
#* If the system cannot unmount the disk, type <code>diskutil unmountDisk /force /dev/disk#</code> to forcibly unmount it.
# Type <code>diskutil eraseDisk FAT32 NAME MBRFormat /dev/disk#</code>.
#* Replace <code>#</code> with the disk number, and replace <code>NAME</code> with any name that does not begin with <code>3ds</code>.
# Once the format is complete, copy your data back onto the SD card.

=== Disk Utility ===
Choose your macOS version, as the instructions differ between versions.
<tabber>

|-|10.14 or higher=
# Double-click Disk Utility in the <code>/Applications/Utilities</code> folder.
# Choose View > Show All Devices.
# In the sidebar, select the storage device you want to erase, then click the Erase button.
# Click the Scheme pop-up menu, then choose Master Boot Record.
#* If the Scheme pop-up menu is not available, make sure you selected the storage device you want to erase — it’s at the top of the hierarchy.
# Click the Format pop-up menu, then choose <code>MS-DOS (FAT)</code>>.
# Enter a name for the new partition.
# Click Erase, then click Done.
# Once the format is complete, copy your data back onto the SD card.

|-|10.11-10.13=
# Double-click Disk Utility in the <code>/Applications/Utilities</code> folder.
# Choose View > Show All Devices.
# In the sidebar, select the storage device you want to erase.
# Eject each volume on the disk (select the volume in the sidebar, then click the Eject button), then click the Erase button once all volumes are unmounted.
# Click the Format pop-up menu, then choose <code>MS-DOS (FAT)</code>>.
# Enter a name for the new partition.
# Click Erase, then click Done.
# Once the format is complete, copy your data back onto the SD card.

|-|10.10 or lower=
# Navigate to Disk Utility. To do this, press <code>Command</code> + <code>Space</code> and search for "Disk Utility"
# Select your SD card
# Click <code>Erase</code> this option should be on the top
# Name it whatever and make the format <code>MS-DOS (FAT)</code>
# Click Erase then done.
# Once the format is complete, copy your data back onto the SD card.
</tabber>

[[Category:General guides]]

3DS:PKSM

2023-04-23T19:11:43Z

Javdu:

{{Page WIP|notes=
*Needs a feature list. Maybe this could just be copied from the github readme?
*Links to various parts of the github wiki would probably be helpful: https://github.com/FlagBrew/PKSM/wiki}}{{Infobox homebrew
| developers = FlagBrew
| for3ds = 1
| image = PKSM-Banner.png
| imagealt = PKSM banner on the Home Menu
| version = 10.0.0
| github = FlagBrew/PKSM
| githubtag = tag/10.0.0
}}
'''PKSM''' is a save manager for Pokémon games. It supports generations 1 to 8.

== Features ==

* Generate Pokemon
* Legalize Pokemon
* Has a built in bank to move Pokemon from different generations
* Has an item editor

== Installation ==

=== Install with FBI ===

{{FBI QR code
| name1 = CIA
| url1 = https://github.com/FlagBrew/PKSM/releases/download/10.0.0/PKSM.cia
| name2 = 3DSX
| url2 = https://github.com/FlagBrew/PKSM/releases/download/10.0.0/PKSM.3dsx
}}

=== Manually as 3DSX ===
* {{GitHub|FlagBrew/PKSM/releases/latest|Download the latest release}}
* Copy <code>PKSM.3dsx</code> to the <code>/3ds/</code> folder on your SD card

=== Manually as CIA ===
{{GitHub|FlagBrew/Checkpoint/releases/latest|Download the latest release}} and install it using a CIA installer such as [[3DS:FBI|FBI]].

== Usage ==

The [https://github.com/FlagBrew/PKSM/wiki PKSM wiki] documents how to use the application.

[[Category:Pokémon]]
{{Pokémon}}
{{Short description|Pokémon homebrew save manager for generations 3 to 8}}

3DS:Wireless streaming

2023-04-23T19:02:19Z

Javdu: /* Troubleshooting */

{{shortcut|3DS:STREAM}}
{{Page WIP}}
{{Warning|text=The guides below can't be used to stream DS games, DSiWare, and GBA games. You will need a hardware capture card to do that.}}
{{Critical|text='''This only works for New 3DS.''' If you absolutely want a method for Old 3DS, there is [[/HzMod|HzMod]]. Keep in mind that performance is still very bad and it is not intended for practical use.}}

This page will show you how to stream your New 3DS console's screens to your computer over WiFi.

*Your console and your computer need to be on the same network.
*Streaming audio over WiFi currently isn't possible, you will need to use an AUX cable and a device with Line In to receive audio.
*If you have a poor connection, you may not get the best results. The receiving computer should be connected to the network via ethernet or a 5 GHz connection.

==Finding your Console's IP ==
You'll need to know the local IP address of your 3DS later, so it's a good idea to find it now.
{{3DS:Check local IP address}}

==Streaming with NTR==
{{Info
| text = At the time of writing this, BootNTR Selector is not compatible with the latest standard release of Luma3DS. To combat this, we will be using a custom build with support for BootNTR.
}}
<tabber>
|-|Windows - Snickerstream=
===What You Need===
*Your console's IP from the first section
*The latest release of [https://github.com/RattletraPM/Snickerstream/releases/latest Snickerstream]
*The latest release of [https://github.com/Nanquitas/Luma3DS/releases/latest Luma3DS 3GX Loader]
*The latest release of [https://github.com/Nanquitas/BootNTR/releases/latest BootNTR Selector]
*[https://github.com/Steveice10/FBI/releases/latest FBI] installed on your console

=== Section I: Prep Work===
#Ensure that your console and your computer are on the same network
# Download and extract the latest Snickerstream <code>.zip</code> file
# Download the latest Luma3DS 3GX Loader <code>boot.firm</code> file
# Download the latest BootNTR Selector <code>.cia</code> file
#Power off your console
# Take the SD card out of your console and put it into your computer
#Replace the <code>boot.firm</code> file on the root of your SD card with the Luma3DS 3GX Loader one you downloaded
# Copy the BootNTR selector <code>.cia</code> file to your SD card
#*You may put this file where you can easily access it
# Put your SD card back into your console

===Section II: Installing CIAs===
# Power on your console
#*If you are prompted with a Luma3DS configuration screen, just press START
#Open FBI
# Press A on <code>SD</code> at the top of your bottom screen
# Find the BootNTR Selector <code>.cia</code> file that you copied, press A on it and select <code>Install and delete CIA</code>
#Press START to exit FBI

===Section III: Streaming===
# Open the Snickerstream <code>.exe</code> file from where you extracted it
#On your console, open the gift that appeared on your home menu and launch BootNTR Selector
#*If you're prompted with 3 buttons on your bottom screen, tap "Use default"
#*If you're prompted to choose an NTR version, choose 3.6
#*Your console's screen should flash some colors, meaning that it's ready for streaming
#Input your console's IP from the first section into the IP box in the Snickerstream window
#*You may also [https://github.com/RattletraPM/Snickerstream/wiki/Settings-101 adjust your settings] to your liking if you wish
#Click <code>Connect!</code> in the Snickerstream window
#*Your console's screens should now be streamed to your computer
|-|macOS - cuteNTR-OSX=
{{Page WIP}}
|-|Debian Linux - cuteNTR=
===What You Need===
*Your console's IP from the first section
*sudo
*The latest release of [https://github.com/Nanquitas/Luma3DS/releases/latest Luma3DS 3GX Loader]
*The latest release of [https://github.com/Nanquitas/BootNTR/releases/latest BootNTR Selector]
*[https://github.com/Steveice10/FBI/releases/latest FBI] installed on your console

=== Section I: Prep Work===

#Ensure that your console and your computer are on the same network
# Download the latest Luma3DS 3GX Loader <code>boot.firm</code> file
# Download the latest BootNTR Selector <code>.cia</code> file
#Power off your console
# Take the SD card out of your console and put it into your computer
#Replace the <code>boot.firm</code> file on the root of your SD card with the Luma3DS 3GX Loader one you downloaded
# Copy the BootNTR selector <code>.cia</code> file to your SD card
#*You may put this file where you can easily access it
# Put your SD card back into your console

=== Section II: installing cuteNTR===
This section will add a [https://askubuntu.com/a/4990 PPA] to your sources in order to install cuteNTR. Proceed on your own risk.
# Open the terminal
# Run <code>sudo add-apt-repository ppa:joenosie/3ds</code> to add the PPA to your sources
# Run <code>sudo apt update && sudo apt upgrade</code> to update your setup
# Run <code>sudo apt install cutentr</code> to install cuteNTR

===Section III: Installing CIAs===
# Power on your console
#*If you are prompted with a Luma3DS configuration screen, just press START
#Open FBI
# Press A on <code>SD</code> at the top of your bottom screen
# Find the BootNTR Selector <code>.cia</code> file that you copied, press A on it and select <code>Install and delete CIA</code>
#Press START to exit FBI

===Section IV: Streaming===
# Launch cuteNTR, either from your window manager or with <code>cutentr</code> in the terminal
#On your console, open the gift that appeared on your home menu and launch BootNTR Selector
#*If you're prompted with 3 buttons on your bottom screen, tap "Use default"
#*If you're prompted to choose an NTR version, choose 3.6
#*Your console's screen should flash some colors, meaning that it's ready for streaming
#Input your console's IP from the first section into the IP box next to the <code>Stream</code> button
#Click <code>Stream</code> in the cuteNTR window
#*Your console's screens should now be streamed to your computer

|-|Arch Linux - cuteNTR=
===What You Need===
*Your console's IP from the first section
*sudo
*The latest release of [https://github.com/Nanquitas/Luma3DS/releases/latest Luma3DS 3GX Loader]
*The latest release of [https://github.com/Nanquitas/BootNTR/releases/latest BootNTR Selector]
*[https://github.com/Steveice10/FBI/releases/latest FBI] installed on your console

=== Section I: Prep Work===

#Ensure that your console and your computer are on the same network
# Download the latest Luma3DS 3GX Loader <code>boot.firm</code> file
# Download the latest BootNTR Selector <code>.cia</code> file
#Power off your console
# Take the SD card out of your console and put it into your computer
#Replace the <code>boot.firm</code> file on the root of your SD card with the Luma3DS 3GX Loader one you downloaded
# Copy the BootNTR selector <code>.cia</code> file to your SD card
#*You may put this file where you can easily access it
# Put your SD card back into your console

=== Section II: Installing cuteNTR===
This is a small tutorial for installing the popular AUR helper [https://github.com/Jguer/yay yay] and installing cuteNTR with it. If you already have a working AUR helper, or know how to install AUR packages in general, you can download and make <code>cutentr-git</code> yourself, then continue with the next section.

# Open the terminal
# Run <code>sudo pacman -S --needed git base-devel</code> to make sure that you have the base-devel package group and git installed
#* Confirm your password if prompted
# Run <code>git clone https://aur.archlinux.org/yay.git</code>
# Run <code>cd yay</code>
# Run <code>makepkg -si</code> to install yay
#* Confirm your password if prompted
# Run <code>yay -S cutentr-git</code> to install cuteNTR
#* Confirm your password if prompted

===Section III: Installing CIAs===
# Power on your console
#*If you are prompted with a Luma3DS configuration screen, just press START
#Open FBI
# Press A on <code>SD</code> at the top of your bottom screen
# Find the BootNTR Selector <code>.cia</code> file that you copied, press A on it and select <code>Install and delete CIA</code>
#Press START to exit FBI

===Section IV: Streaming===
# Launch cuteNTR, either from your window manager or with <code>cutentr</code> in the terminal
#On your console, open the gift that appeared on your home menu and launch BootNTR Selector
#*If you're prompted with 3 buttons on your bottom screen, tap "Use default"
#*If you're prompted to choose an NTR version, choose 3.6
#*Your console's screen should flash some colors, meaning that it's ready for streaming
#Input your console's IP from the first section into the IP box next to the <code>Stream</code> button
#Click <code>Stream</code> in the cuteNTR window
#*Your console's screens should now be streamed to your computer

|-|Other Linux - cuteNTR=
===What You Need===
*Your console's IP from the first section
*The latest release of [https://flatpak.org/setup/ flatpak] installed on your computer for your operating system
*The latest release of [https://github.com/Nanquitas/Luma3DS/releases/latest Luma3DS 3GX Loader]
*The latest release of [https://github.com/Nanquitas/BootNTR/releases/latest BootNTR Selector]
*[https://github.com/Steveice10/FBI/releases/latest FBI] installed on your console

=== Section I: Prep Work===

#Ensure that your console and your computer are on the same network
# Download the latest Luma3DS 3GX Loader <code>boot.firm</code> file
# Download the latest BootNTR Selector <code>.cia</code> file
#Power off your console
# Take the SD card out of your console and put it into your computer
#Replace the <code>boot.firm</code> file on the root of your SD card with the Luma3DS 3GX Loader one you downloaded
# Copy the BootNTR selector <code>.cia</code> file to your SD card
#*You may put this file where you can easily access it
# Put your SD card back into your console

=== Section II: Installing cuteNTR

# Open the terminal
# Run <code>mkdir cuteNTR && cd cuteNTR</code> to make a new directory and go into it
# Run <code>wget https://gitlab.com/BoltsJ/cuteNTR/uploads/da6b5bafbab68b45cc9bee0ae590a3ca/com.gitlab.BoltsJ.cuteNTR.flatpak</code>
# Run <code>flatpak install com.gitlab.BoltsJ.cuteNTR.flatpak</code> to install cuteNTR
# Confirm your password and all other prompts with yes
# Run <code>cd .. && rm -r cuteNTR</code> to delete the directory

===Section III: Installing CIAs===
# Power on your console
#*If you are prompted with a Luma3DS configuration screen, just press START
#Open FBI
# Press A on <code>SD</code> at the top of your bottom screen
# Find the BootNTR Selector <code>.cia</code> file that you copied, press A on it and select <code>Install and delete CIA</code>
#Press START to exit FBI

===Section IV: Streaming===
# Launch cuteNTR by running <code>flatpak run com.gitlab.BoltsJ.cuteNTR</code>
#On your console, open the gift that appeared on your home menu and launch BootNTR Selector
#*If you're prompted with 3 buttons on your bottom screen, tap "Use default"
#*If you're prompted to choose an NTR version, choose 3.6
#*Your console's screen should flash some colors, meaning that it's ready for streaming
#Input your console's IP from the first section into the IP box next to the <code>Stream</code> button
#Click <code>Stream</code> in the cuteNTR window
#*Your console's screens should now be streamed to your computer

</tabber>

==Using Line In to Receive Audio==
===What You Need===

*A 3.5mm to 3.5mm audio cable
*An audio in (line in or microphone in) port on your computer
**Some computers have a single "headphone" port that can be used for both audio output and input. To use one of these, you will need a Y splitter

===How to use===

#Connect your 3DS to your computer's audio input port with a 3.5mm to 3.5mm audio cable
#Pipe the audio from your audio input port into the software you intend to use
#*The exact steps will depend on the software you're using
#*If you are recording or streaming your game using [https://obsproject.com/ OBS], add a new Audio Input Capture
#*If you are streaming your game via a service such as Discord, you will need to use software such as [https://vb-audio.com/Voicemeeter/ Voicemeeter] to mix your microphone and 3DS audio inputs together
#**If you do not wish to speak while streaming, simply point the app at the 3DS's audio device
#**If you do not wish to mix your microphone and 3DS audio inputs together, you can set up a scene using [https://obsproject.com/ OBS], create a Windowed Projector Preview and share on Discord that window. Then, in [https://obsproject.com/kb/audio-mixer-guide#setting-audio-levels Advanced Audio Properties], turn on the Audio Monitoring for the 3DS Audio Input Capture so that viewers on Discord can hear the 3DS audio. Note that this last step will direct the 3DS audio also to your audio output device (headphones/speakers).
#*To simply listen to the audio, you can [https://www.tenforums.com/tutorials/126383-listen-microphone-through-playback-device-windows.html listen to the audio input device in Windows]

==Troubleshooting==

#*Games such as those in the Pokemon series, Smash Bros 3DS and many more will crash instantly uponing trying to load or after a loading screen. To avoid this issue, ensure that the debugger is enabled. To do this see [[3DS:Check local IP address|this]] page.

==Credits==

[[Category:Nintendo 3DS guides]]